> -----Original Message----- > From: Priyanka Jain > Sent: Tuesday, April 25, 2017 9:36 PM > To: york sun <york....@nxp.com>; u-boot@lists.denx.de > Cc: Suresh Gupta <suresh.gu...@nxp.com> > Subject: RE: [PATCH 2/2][v4] nxp/ls2080ardb: Add QSPI-boot support > > > > > -----Original Message----- > > From: York Sun [mailto:york....@nxp.com] > > Sent: Tuesday, April 25, 2017 9:34 PM > > To: Priyanka Jain <priyanka.j...@nxp.com>; u-boot@lists.denx.de > > Cc: Suresh Gupta <suresh.gu...@nxp.com> > > Subject: Re: [PATCH 2/2][v4] nxp/ls2080ardb: Add QSPI-boot support > > > > On 04/25/2017 03:18 AM, Priyanka Jain wrote: > > > QSPI-boot is verified on LS20080ARDB RevF board > > > > Typo here. It is LS2080ARDB. > > > > > with LS2088A SoC. > > > LS2088ARDB RevF Board has limitation that QIXIS > > > > Is the board marked as LS2088ARDB? Is the limitation on rev F board, or the > > boot method? > > > Board is marked as LS2088ARDB. > Shall I change defconfig name to ls2088ardb_qspi_defconfig? > Also for NOR boot on LS2088ARDB, currently we are using > ls2080ardb_defconfig. > Shall I create a copy of ls2080ardb_defconfig as l2088ardb_defconfi or make > no change for that?
Do not duplicate defconfig, it will increase the test time. If you believe LS2088ARDB is the only board using QSPI, you can use ls2088ardb_qspi_defconfig. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
