Do you have a flexnet DC? I believe that is the master voltage indicator that's displayed on the mate. There is an adjustment potentiometer for that in the flexnet. Search for flexnet DC calibration and you will see a document from outback for that.
This can make a huge difference for accurate soc calcs for lithium. On Tue, Apr 27, 2021, 9:00 AM Dan Fink <danbo...@gmail.com> wrote: > Bill; The Mate 3s has calibration offset screens for both the inverter(s) > and charge controller(s). > > Main menu -> Settings -> Inverter -> Calibrate (#13) > Main menu -> Settings -> Charge Controller -> Calibrate (#8) > > Dan Fink > Owner, Buckville Energy Consulting LLC > IREC Certified Instructor for PV and Small Wind Installation > NABCEP Certified PV System Inspector > NABCEP PV Associate > d <dan.f...@greendustrialtraining.com>anbo...@gmail.com > 970-672-4342 > > > > > On Tue, Apr 27, 2021 at 8:39 AM frenergy <frene...@psln.com> wrote: > >> We're setting up charge points for a new pack of SimpliPhi 3.8 >> batteries. Needed to use the voltage "offset" function in the FM80's a >> bit to jive with the 2, Fluke 87 meters we got testing the actual >> voltage at the battery bus bars. However. the Mate3s is reading .6 >> volts high and can't find an offset function in the Mate's menus. >> Anybody familiar with the path to get there, if its there? Assuming the >> Mate uses the voltage readings its showing on the display, this could >> have a significant impact on battery health. Do I need to calibrate >> both my Flukes?...or buy a new Fluke that's not 22 years old? >> >> Bill >> >> Feather River Solar Electric >> Bill Battagin, Owner >> 4291 Nelson St. >> Taylorsville, CA 95983 >> 530.284.7849 >> CA Lic 874049 >> www.frenergy.net >> >> >> -- >> This email has been checked for viruses by Avast antivirus software. >> https://www.avast.com/antivirus >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
