Bill; The Mate 3s has calibration offset screens for both the inverter(s) and charge controller(s).
Main menu -> Settings -> Inverter -> Calibrate (#13) Main menu -> Settings -> Charge Controller -> Calibrate (#8) Dan Fink Owner, Buckville Energy Consulting LLC IREC Certified Instructor for PV and Small Wind Installation NABCEP Certified PV System Inspector NABCEP PV Associate d <dan.f...@greendustrialtraining.com>anbo...@gmail.com 970-672-4342 On Tue, Apr 27, 2021 at 8:39 AM frenergy <frene...@psln.com> wrote: > We're setting up charge points for a new pack of SimpliPhi 3.8 > batteries. Needed to use the voltage "offset" function in the FM80's a > bit to jive with the 2, Fluke 87 meters we got testing the actual > voltage at the battery bus bars. However. the Mate3s is reading .6 > volts high and can't find an offset function in the Mate's menus. > Anybody familiar with the path to get there, if its there? Assuming the > Mate uses the voltage readings its showing on the display, this could > have a significant impact on battery health. Do I need to calibrate > both my Flukes?...or buy a new Fluke that's not 22 years old? > > Bill > > Feather River Solar Electric > Bill Battagin, Owner > 4291 Nelson St. > Taylorsville, CA 95983 > 530.284.7849 > CA Lic 874049 > www.frenergy.net > > > -- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
