The MC4-Evo 2 isn’t the typical MC4 connector we are used to in the United States, these are commonly found in Europe, designed to meet European standards.
Standard MC4 on the left, EVO-2 on the right pictured below: MC4 and MC4-Evo 2 portfolio first with new IEC certification The MC4 pictured by Jason is not an EVo-2 connector and there for not approved for PVC cable. Bryan Norkunas From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Blake Gleason Sent: Monday, April 26, 2021 9:24 AM To: RE-wrenches Subject: Re: [RE-wrenches] MC4s are listed for THWN, right? Bryan, Thank you for the link. I am confused by the "PVC" section you referenced. Here's the complete text: For safety reasons Stäubli prohibits the use of PVC cables. Cables made from PVC can be connected to MC4-Evo 2 since the insulation material of the connector (Polyamide) is suitable to be connected to PVC. PVC cables usually have an upper limiting temperature of 70 °C, in fixed installations sometimes 80 °C. THHN/THWN-2 is made with PVC insulation, so I assume that it falls under the category of a "PVC cable." So, the first sentence seems to say that it's not allowed by Staubli. But then the second sentence seems to say that is IS allowed. And then the third sentence doesn't seem to be contemplating the most common PVC wire type of all (in the US), which is THHN/THWN-2, which has a 90 degree rating?! Can you help un-confuse me? Thank you! Blake On Mon, Apr 26, 2021 at 8:55 AM Bryan Norkunas <br...@pv-cables.com> wrote: Trying this again since my first link didn’t work, here is the link to the MFG specs for NON PV , low DC applications: https://ec.staubli.com/AcroFiles/Technical%20Info/PV_SOL-LVDC_(en).pdf For safety reasons Stäubli prohibits the use of thermoplastic PVC insulation cables. Bryan Norkunas From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Chris Sparadeo Sent: Friday, April 23, 2021 8:30 AM To: RE-wrenches Subject: Re: [RE-wrenches] MC4s are listed for THWN, right? Also have to appreciate the 8 screws holding that 6x6”. On Fri, Apr 23, 2021 at 12:13 AM Jay <jay.pe...@gmail.com> wrote: Yes they are. Their rating is based on wire size, number of strands, material, insulation thickness. Insulation material isn’t specified. Jay Peltz power. > On Apr 22, 2021, at 7:35 PM, Jason Szumlanski > <ja...@floridasolardesigngroup.com> wrote: > > > I found this gem today while tracking down an AFCI fault. This was one of > three strings connected to a Sunny Boy 9000TL. I was surprised at how rare > and intermittent the AFCI fault was. The THWN pulled out effortlessly. > > I was surprised because usually I spend many hours tracking down AFCI > problems only to find out it's a bad inverter. > > Jason > > > > <20210422_123715-resized-1024.jpg> > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org -- Chris Sparadeo C_802-369-4458 H_802-728-3059 _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org -- Blake Gleason, PE | Employee Owner Director of Innovation and Technical Excellence O: 510-845-2997 x128 C: 510-867-5878 Image removed by sender. 1035 Folger Ave. Berkeley, CA 94710 <http://www.sunlightandpower.com> www.sunlightandpower.com License #326203 <https://bcorporation.net/> Image removed by sender. <https://www.amicussolar.com/> Image removed by sender. <https://calssa.org/> Image removed by sender.
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
