You are incorrect. You appear to have looked at a bug report that was filed
several years back. Just because it has taken you this long to look at the
bug report does not mean that the OS life cycle was EOL when the report was
filed. This bug report was perfectly valid when it was reported, and the
Thats fine then, but I like and want the message, so how do I make that
message show up again ?
--
grub does not display ESC waiting message to invoke recovery console
https://bugs.launchpad.net/bugs/569820
You received this bug notification because you are a member of Ubuntu
Bugs, which is subsc
No Daniel, I have not as I did not know of this. I will try it now.
Thanks.
I'd like to add that like the post from dasbooter, I re-installed from
scratch just today the final copy of 10.4, I was really hoping that it
might be finally gone, but alas, it is not. I will report back with
results on t
This bug was changed to incomplete status and has not been re-marked
from that, have I not submitted all that you asked for ?
--
extremely bad audio playback on ALL computers since making pulseaudio default
https://bugs.launchpad.net/bugs/569814
You received this bug notification because you are
"Now we need to figure out what *else* is contributing to it."
So you are going to need the three attachments from other computers that
are having the same problems I claim them to have ? That may not happen
over night, I have to make a special call on them, I can make a call in
two days to one, i
Gnome mixer is much better , alsamixergui had no headings over sliders.
If you are confirming that PA is no longer running on my system and
sound quality is now restored, I have no choice but to conclude that PA
was interfering with my audio quality somehowDo you agree now ?
--
extremely bad
"Did you in fact leave the "autospawn = no" bit in
~/.pulse/client.conf?"
YES, exactly as it was left, I did not delete that file or line in the
file.
--
extremely bad audio playback on ALL computers since making pulseaudio default
https://bugs.launchpad.net/bugs/569814
You received this bug not
I have not undone anything, after running the three lines of commands, I
started getting great audio output, I have no system control over volume
of audio other than what is offered from Rhythmbox or VLC media player
and the volume control of the external speaker system. My system is
exactly the wa
"killall pulseaudio"
I can only assume that killall means kill pulseaudio, if not correct me,
I ran your commands exactly as you instructed me to do
--
extremely bad audio playback on ALL computers since making pulseaudio default
https://bugs.launchpad.net/bugs/569814
You received this bug n
No, I did not say that, I said that there is no point in time when PA is
enabled that I get good sound anymore. The only time I have good/great
sound output is when PA is disabled.
I read again what I posted, I never said I could get good sound output
when PulseAudio is enabled. There is only one
here is amixer output after disabling PA. First attachment above this by
me is the amixer output before disabling PA.
** Attachment added: "great_sound.txt"
http://launchpadlibrarian.net/45587328/great_sound.txt
--
extremely bad audio playback on ALL computers since making pulseaudio default
ok, here you go, I have GREAT SOUND AGAIN !!! after following these
commands you linked me to:
echo autospawn = no >> ~/.pulse/client.conf
killall pulseaudio
LANG=C pulseaudio - > ~/pulseverbose.log 2>&1
Great sound output now happens, so test after boot now instead of
undoing the commands.
oh, then its for the "horrible" quality, there is no "awesome" quality
as I do not have a current older version of ubuntu running ATM.
--
extremely bad audio playback on ALL computers since making pulseaudio default
https://bugs.launchpad.net/bugs/569814
You received this bug notification because
I do not understand your question, what do you mean to which scenario ?
This is one of the computers that has all 3 , Stuttering, Pops and
Static when playing any audio file. Is that what you mean scenario ?
--
extremely bad audio playback on ALL computers since making pulseaudio default
https://
"Are you referring to stuttering? Pops? Static?"
all of the above, when a track starts playing, it stutters for a few
seconds ruining the first part of the music, it stutters again on nearly
all tracks later during the playing of the musical piece, pops and
static during the playback of nearly all
here is the output from amixer > sound.txt
** Attachment added: "sound.txt"
http://launchpadlibrarian.net/45515765/sound.txt
--
extremely bad audio playback on ALL computers since making pulseaudio default
https://bugs.launchpad.net/bugs/569814
You received this bug notification because you a
@Dan,
How do you expect me not to be offended by your tone when you tell me "Instead
of bemoaning -- incorrectly, I
might add -- " ?
You missed the boat on this one, what I know is that sound quality is
bad on every single computer I have installed ubuntu on since ubuntu
started using PulseAudi
if you will read again, this happens on all computers I have installed
ubuntu on since pulse audio was made the default. what ever software or
drivers ubuntu installs is causing this problem. I have correctly
described the problem. sound quality is horrendously bad since
pulseaudio is used. I have
Dave,
I truly respect your suggestion, however there was never a complaint with the
old sound engine. I cannot ask people to replace the sound cards in their
computers when ubuntu SHOULD provide as good sound quality as is possible with
the existing hardware. Sound playback is and was very goo
The bug reporting system here has collected info on the specific
computer I used to report this issue, however I'd like to emphasize that
This is an issue on all computers I've installed ubuntu on every since
ubuntu switched to pulse audio as the default sound engine. No matter
weather I play store
Public bug reported:
Binary package hint: grub
There is no press escape message during boot to enter the grub menu to
select the recovery console. Pressing escape does not interrupt the boot
process to allow the recovery console to be selected.
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Packag
** Attachment added: "AlsaDevices.txt"
http://launchpadlibrarian.net/45342978/AlsaDevices.txt
** Attachment added: "ArecordDevices.txt"
http://launchpadlibrarian.net/45342979/ArecordDevices.txt
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/45342980/BootDmesg.txt
**
Public bug reported:
Binary package hint: pulseaudio
Every since Pulseaudio was made default sound engine, sound quality has
been so bad that I pretty much no longer use ubuntu linux to listen to
audio CD's or MP3's. RC 10.4 audio is so bad that no audio is prefered
over the bad audio. with each
PS: I saw nothing wrong with what PeterNZ wrote, He expressed very well
his frustration at the failure of getting a simple task to work, you
really needed to look at the big picture of what he was saying, not the
details of what he said. I still believe I can learn from anyone and
everyone, your re
@Chow Loong Jin
"What we don't like is people who just come in, yell about how it sucks
and all, but not provide specific exam..."
I have no problem with that statement, and actually agree that some end
users could do a better job of expressing themselves. There does seem to
be some presumed righ
"What PeterNZ was talking about seems to be something entirely
different, since"
That is NOT correct ! He is talking about sharing a file ! Its just that
simple ! All he wants to do is share a file. YOU got lost ! Address the
problem, ALL he wants to do is share a file and all you are doing is
tr
"Back on topic, the bug was opened by a user who did not have the
nautilus-share package installed,"
In a default install, a fresh format install with a brand new release,
why did the user not have the tools installed to share a file The
end user was trying to do something simple, why is it t
@Chow Loong Jin
As a senior software architect, I have evidence that I am qualified to
pass judgment on less insightful code-slingers. You missed the whole
point of the post / bug report. The point was that when released, 8.04
did not allow users to share folders or files. Instead what has happene
@Chow Loong Jin
Point and click DID NOT WORK YOU MORON !!! Thats why this bug was
opened, because people could not share folders.
--
"share folder" does not appear
https://bugs.launchpad.net/bugs/215810
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscrib
@Chow Loong Jin
Oh, and one more thing, don't bother responding, as I refuse to engage
in a battle of wits with an unarmed opponent. Remember , its better to
remain silent and thought a fool than to open your mouth and remove all
doubt.
--
"share folder" does not appear
https://bugs.launchpad.ne
@PeterNZ,
You need to run it as sudo to get changes to stick or survive after
reboot. I had exactly the same experience as you did and stumbled on the
solution after much anger and frustration. I am a kindred soul in this
matter. Apparently it is so second nature to this other twit that
responded,
That I can accept and live with but should have been posted for the
benefit for offended receivers of the SPAM. T/Y for the info Ori.
--
[Intrepid] nvidia_drv.so: undefined symbol: AllocateScreenPrivateIndex
https://bugs.launchpad.net/bugs/251107
You received this bug notification because you are
I would also note that by leaving the SPAM in place and not trying to
get it removed is what makes the community look bad, not to mention
saying nothing about the spammer.
--
[Intrepid] nvidia_drv.so: undefined symbol: AllocateScreenPrivateIndex
https://bugs.launchpad.net/bugs/251107
You received
@Jacob
you have a lot of gall telling me that I am not the only decision maker about
who sends me email to my private email account. I did not sign up to report
bugs here only to get harassed and SPAMED by members - this forum is about
posting bug reports, not about giving personal opinions abou
someone please remove this jerks account so that he cannot spam again
!!! what an ass !
--
[Intrepid] nvidia_drv.so: undefined symbol: AllocateScreenPrivateIndex
https://bugs.launchpad.net/bugs/251107
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
I'm not finding that this ppa has fixed the disconnect issues in 8.10. I
just can't get the wireless to stay connected.
--
network-manager issues with system settings AND secrets (Was: doesn't save wep
key on a "system setting" connection)
https://bugs.launchpad.net/bugs/281711
You received this
"In jaunty you have a checkbox" well, that's nice, however this is an
issue with intrepid and this bug was reported for intrepid. Can we
please keep THIS bug post limited to intrepid and open a bug report for
jaunty when it is released ? We are here looking for solutions to a
current release OS bug
I thought this problem was resolved for me by simply doing a fresh
install, however this does not appear to be the case. I found another
bug report that is similar to this bug report and posted to that bug
report:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/281711
I don't do co
I too have this problem, however I am not sure the details are the same.
As stated, when system setting is checked for a wireless connection,
upon reboot the status is reverted to the previous state where its
unchecked. this results in frequent connection/disconnection from the
AP. The symptom ho
*** This bug is a duplicate of bug 156085 ***
https://bugs.launchpad.net/bugs/156085
I for one am getting tired of getting this message, can someone figure
out why this error from virtualbox never get looked at or fixed in
ubuntu ? running virtualbox version 2.10 STILL gets this error( and
sta
no, I don't have your issue. My problem started AFTER there was an
update, I never got it working right after that update. So I decided to
do a fresh new install because it was working before the update, but not
after that update. After the fresh install, the problem has not re-
appeared. It is ho
I'm not experiencing this problem on ANY install or upgrade of intrepid
8.10.
--
compiz fails to start
https://bugs.launchpad.net/bugs/222002
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.
this is a duplicate of bug #114079 . I have been waiting for the fix for
this for over a year now.
https://bugs.launchpad.net/ubuntu/+source/gstreamer0.10-pitfdll/+bug/114079
--
amd64 version of gstreamer0.10-pitfdll?
https://bugs.launchpad.net/bugs/172258
You received this bug notification beca
Public bug reported:
Binary package hint: network-manager
I'm getting frequent wireless disconnects in 8.10 running prism54pci
drivers when other wireless clients are not losing connections. I have
adjusted the beacon interval and DTIM values in the router with no
success. I have seen others with
these two work:
cat /proc/driver/nvidia/registry
or
cat /proc/driver/nvidia/version
you should get what you need there:
[EMAIL PROTECTED]:~$ glxgears
2088 frames in 5.0 seconds = 417.542 FPS
2207 frames in 5.0 seconds = 441.245 FPS
2226 frames in 5.0 seconds = 444.931 FPS
2132 frames in 5.0 se
@dgjones
wow ! those commands no longer work, and I have no clue what new commands
provide the info that we need. sorry, maybe someone else knows the new commands
?
--
[Intrepid] nvidia_drv.so: undefined symbol: AllocateScreenPrivateIndex
https://bugs.launchpad.net/bugs/251107
You received this
@dgjones
For reference I have your same exact GPU, I get 440+ FPS while compiz is
running with an 850mhz CPU. I do nothing special in setup and as I
recall, SBA and FW's are not supported on that card, so there's no
tweaking.
code:
cat /proc/driver/nvidia/agp/status
or
cat /proc/driver/nvidia/
I read something above about this being fixed..humm, nope its not
fixed on kernel 2.6.27
--
Keyboard keys get stuck and repeat (Feisty, Gutsy)
https://bugs.launchpad.net/bugs/124406
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I am having this problem on every computer I have installed 8.10 on. I
have some computers connected to a KVM, but others ARE NOT. my laptop IS
NOT connected to a KVM and the same problem exist. This problem existed
in 7.04 and was finally corrected in 7.10 and 8.04, but now its back. it
does not m
Ii should clarify my point, in the past the 96.x drivers would not
install or enable on my GeForce2 Go laptop, so I was forced to use the
71.x drivers. This time however the 96.xx drivers installed without
complaint - even if it was directly from the Nvidia web site using the
Nvidia installer. So,
JUST an FYI to Alberto and anyone with an older NV11 or so GPU, I
installed the Nvidia driver that was posted in this thread late last
week(96.x), directly from the nvidia web site per the instructions that
were posted here. then Alberto strongly suggested that we wait for the
ubuntu deb package, b
and no one even bothered to read my comments about this bug
--
Keyboard stops responding in X
https://bugs.launchpad.net/bugs/195805
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubun
actually I posted at the same time as the post with instructions above,
new drivers are installed and working just fine for a Geforce2 Go. One
little issue, compiz will not enable ( desktop effects ) but I believe
that the compiz test says the old card just does not meet minimal
requirements (32mb
guess I'll have to wait for Alberto too, no clue how to grab it and get
it installed/working. However I did not see anything posted about which
legacy cards were supported. I have a notebook with a Geforce2 Go and
had to use the 71.xx legacy driver in hardy, I see nothing about this
new driver sup
and Alberto, you do an awesome job ! there was no dissatisfaction with
your work regarding this, it was the absence of statements about this
problem and concerns about how to know if we should upgrade or not if we
have a working accelerated driver in hardy.
This is really frustrating as the new 8.
just to be clear, several people here said just be patient and wait, it
will be fixed and old drivers updated by Nvidiamy point was that
several distros have been waiting already for months for this bug fix
for the old drivers and they are still waiting. Telling people to be
patient implies th
I did lots of searching on the net regarding this problem, what I found
is that 2.6.27 has been out there for months and this OLD driver has
been known for a good long while. several distros have been "waiting"
for months for this updated old drivers release. Alberto makes it seem
like it just arou
nearly two months later and testing ubuntu 8.10 RC this new version of
RSS-GLX 0.8.2 is still not showing up in the repos. The RC version of
RSS-GLX is 0.8.1-10ubuntu2. How much longer before this critical fix is
available ?
--
Really Slick Screensavers use 100% CPU
https://bugs.launchpad.net/bug
where is this fix ? I have been waiting for some time now for the 64 bit
fix to this problem and I still do not see a pitfdll for hardy 64bit
anywhere.
** Changed in: gstreamer0.10-pitfdll (Ubuntu)
Status: Fix Released => Incomplete
--
GstFFMpegCsp: subclass did not specify output siz
cancel that, I found a tutorial that was simple and easy to follow. I
now have vmware-server 1.0.7 installed and functioning on 8.0.4
--
No vmnet module for -386er Kernel
https://bugs.launchpad.net/bugs/185415
You received this bug notification because you are a member of Ubuntu
Bugs, which is su
chris,
I think I do not know enough about linux..the script above produces errors
when I run it, it can't find vmware-server-kernel-modules or
build-essentials... however I believe build-essentials is already installed,
there are other errors as follows :
[EMAIL PROTECTED]:~$ sudo bash
[EM
I just want to remind the devs that this bug showed up for the first
time when compiz was added to ubuntu. this bug did not exist prior to
the effects addition leading one to believe that the OGL rendering seems
to be getting in the way of saving the preferences.
--
synaptic manager preferences n
I'm not entirely sure what the fix was that was released. however I have
insured that I have ALL updates and my problem showed up again a month
after this fix was released and bug report was closed.
** Changed in: ubuntu
Assignee: (unassigned) => firefeather (firefeather)
Status: Fix R
I'm having a keyboard problem on a dell latitude C800 laptop. I get dead
keys. they seem to "go dead" when the laptop lid is shut while the
system is up and running as best I can tell. I had assumed that the
notebook keyboard needed to be replaced because sometimes they dead keys
come back to life
lol, ok guys, I'll be patientdo you think it will be ready in the
next hour or so ? *grin* ( thanks for letting me know.)
--
Really Slick Screensavers use 100% CPU
https://bugs.launchpad.net/bugs/129142
You received this bug notification because you are a member of Ubuntu
Bugs, which is subsc
ok, here we go again, I think I know what it is. but more importantly I
know that its not an installable update. why can't we get fixes for bug
in .deb packages guys ? common, I'm not a developer, I'm a user and I
use hardy right now, its beyond me how a fix for a problem this big is
only being tal
everyone seems to know what to do with this attachment, however I only
know about .deb packages, someone kindly help out the clueless ?
--
Really Slick Screensavers use 100% CPU
https://bugs.launchpad.net/bugs/129142
You received this bug notification because you are a member of Ubuntu
Bugs, whic
I'm sorry, I don't see how this is a work around... I still do not see
any vmware packages in the repros. how does this work around add them to
the package manager so that they can be installed ? I thought the
sources.list was responsible for adding new repros to synaptic ?
--
No vmnet module for
where is vmware for hardy ? I learned that the any-any update was
causing ubuntu some issues for support, but now vmware server 1.0.6 is
out and the any-any update is no longer needed to install. when can we
expect to see vmware return to the repo ? we need some kind of comment
from the devs or fro
with the new vmware server version 1.0.6, the any-any update is no
longer needed, so when will we see vmware returned to the repros ? I
have searched and searched and find nothing about when we can expect
anything at all in the partners repro. Can we get some kind of comment
from ubuntu or a dev th
I cannot determine which column is the CPU usage in the new batch
command. I have output, but don't see anything that resembles a % of
100. below are the results of the sort after running, it does not look
like the batch ends itself, I had to ctrl+c to end the loop.
0 1000 8708 6464 30 10 3
well, I ran the first one...LOL, it ran for 2 hours and I just now
killed the prossesgrrr. you said don't touch the keyboard or mouse
so I followed directions and just let it run. (please don't tell me to
follow you over the cliff - LOL ) no output in the log file, but got all
kind of output fr
ok, here are the values I used in the .desktop files that look like they
produce CPU usage lower than 30%, but again, I was just doing visual
monitoring, not actual CPU values:
gene 6417 68.4 0.3 39424 6492 pts/0 RL 22:31 0:20
/usr/lib/xscreensaver/sundancer2- fixed -n <-
gene 6104 7
ok, I just completed making adjustments to the .desktop files and I seem
to have had success looking at the system resource monitor(the CPU usage
)..grrr, but when I re-run the benchmark test as described in the
wiki link above to compare old results with new results, it looks like
the .desktop
yep !! that works( at least in a windowed setting, the real test is does
it work in native full screen mode ? ), now how do I get that to do the
same thing whenever a random SS starts ? where are these .desktop files
you are referring to ? I will be happy to do some experiments to find a
good balan
below I copy and pasted an email that I received from the author of
these screensavers, it turns out that this is expected behavior. however
he said that there are options to help moderate this issue, but since we
have no configuration dialog in the screensavers dialog, we can not do
anything about
I'd like to take one minute to make sure that I am not giving out the
wrong impression, I'm simply trying to get to the bottom of the 100% CPU
racing condition on screensavers. I'm not knocking any code or anyones
coding skills.
I am not reporting any lock-up issues here, I simply wanted to mentio
here is the web site that the screensavers I am talking about come from:
http://www.reallyslick.com/. these are the very same screensavers that
are offered in the Debian/Ubuntu repro as I run on windows. run these
screensavers in windows and you get the very same CPU racing condition
as you do here
hu, I'm not sure I agree. As I stated above, I have seen this high
CPU racing condition every since I started using Ubuntu 4 years ago. Its
not something new. its there with each and every driver that Nvidia has
released to the linux community. I do not agree that this is a driver
issue as I h
wow, that was a mistake, I just installed the 2 packages mentioned above
and half locked the computer requiring a hard reset. IMO they should be
removed from the repo until they do not present this condition. but
thats just my opinion. this test was preformed on a dual-cpu 2.0 ghtz
(not dual-core)
Thormod,
I really do not believe that I installed the packages you want me to
uninstall.actually, I just did a search in synaptic and see that neither
one of the packages you want me to uninstall are installed. I'm not trying to
contradict you, but there is nothing for me to uninstall at the
*** This bug is a duplicate of bug 174191 ***
https://bugs.launchpad.net/bugs/174191
The bug is that the screensavers use way too many resources and send the
CPU usage to 100%. And if the end user does not monitor his system CPU
then the screensavers prevent copy commands and other such opera
I installed and tested on both 32bit and 64bit, installs just fine, I
did get a warning that the sanity check could not be preformed due to
multiple nvidia.ko's found in the kernel 2.6.24.19(32 bit pc), however
it did not seem to cause problems. ( I thought I had removed previous
kernels completely
I could not figure out how to add my results to that link. I could not
run full screen because the full screen locked up requiring power off,
no keyboard or mouse.
USER PID %CPU %MEMVSZ RSS TTY STAT START TIME COMMAND
-
@Daniel
hummm, ok, so I decided to see if I could survive reboots after the "sudo
insmod /lib/modules/2.6.24-17-generic/misc/vboxdrv.ko" now that I ran "sudo
depmod" manually and it actually does survive reboots nowI booted twice and
virtualbox is working without errors now,,,
@Lucian
ok, so I ran sudo insmod /lib/modules/2.6.24-17-generic/misc/vboxdrv.ko again
to get virtualbox working again then your command :
[EMAIL PROTECTED]:~$ modprobe -r vboxdrv
FATAL: Error removing vboxdrv (/lib/modules/2.6.24-17-generic/misc/vboxdrv.ko):
Operation not permitted
so I guess that I am
@daniel
this is the output of your request:
[EMAIL PROTECTED]:~$ sudo depmod
[sudo] password for gene:
[EMAIL PROTECTED]:~$ modprobe -r vboxdrv
[EMAIL PROTECTED]:~$ modprobe vboxdrv
FATAL: Error inserting vboxdrv
(/lib/modules/2.6.24-17-generic/misc/vboxdrv.ko): Operation not permitted
--
no
after rebooting I get the following error:
VirtualBox kernel driver not installed. The vboxdrv kernel module was either
not loaded or /dev/vboxdrv was not created for some reason. Please install the
virtualbox-ose-modules package for your kernel, e.g.
virtualbox-ose-modules-generic..
VBox statu
ok, IP is now found and package was installed. However not successfully
installed. To get VirtualBox to run, I had to issue the following
command : sudo insmod /lib/modules/2.6.24-17-generic/misc/vboxdrv.ko
that I found in another thread which solved my problem and VirtualBox is
now running on .17
ok, its finally there, however I get the following error when trying to
retrieve from synaptic : W: Failed to fetch
http://us.archive.ubuntu.com/ubuntu/pool/universe/v/virtualbox-ose-modules/virtualbox-ose-modules-generic_24.0.1_amd64.deb
404 Not Found [IP: 91.189.88.46 80]
--
no module built
@Daniel
I just checked to see if the release is available yet and it does not look like
it is. your links show that it was compiled last night or the job ran, I'm not
real sure if it ran clean or not, there was too much for me to understand in
the logs. anyway, I'm not rushing because I took you
I was aware that I was using the proposed.yes, my doing. This
was the first time that it had actually bit me like this, I knew the
risk...lol, I just did not know that my kernel version 17 came from that
repo. it was no big deal for me 'cause I do mainly testing, however I
see now that it w
@Daniel
my tone above did not come out like I had intended, I can't edit, I understand,
I was just hoping for more guidence for future posting, I really did/do think I
was correctly posting for this bug. thanks for the link to the right bug tho :)
--
virtualbox cannot initiate due to vboxdrv mi
most sincere apologies, I had no clue but I do understand. Not to be
making a big issue, but I do not consider a small minor revision change
to be hi-jacking. Its these kinds of comments that turns off new linux
users from reporting bugs. The more correct way of handling minor kernel
change issues
I am writing this 16 hours after the post directly above this post, so
it looks like 16 hours later the 24.0.1 version is still not there ( no
.17 kernel ) is that right ?
--
no module built for 2.6.24-17-generic
https://bugs.launchpad.net/bugs/226753
You received this bug notification because yo
I can confirm this problem still exists in 8.04. I went thru all the
above tests and trials all to no avail. vboxdrv is clearly not getting
installed. With no VMWare available, I decided to try VBOX, my uname -r
is : 2.6.24-17-generic which differs from the above which indicates
kernel 2.6.24-16-ge
can someone get this bug added to ubuntu ?
** Changed in: emerald (Ubuntu)
Status: Incomplete => Confirmed
--
emerald themer doesn't work
https://bugs.launchpad.net/bugs/203791
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
@ Andrew
I had already tried the alt-F2 path, but that did not work, the reason as far
as I can tell, is that it looks like the & was needed at the end of the command
( I have no idea what it is or does ) . if the emerald --replace is issued in a
command window and exit is not then entered after
I can confirm this bug in Final release of Hardy Heron. Emerald does
nothing after installed from synaptic. Issuing the following command:
emerald --replace &
followed by a command "exit" in the terminal window will enable emerald
functionality ONLY until reboot occurs. following the boot, have t
ok, this is the contents of that file:
# Ubuntu specifc compiz-manager configuration file
# goes into /etc/xdg/compiz/compiz-manager
# works with git://anongit.compiz-fusion.org/fusion/misc/compiz-manager
COMPIZ_BIN_PATH="/usr/bin/"
PLUGIN_PATH="/usr/lib/compiz/"
COMPIZ_NAME="compiz.real"
plea
1 - 100 of 174 matches
Mail list logo
