https://www.outbackpower.com/downloads/documents/appnotes/fndc_field_cal_app_note.pdf
On Tue, Apr 27, 2021 at 11:38 AM Mac Lewis <maclew...@gmail.com> wrote: > Do you have a flexnet DC? I believe that is the master voltage indicator > that's displayed on the mate. There is an adjustment potentiometer for that > in the flexnet. Search for flexnet DC calibration and you will see a > document from outback for that. > > This can make a huge difference for accurate soc calcs for lithium. > > > > > > On Tue, Apr 27, 2021, 9:00 AM Dan Fink <danbo...@gmail.com> wrote: > >> Bill; The Mate 3s has calibration offset screens for both the inverter(s) >> and charge controller(s). >> >> Main menu -> Settings -> Inverter -> Calibrate (#13) >> Main menu -> Settings -> Charge Controller -> Calibrate (#8) >> >> Dan Fink >> Owner, Buckville Energy Consulting LLC >> IREC Certified Instructor for PV and Small Wind Installation >> NABCEP Certified PV System Inspector >> NABCEP PV Associate >> d <dan.f...@greendustrialtraining.com>anbo...@gmail.com >> 970-672-4342 >> >> >> >> >> On Tue, Apr 27, 2021 at 8:39 AM frenergy <frene...@psln.com> wrote: >> >>> We're setting up charge points for a new pack of SimpliPhi 3.8 >>> batteries. Needed to use the voltage "offset" function in the FM80's a >>> bit to jive with the 2, Fluke 87 meters we got testing the actual >>> voltage at the battery bus bars. However. the Mate3s is reading .6 >>> volts high and can't find an offset function in the Mate's menus. >>> Anybody familiar with the path to get there, if its there? Assuming the >>> Mate uses the voltage readings its showing on the display, this could >>> have a significant impact on battery health. Do I need to calibrate >>> both my Flukes?...or buy a new Fluke that's not 22 years old? >>> >>> Bill >>> >>> Feather River Solar Electric >>> Bill Battagin, Owner >>> 4291 Nelson St. >>> <https://www.google.com/maps/search/4291+Nelson+St.+%0D%0ATaylorsville,+CA+95983?entry=gmail&source=g> >>> Taylorsville, CA 95983 >>> <https://www.google.com/maps/search/4291+Nelson+St.+%0D%0ATaylorsville,+CA+95983?entry=gmail&source=g> >>> 530.284.7849 >>> CA Lic 874049 >>> www.frenergy.net >>> >>> >>> -- >>> This email has been checked for viruses by Avast antivirus software. >>> https://www.avast.com/antivirus >>> >>> >>> _______________________________________________ >>> List sponsored by Redwood Alliance >>> >>> Pay optional member dues here: http://re-wrenches.org >>> >>> List Address: RE-wrenches@lists.re-wrenches.org >>> >>> Change listserver email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> There are two list archives for searching. When one doesn't work, try >>> the other: >>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >>> >>> List rules & etiquette: >>> http://www.re-wrenches.org/etiquette.htm >>> >>> Check out or update participant bios: >>> http://www.members.re-wrenches.org >>> >>> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > -- Chris Sparadeo C_802-369-4458 H_802-728-3059
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
