By law, after 1972, it was on the upper starboard side of the transom
when the boat was built. If it is not there now, the boat may have had a
repair that obliterated it. As far as I know, C&C's have the HIN in
additional locations to allow for that. I found my HIN is also molded
into the liner when I lift up the port side settee which has a hinged
lid and storage beneath. This is a spot that is not normally in plain
sight. I think that was intentional.
Bill Bina
On 7/14/2013 6:31 PM, jtsails wrote:
Rick,
To throw some more confusion into the picture, My 1976 38 does not
have any marking on the transom, only the manufacturer plate in the
cockpit, and the serial number does not have any MIC letters, just
numbers. It is stamped with the number "380100-76". All of the
paperwork that I have shows the serial number from the plate, no MIC
letter codes. I don't have the builder's file, but I think I'll call
South Shore and see if I can get it.
James
Delany
1976 38 MkII
Oriental, NC
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
