This allows using PCIe NIC without enabling DPAA FMan. Signed-off-by: York Sun <york....@nxp.com> CC: Mingkai Hu <mingkai...@nxp.com> --- board/freescale/ls1046ardb/Makefile | 2 +- include/configs/ls1046ardb.h | 15 +++++++++------ 2 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/board/freescale/ls1046ardb/Makefile b/board/freescale/ls1046ardb/Makefile index b92ed0b..4076558 100644 --- a/board/freescale/ls1046ardb/Makefile +++ b/board/freescale/ls1046ardb/Makefile @@ -7,6 +7,6 @@ obj-y += ddr.o obj-y += ls1046ardb.o ifndef CONFIG_SPL_BUILD -obj-$(CONFIG_SYS_DPAA_FMAN) += eth.o +obj-$(CONFIG_NET) += eth.o obj-y += cpld.o endif diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 67ee626..40a5635 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -178,18 +178,20 @@ #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ #endif +#define AQR105_IRQ_MASK 0x80000000 /* FMan */ #ifndef SPL_NO_FMAN -#ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_FMAN_ENET + +#ifdef CONFIG_NET #define CONFIG_PHYLIB -#define CONFIG_PHYLIB_10G #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ - #define CONFIG_PHY_REALTEK -#define CONFIG_PHY_AQUANTIA -#define AQR105_IRQ_MASK 0x80000000 +#endif +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHY_AQUANTIA +#define CONFIG_PHYLIB_10G #define RGMII_PHY1_ADDR 0x1 #define RGMII_PHY2_ADDR 0x2 @@ -200,6 +202,7 @@ #define CONFIG_ETHPRIME "FM1@DTSEC3" #endif + #endif /* QSPI device */ -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
