On Wednesday 26 April 2017 02:40 AM, Tom Rini wrote:
> On Mon, Apr 24, 2017 at 10:23:17AM -0500, Andrew F. Davis wrote:
>> On 04/22/2017 01:50 AM, Lokesh Vutla wrote:
>>> No reason to use a separate load script for am33xx than using
>>> omap-common load script.
>>>
>>> Signed-off-by: Lokesh Vutla
QSPI-boot is verified on LS2088ARDB RevF board
with LS2088A SoC.
LS2088ARDB RevF Board has limitation that QIXIS
can not be access, so QIXIS flag is kept disabled
Signed-off-by: Priyanka Jain
Signed-off-by: Suresh Gupta
---
Changes for v5: Renamed defconfig to ls2088ardb_qspi_defconfig
and inc
Update QIXIS related code to be executed
only if CONFIG_FSL_QIXIS flag is enabled
As per board documentation, default sysclk is 100MHz.
In case QIXIS code is not enabled,
update default sysclk value to 100MHz
Signed-off-by: Priyanka Jain
---
Changes for v4:
Added changes for default sys
Update Keystone2 secure device configs under
"TI SYSTEM SECURITY". Without this buildman keeps complaining
about the status of these boards.
Signed-off-by: Lokesh Vutla
---
MAINTAINERS | 3 +++
1 file changed, 3 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index eadb21fb39..0962b47bf9 1
Hi Bin,
On 26.04.2017 06:21, Bin Meng wrote:
On Tue, Apr 25, 2017 at 7:11 PM, Stefan Roese wrote:
Hi Bin,
On 25.04.2017 11:34, Bin Meng wrote:
What do you mean by "display
stays in power safe mode"? Is it a black screen, or is it just
U-Boot's video output screen?
Blank screen and the m
Add an implementation of the ds1307 driver that uses the driver model
i2c APIs.
Signed-off-by: Chris Packham
---
Changes in v2: None
drivers/rtc/Kconfig | 7 ++
drivers/rtc/ds1307.c | 196 ++-
2 files changed, 184 insertions(+), 19 deletions(
> -Original Message-
> From: Priyanka Jain
> Sent: Tuesday, April 25, 2017 9:36 PM
> To: york sun ; u-boot@lists.denx.de
> Cc: Suresh Gupta
> Subject: RE: [PATCH 2/2][v4] nxp/ls2080ardb: Add QSPI-boot support
>
>
>
> > -Original Message-
> > From: York Sun [mailto:york@nxp.c
On Monday 17 April 2017 06:39 PM, Adam Ford wrote:
> This patch changes the way DM_MMC calculates offset to the base register of
> MMC. Previously this was through an #ifdef but that wasn't necessary for
> OMAP3.
>
> This patch will now add in the offset to the base address based on the
> .comp
> -Original Message-
> From: York Sun [mailto:york@nxp.com]
> Sent: Tuesday, April 25, 2017 9:34 PM
> To: Priyanka Jain ; u-boot@lists.denx.de
> Cc: Suresh Gupta
> Subject: Re: [PATCH 2/2][v4] nxp/ls2080ardb: Add QSPI-boot support
>
> On 04/25/2017 03:18 AM, Priyanka Jain wrote:
> >
Hi Adam,
On Wednesday 26 April 2017 05:35 AM, Adam Ford wrote:
> On Tue, Apr 25, 2017 at 4:10 PM, Tom Rini wrote:
>> On Sat, Apr 22, 2017 at 12:20:46PM +0530, Lokesh Vutla wrote:
>>> Signed-off-by: Lokesh Vutla
>>> ---
>>> board/ti/am335x/board.c | 32
>>> 1 fil
Hi Stefan,
On Tue, Apr 25, 2017 at 7:11 PM, Stefan Roese wrote:
> Hi Bin,
>
> On 25.04.2017 11:34, Bin Meng wrote:
>
>
>
What do you mean by "display
stays in power safe mode"? Is it a black screen, or is it just
U-Boot's video output screen?
>>>
>>> Blank screen and the monitor d
On Tuesday 25 April 2017 11:34 PM, Tom Rini wrote:
> On Tue, Apr 25, 2017 at 10:22:27AM +0530, Lokesh Vutla wrote:
>> In file ext4fs.c funtion ext4fs_read_file() compares an
>> unsigned expression with < 0 like below
>>
>> lbaint_t blknr;
>> blknr = read_allocated_block(&(node->inode),
Commit 3f66149 dropped fdt_fixup_ethernet() from common/image-fdt.c,
presuming this function is called by ft_cpu_setup(). Add such call
in the mentioned function for Freescale ARMv8 Layerscape SoCs.
Signed-off-by: York Sun
---
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 1 +
1 file changed, 1 ins
In the programmable clock mode, the SDCLK frequency is incorrectly
assigned when the maximum clock has been assigned during probe,
this causes the SDHCI not work well.
In the programmable clock mode, when calculating the SDCLK Frequency
Select, when the maximum clock has been assigned, it is the a
Differentiate the generic clock source selection value from the parent
clock index to fix the incorrect assignment of the generic clock
source selection.
Signed-off-by: Wenyou Yang
---
drivers/clk/at91/clk-generated.c | 16 +---
1 file changed, 9 insertions(+), 7 deletions(-)
diff
2017-03-27 11:27 GMT+09:00 Simon Glass :
> On 15 March 2017 at 22:11, James Balean wrote:
>> Enables custom DTS files, or those not associated with a specific target, to
>> be compiled into a boot image.
>>
>> Signed-off-by: James Balean
>> Cc: Andy Shevchenko
>> Cc: Simon Glass
>> ---
>> Chan
On Tue, Apr 25, 2017 at 3:10 PM, Tom Rini wrote:
> On Mon, Apr 24, 2017 at 01:34:43PM -0500, Adam Ford wrote:
>
>> With the addition of twl4030_power_off(), let's allow the 'poweroff' command
>> to run this function when CONFIG_CMD_POWEROFF is enabled.
>>
>> Tested on a DM3730 with twl4030 PMIC.
>
Now that the Makefile can call a generator script to build a more
advanced FIT image, let's use this feature to address the needs of
Allwinner boards with 64-bit SoCs (A64 and H5).
The (DTB stripped) U-Boot binary and the ATF are static, but we allow
an arbitrary number of supported device trees to
With the DRAM init code and the SPL's ability to load the ATF binary as
well, we can now officially get rid of the boot0 boot method, which
involed a closed-source proprietary blob to be used.
Rework the Pine64 README file to document how to build the firmware.
Also since these instructions now cov
Now that we can store a DT name in the SPL header, use this string (if
available) when finding the right DT blob to load for U-Boot proper.
This allows a generic U-Boot (proper) image to be combined with a bunch
of supported DTs, with just the SPL (possibly only that string) to be
different.
Eventu
The sunxi SPL was holding the detected RAM size in some local variable
only, so it wasn't accessible for other functions.
Store the value in gd->ram_size instead, so it can be used later on.
Signed-off-by: Andre Przywara
Reviewed-by: Simon Glass
Acked-by: Maxime Ripard
---
board/sunxi/board.c
When a board uses a FIT image to load U-Boot proper, it requires a list
of supported device trees to be supplied in CONFIG_OF_LIST, from which it
chooses the right one at runtime.
For boards with just one possible DT (like the OrangePi PC2) this
defaults to CONFIG_DEFAULT_DEVICE_TREE, but for the P
The SPL stack is usually located at the end of SRAM A1, where it grows
towards the end of the SPL.
For the really big AArch64 binaries the stack overwrites code pretty
soon, so move the SPL stack to the end of SRAM A2, which is unused at this
time.
Signed-off-by: Andre Przywara
Reviewed-by: Simon
From: Siarhei Siamashka
This patch updates the mksunxiboot tool to optionally add
the default device tree name string to the SPL header. This
information can be used by the firmware upgrade tools to
protect users from harming themselves by trying to upgrade
to an incompatible bootloader.
The pri
The Allwinner SoCs with 64-bit cores use an ARM Trusted Firmware binary,
which needs to be loaded alongside U-Boot proper.
Set the respective Kconfig options to let them select this feature and
also automatically build the FIT image.
Signed-off-by: Andre Przywara
Acked-by: Maxime Ripard
---
Kco
Some platforms require more complex U-Boot images than we can easily
generate via the mkimage command line, for instance to load additional
image files.
Introduce a CONFIG_SPL_FIT_SOURCE and CONFIG_SPL_FIT_GENERATOR symbol,
which can either hold an .its source file describing the image layout,
or,
After speaking to Hans at FOSDEM, he is fine with transferring the
maintainership of the Pine64 boards over to me.
Signed-off-by: Andre Przywara
---
board/sunxi/MAINTAINERS | 6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
SPL_FIT obviously requires libfdt in SPL, so let Kconfig express that by
selecting SPL_OF_LIBFDT.
Also make the actual options that users want (SPL signature and SPL FIT
loading) visible in the menu and let them select the SPL_FIT as a
requirement.
Also remove the now redundant SPL_OF_LIBFDT from t
For a board or platform to support FIT loading in the SPL, it has to
provide a board_fit_config_name_match() routine, which helps to select
one of possibly multiple DTBs contained in a FIT image.
Provide a simple function which chooses the DT name U-Boot was
configured with.
If the DT name is one o
The generic ARMv8 assembly code contains routines for setting up
a CCN interconnect, though the Freescale SoCs are the only user.
Link this code only for Freescale targets, this saves some precious
bytes in the chronically tight SPL.
Signed-off-by: Andre Przywara
---
arch/arm/lib/Makefile | 2 +-
At the moment we ignore any errors due to missing FIT properties,
instead go ahead and calculate our addresses with the -1 return value.
Fix this and bail out if any of the mandatory properties are missing.
Signed-off-by: Andre Przywara
Reviewed-by: Simon Glass
---
common/spl/spl_fit.c | 15 +++
mksunxiboot limits the size of the resulting SPL binaries to pretty
conservative values to cover all SoCs and all boot media (NAND).
It turns out that we have limit checks in place in the build process,
so mksunxiboot can be relaxed and allow packaging binaries up to the
actual 32KB the mask boot R
Not every SoC needs to set up the GIC interrupt controller, so link
think code only when the respective config option is set.
This shaves off some bytes from the SPL code size.
Signed-off-by: Andre Przywara
Reviewed-by: Simon Glass
---
arch/arm/lib/Makefile | 2 ++
1 file changed, 2 insertions(
So far we were not using the FIT image format to its full potential:
The SPL FIT loader was just loading the first image from the /images
node plus one of the listed DTBs.
Now with the refactored loader code it's easy to load an arbitrary
number of images in addition to the two mentioned above.
As
Currently the SPL FIT loader always looks only for the first image in
the /images node a FIT tree, which it loads and later executes.
Generalize this by looking for a "firmware" property in the matched
configuration subnode, or, if that does not exist, for the first string
in the "loadables" prope
At the moment we load two images from a FIT image: the actual U-Boot
image and the .dtb file. Both times we have very similar code, that deals
with alignment requirements the media we load from imposes upon us.
Factor out this code into a new function, which we just call twice.
Signed-off-by: Andr
Another round of smaller fixes for the SPL FIT loading series and the
respective patches to enable this feature on 64-bit Allwinner SoCs.
The README has been changed to address all 64-bit Allwinner boards and
has consequently been renamed to README.sunxi64. Also we can now point
U-Boot to the ARM T
Currently the SPL FIT loader uses the spl_fit_select_fdt() function to
find the offset to the right DTB within the FIT image.
For this it iterates over all subnodes of the /configuration node in
the FIT tree and compares all "description" strings therein using a
board specific matching function.
If
On Tue, Apr 25, 2017 at 4:10 PM, Tom Rini wrote:
> On Sat, Apr 22, 2017 at 12:20:46PM +0530, Lokesh Vutla wrote:
>> Signed-off-by: Lokesh Vutla
>> ---
>> board/ti/am335x/board.c | 32
>> 1 file changed, 32 insertions(+)
>>
>> diff --git a/board/ti/am335x/board.c
Hi Simon,
Request your inputs on below query -
Boards I work on have most of the devices on PCI bus, driver model
support enabled, would like to use CONFIG_SYS_EARLY_PCI_INIT to call
pci_init but the below snippet would hinder.
#ifdef CONFIG_PCI
static int initr_pci(void)
{
-#ifndef CONFIG_DM
Hi Simon,
> On 25 Apr 2017, at 22:31, Simon Glass wrote:
>
> Hi Tom,
>
> On 25 April 2017 at 11:12, Tom Rini wrote:
>>
>> On Sat, Apr 22, 2017 at 05:53:36PM -0600, Simon Glass wrote:
>>> +Tom
>>>
>>> On 19 April 2017 at 07:24, Philipp Tomsich
>>> wrote:
This change encodes the CC
hello, from the hush cli im trying to update the uboot within the uboot.
but after erasing a flash sector (which is succeded) i get: "syntax error"
for every coomand.. im not sure why, uboot supposed to run from ram at
this point so why does it matter i erased the flash?
__
Hello,
the Turris Omnia router uses btrfs as the main filesystem, from which
it also loads kernel and dts. We have an implementation in our internal
u-boot
(https://gitlab.labs.nic.cz/turris/turris-omnia-uboot/tree/master/fs/btrfs).
As I understand it, this code was already proposed for u-boot:
h
Signed-off-by: Amrita Kumari
---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 1 +
board/freescale/ls1088a/ls1088a.c | 4
configs/ls1088aqds_qspi_defconfig | 1 +
configs/ls1088ardb_qspi_defconfig | 1 +
4 files changed, 7 insertions(+)
diff --git a/arch/arm/cpu/armv8
Hello,
I have few questions about upstreaming support for the Turris Omnia
into u-boot.
The Turris Omnia has (on I2C interface) an Atmel ATSHA204
CryptoAuthentication chip for storage of MAC adresses, device serial
number, device configuration (1 GB RAM vs 2 GB RAM). This data is
stored in the int
LS1012A has S25FS512S flash of 64M size
Signed-off-by: Suresh Gupta
---
include/configs/ls1012a_common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 0db926f..861cbc3 100644
--- a/include/configs/ls1
As per data sheet, S25FS512S support Uniform sector option
or erase size of 256 kbytes and Page Programming buffer of
256 or 512 Bytes. So, flag SECT_4K have no significance
for this flash.
Signed-off-by: Suresh Gupta
---
drivers/mtd/spi/spi_flash_ids.c | 2 +-
1 file changed, 1 insertion(+), 1
+ Torsten
-Original Message-
From: Adam Shobash
Sent: Tuesday, April 25, 2017 10:26 AM
To: Rene Straub; Stefan Eichenberger
Cc: Assaf Hoffman; s...@denx.de; u-boot@lists.denx.de
Subject: RE: [EXT] Armada 385: PEX detection pulse width
Hi Rene,
These bits that I have sent changes the pul
ls1012ardb, ls1046ardb, ls2080ardb has S25FS512S
flash which do not support Bank Address Register commands
Signed-off-by: Suresh Gupta
---
include/configs/ls1012a_common.h | 1 -
include/configs/ls1046ardb.h | 1 -
include/configs/ls2080ardb.h | 1 -
3 files changed, 3 deletions(-)
diff
Hi Rene,
These bits that I have sent changes the pulse width of the "detection pulse"
during the detect state, and purpose of it is to measure the slew rate of the
common mode voltage change and according to the slew rate it is decided whether
there is a Termination(usually it is the Rx impedan
Hello Adam,
first of all thanks the quick reply. First trials with reduced pulse length,
showed promising results. To better understand the root cause of the problem,
it would be helpful if you explained us briefly what the register change
actually performs. I/we understand that the problem is
On Sat, Apr 22, 2017 at 12:20:48PM +0530, Lokesh Vutla wrote:
> am335x_evm SPL is very close to its limit in SRAM space.
> Switch to use tiny printf to reclaim some size.
>
> Signed-off-by: Lokesh Vutla
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
_
On Sat, Apr 22, 2017 at 12:20:46PM +0530, Lokesh Vutla wrote:
> Signed-off-by: Lokesh Vutla
> ---
> board/ti/am335x/board.c | 32
> 1 file changed, 32 insertions(+)
>
> diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
> index 3e842d3187..566183e669
On Sat, Apr 22, 2017 at 12:20:47PM +0530, Lokesh Vutla wrote:
> Enable SPL_DM on all AM335x based TI platforms.
>
> Signed-off-by: Lokesh Vutla
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Bo
On Mon, Apr 24, 2017 at 10:23:17AM -0500, Andrew F. Davis wrote:
> On 04/22/2017 01:50 AM, Lokesh Vutla wrote:
> > No reason to use a separate load script for am33xx than using
> > omap-common load script.
> >
> > Signed-off-by: Lokesh Vutla
> > ---
> > include/configs/am335x_evm.h | 2 +-
> > 1
On Sat, Apr 22, 2017 at 12:20:44PM +0530, Lokesh Vutla wrote:
> For platforms that don't use device tree in SPL the only
> way to mark this driver as 'required by relocation' is
> with the DM_FLAG_PRE_RELOC flag. Add this to ensure that
> the driver is bound.
>
> Signed-off-by: Lokesh Vutla
Rev
On Sat, Apr 22, 2017 at 12:20:43PM +0530, Lokesh Vutla wrote:
> This is to aid platforms that uses OF_PLATDATA.
>
> Signed-off-by: Lokesh Vutla
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Bo
Hi Simon,
> -Original Message-
> From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass
> Sent: Monday, April 24, 2017 11:38 AM
> To: Peng Fan
> Cc: U-Boot Mailing List ; Tom Rini
> ; Eddie Cai ; Jagan Teki
> ; york sun ; Robert P. J. Day
> ; Michal Simek
> Subject: Re:
Hi Maxime,
Dne torek, 25. april 2017 ob 10:57:05 CEST je Maxime Ripard napisal(a):
> On Mon, Apr 24, 2017 at 11:54:22PM +0200, Jernej Škrabec wrote:
> > Hi Maxime,
> >
> > Dne ponedeljek, 24. april 2017 ob 09:19:40 CEST je Maxime Ripard
napisal(a):
> > > Hi Jernej,
> > >
> > > On Fri, Apr 21, 2
Hi Tom,
On 25 April 2017 at 11:12, Tom Rini wrote:
>
> On Sat, Apr 22, 2017 at 05:53:36PM -0600, Simon Glass wrote:
> > +Tom
> >
> > On 19 April 2017 at 07:24, Philipp Tomsich
> > wrote:
> > >
> > > This change encodes the CC list to UTF-8 to avoid failures on
> > > maintainer-addresses that inc
On Tue, Apr 25, 2017 at 01:10:11PM +0900, Masahiro Yamada wrote:
> In Linux, CONFIG_ARCH_OMAP2PLUS is used for OMAP2 or later SoCs.
> Rename CONFIG_ARCH_OMAP2 to CONFIG_ARCH_OMAP2PLUS to follow this
> naming.
>
> Move the OMAP2+ board/SoC choice down to mach-omap2/Kconfig to slim
> down the arch/
On Fri, Apr 21, 2017 at 10:01:28AM -0500, Andrew F. Davis wrote:
> Almost all TI defconfigs enable this already, add this as a default
> and remove the explicit assignment.
>
> Signed-off-by: Andrew F. Davis
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
On Tue, Apr 25, 2017 at 12:51:10PM +0200, Marek Vasut wrote:
> The following changes since commit 3c476d841daa491f87c8f07851038afbdf4d90a8:
>
> Merge git://git.denx.de/u-boot-fsl-qoriq (2017-04-18 11:36:06 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-usb.g
On Mon, Apr 24, 2017 at 01:34:43PM -0500, Adam Ford wrote:
> With the addition of twl4030_power_off(), let's allow the 'poweroff' command
> to run this function when CONFIG_CMD_POWEROFF is enabled.
>
> Tested on a DM3730 with twl4030 PMIC.
>
> Signed-off-by: Adam Ford
>
> diff --git a/drivers/
On Tue, Apr 25, 2017 at 12:49:41PM +0200, Marek Vasut wrote:
> This was rotting in for too long, might as well push it upstream ...
>
> The following changes since commit 3c476d841daa491f87c8f07851038afbdf4d90a8:
>
> Merge git://git.denx.de/u-boot-fsl-qoriq (2017-04-18 11:36:06 -0400)
>
> are
On 04/25/2017 03:09 AM, Tom Rini wrote:
> On Sun, Apr 23, 2017 at 11:18:04AM +0300, Uri Mashiach wrote:
>> Hello Tom,
>>
>> A gentle ping on this patch series.
>>
>> On 02/23/2017 03:39 PM, Uri Mashiach wrote:
>>> Various USB related comits for the CL-SOM-AM57x module.
>>>
>>> ---
>>> V1 -> V2: Rep
Hi Jagan,
On Tue, Apr 25, 2017 at 3:35 PM, Jagan Teki wrote:
>
>> This isn't a limitation, all the defconfigs on various boards follows
>> the same but except by giving dtb explicitly doing make, like
>> make DEVICE_TREE=imx6l-sabresd
>
> Any help?
Take imx6 cubox or imx6 wandboard as reference.
Hi Tom,
Please take this PR, probably the last PR for the release.
thanks!
Jagan.
The following changes since commit f6c1df44b815a08585e7fd3805a1db51a5955d09:
Prepare v2017.05-rc2 (2017-04-17 18:16:49 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
On Mon, Apr 17, 2017 at 6:58 PM, Jagan Teki wrote:
> On Mon, Apr 10, 2017 at 4:43 AM, Fabio Estevam wrote:
>> On Sun, Apr 9, 2017 at 4:12 PM, Jagan Teki wrote:
>>
>>> Bcz we need to define dtb through CONFIG_DEFAULT_DEVICE_TREE
>>
>> Having 3 defconfigs for SPL is not good. Looks like a step in
Hi Stefano,
On Mon, Apr 17, 2017 at 9:18 PM, Jagan Teki wrote:
> On Wed, Apr 12, 2017 at 9:27 PM, Stefano Babic wrote:
>> On 07/04/2017 19:50, Jagan Teki wrote:
>>> Hi Stefano,
>>>
>>> On Mon, Mar 27, 2017 at 11:32 PM, Jagan Teki wrote:
From: Jagan Teki
Add runtime, modeboot env
On Tue, Apr 25, 2017 at 10:22:27AM +0530, Lokesh Vutla wrote:
> In file ext4fs.c funtion ext4fs_read_file() compares an
> unsigned expression with < 0 like below
>
> lbaint_t blknr;
> blknr = read_allocated_block(&(node->inode), i);
> if (blknr < 0)
> return -1;
>
On Sun, Apr 23, 2017 at 09:38:58PM -0600, Simon Glass wrote:
> +Tom
>
> Hi Chris,
>
> On 21 April 2017 at 10:27, Chris Packham wrote:
> >
> > The first patch is the addition of a KConfig option for the date
> > command. I haven't updated any boards to use the new option due to the
> > sheer numb
On Sat, Apr 22, 2017 at 05:53:36PM -0600, Simon Glass wrote:
> +Tom
>
> On 19 April 2017 at 07:24, Philipp Tomsich
> wrote:
> >
> > This change encodes the CC list to UTF-8 to avoid failures on
> > maintainer-addresses that include non-ASCII characters (observed on
> > Debian 7.11 with Python 2.7
2017-04-25 17:48 GMT+02:00 Álvaro Fernández Rojas :
> I've just realized I sent this without v2 prefix.
> Should I resend it?
no, I've found the right patches in patchwork ;)
>
> El 24/04/2017 a las 19:03, Álvaro Fernández Rojas escribió:
>> All MIPS boards that support debug uart are calling deb
On 04/25/2017 03:18 AM, Priyanka Jain wrote:
QSPI-boot is verified on LS20080ARDB RevF board
Typo here. It is LS2080ARDB.
with LS2088A SoC.
LS2088ARDB RevF Board has limitation that QIXIS
Is the board marked as LS2088ARDB? Is the limitation on rev F board, or
the boot method?
can not be
I've just realized I sent this without v2 prefix.
Should I resend it?
El 24/04/2017 a las 19:03, Álvaro Fernández Rojas escribió:
> All MIPS boards that support debug uart are calling debug_uart_init right at
> the beginning of board_early_init_f.
> Instead of doing that, let's provide a generic c
Tom,
The following changes since commit 3c476d841daa491f87c8f07851038afbdf4d90a8:
Merge git://git.denx.de/u-boot-fsl-qoriq (2017-04-18 11:36:06 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to fedebf0d08a7aa152f8f27de1d40
This allows using PCIe NIC without enabling DPAA FMan.
Signed-off-by: York Sun
CC: Mingkai Hu
---
board/freescale/ls1043ardb/Makefile | 2 +-
include/configs/ls1043ardb.h| 13 -
2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/board/freescale/ls1043ardb/Makefi
This allows using PCIe NIC without enabling DPAA FMan.
Signed-off-by: York Sun
CC: Mingkai Hu
---
board/freescale/ls1046ardb/Makefile | 2 +-
include/configs/ls1046ardb.h| 15 +--
2 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/board/freescale/ls1046ardb/Mak
On Fri, Apr 21, 2017 at 05:02:14PM +0200, Daniel Schwierzeck wrote:
> Hi Tom,
>
> please pull two bugfixes for qemu_mips, thanks.
>
>
> The following changes since commit f6c1df44b815a08585e7fd3805a1db51a5955d09:
>
> Prepare v2017.05-rc2 (2017-04-17 18:16:49 -0400)
>
> are available in the
On Sat, Apr 22, 2017 at 02:08:53AM +0900, Masahiro Yamada wrote:
> Hi Tom,
>
> Here is a small pull request for UniPhier SoCs.
> Please pull!
>
> - Add USB PHY settings
> - Use PSCI system reset when used with ARM Trusted Firmware
> - Improve boot log to show SCP status
> - Sync DT with Linux
>
On Tue, Apr 25, 2017 at 05:59:43PM +0800, Chen-Yu Tsai wrote:
> On Tue, Apr 25, 2017 at 4:46 PM, Chen-Yu Tsai wrote:
> > Hi,
> >
> > On Tue, Apr 25, 2017 at 1:56 PM, Jagan Teki
> > wrote:
> >> Hi,
> >>
> >> We're unable to build with buildman with gcc-4.9.x
> >>
> >>arm: + Bananapi_M2
Hi Bin,
On 25.04.2017 11:34, Bin Meng wrote:
>>> What do you mean by "display
>>> stays in power safe mode"? Is it a black screen, or is it just
>>> U-Boot's video output screen?
>>
>> Blank screen and the monitor does not wake up from power-safe
>> mode. I see the log on the serial console, si
On 04/25/2017 08:44 PM, Ley Foon Tan wrote:
> This is the 7th version of patchset to adds support for Intel Arria 10 SoC.
> This is initial patchset enables the basic support for Arria 10 and other
> features will come after this.
>
> This series is rebased on top of
> http://git.denx.de/?p=u-boo
Add support for the Arria10 SoCDK.
Signed-off-by: Tien Fong Chee
Signed-off-by: Ley Foon Tan
---
board/altera/arria10-socdk/Kconfig | 18 ++
board/altera/arria10-socdk/Makefile | 7 +++
board/altera/arria10-socdk/socfpga.c | 7 +++
3 files changed, 32 insertions(+)
Update Kconfig and Makefile to enable Arria 10.
Clean up Makefile and sorting *.o alphanumerically.
Signed-off-by: Tien Fong Chee
Signed-off-by: Ley Foon Tan
---
arch/arm/mach-socfpga/Kconfig | 10 +
arch/arm/mach-socfpga/Makefile | 46 ++
2 file
Add config and defconfig for the Arria10 and update socfpga_common.h.
Signed-off-by: Tien Fong Chee
Signed-off-by: Ley Foon Tan
---
configs/socfpga_arria10_defconfig | 29 +++
include/configs/socfpga_arria10_socdk.h | 66 +
include/configs/socfp
Device tree files for Arria 10
Signed-off-by: Tien Fong Chee
Signed-off-by: Ley Foon Tan
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/socfpga_arria10.dtsi | 869 +
arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 38 +
..
The following changes since commit 3c476d841daa491f87c8f07851038afbdf4d90a8:
Merge git://git.denx.de/u-boot-fsl-qoriq (2017-04-18 11:36:06 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-usb.git master
for you to fetch changes up to 83cb46c286beb5406aaed2e0d589571971
This was rotting in for too long, might as well push it upstream ...
The following changes since commit 3c476d841daa491f87c8f07851038afbdf4d90a8:
Merge git://git.denx.de/u-boot-fsl-qoriq (2017-04-18 11:36:06 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-socfpga.git
Add pinmux support for Arria 10.
Signed-off-by: Tien Fong Chee
Signed-off-by: Ley Foon Tan
---
arch/arm/mach-socfpga/Makefile | 1 +
arch/arm/mach-socfpga/include/mach/pinmux.h | 17 +
arch/arm/mach-socfpga/pinmux_arria10.c | 96 +
3 files chan
Add misc support for Arria 10.
Signed-off-by: Tien Fong Chee
Signed-off-by: Ley Foon Tan
---
arch/arm/mach-socfpga/Makefile| 1 +
arch/arm/mach-socfpga/include/mach/misc.h | 6 +
arch/arm/mach-socfpga/misc_arria10.c | 259 ++
3 files changed, 266
Restructure system manager in the preparation to support A10.
No functional change.
Change uint32_t to u32.
Signed-off-by: Ley Foon Tan
---
arch/arm/mach-socfpga/Makefile | 5 +-
.../arm/mach-socfpga/include/mach/system_manager.h | 128 ++---
.../{system_ma
Add SPL support for Arria 10.
Signed-off-by: Tien Fong Chee
Signed-off-by: Ley Foon Tan
---
arch/arm/mach-socfpga/spl.c | 53 +++--
1 file changed, 51 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-socfpga/spl.c
in
Add system manager register struct and macros for Arria 10.
Signed-off-by: Tien Fong Chee
Signed-off-by: Ley Foon Tan
---
.../arm/mach-socfpga/include/mach/system_manager.h | 74 +---
.../include/mach/system_manager_arria10.h | 81 ++
2 files changed
Add sdram header file for Arria 10.
Signed-off-by: Tien Fong Chee
Signed-off-by: Ley Foon Tan
---
arch/arm/mach-socfpga/include/mach/sdram_arria10.h | 380 +
1 file changed, 380 insertions(+)
create mode 100644 arch/arm/mach-socfpga/include/mach/sdram_arria10.h
diff --git
Add i2c, timer and other A10 macros.
Signed-off-by: Ley Foon Tan
---
arch/arm/mach-socfpga/include/mach/base_addr_a10.h | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
b/arch/arm/mach-socfpga/include/mach/base_addr_a1
Add clock driver support for Arria 10.
Signed-off-by: Tien Fong Chee
Signed-off-by: Ley Foon Tan
---
arch/arm/mach-socfpga/Makefile |3 +-
arch/arm/mach-socfpga/clock_manager.c | 10 +
arch/arm/mach-socfpga/clock_manager_arria10.c | 1096 +
Add reset driver support for Arria 10.
Signed-off-by: Tien Fong Chee
Signed-off-by: Ley Foon Tan
---
arch/arm/mach-socfpga/Makefile | 2 +
arch/arm/mach-socfpga/include/mach/reset_manager.h | 2 +
.../include/mach/reset_manager_arria10.h | 147
arch/ar
Restructure misc driver in the preparation to support A10.
Move the Gen5 specific code to gen5 file.
Change all uint32_t_to u32.
Signed-off-by: Ley Foon Tan
---
arch/arm/mach-socfpga/Makefile| 2 +-
arch/arm/mach-socfpga/include/mach/misc.h | 25 ++
arch/arm/mach-socfpga/
1 - 100 of 125 matches
Mail list logo
