This allows using PCIe NIC without enabling DPAA FMan. Signed-off-by: York Sun <york....@nxp.com> CC: Mingkai Hu <mingkai...@nxp.com> --- board/freescale/ls1043ardb/Makefile | 2 +- include/configs/ls1043ardb.h | 13 ++++++++----- 2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/board/freescale/ls1043ardb/Makefile b/board/freescale/ls1043ardb/Makefile index 2a4452e..930c690 100644 --- a/board/freescale/ls1043ardb/Makefile +++ b/board/freescale/ls1043ardb/Makefile @@ -7,6 +7,6 @@ obj-y += ddr.o obj-y += ls1043ardb.o ifndef CONFIG_SPL_BUILD -obj-$(CONFIG_SYS_DPAA_FMAN) += eth.o +obj-$(CONFIG_NET) += eth.o obj-y += cpld.o endif diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 5e570cd..5e5d1f6 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -250,16 +250,19 @@ /* FMan */ #ifndef SPL_NO_FMAN -#ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_FMAN_ENET +#define AQR105_IRQ_MASK 0x40000000 + +#ifdef CONFIG_NET #define CONFIG_PHYLIB -#define CONFIG_PHYLIB_10G #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ - #define CONFIG_PHY_VITESSE #define CONFIG_PHY_REALTEK +#endif + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G #define CONFIG_PHY_AQUANTIA -#define AQR105_IRQ_MASK 0x40000000 #define RGMII_PHY1_ADDR 0x1 #define RGMII_PHY2_ADDR 0x2 -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
