I've just realized I sent this without v2 prefix. Should I resend it?
El 24/04/2017 a las 19:03, Álvaro Fernández Rojas escribió: > All MIPS boards that support debug uart are calling debug_uart_init right at > the beginning of board_early_init_f. > Instead of doing that, let's provide a generic call to debug_uart_init right > before the call to board_init_f if debug uart is enabled. > > v2: Introduce the changes suggested by Daniel Schwierzeck: > - Call debug_uart_init before low level init for boards with stack in SRAM. > > Daniel Schwierzeck (1): > MIPS: call debug_uart_init right before board_init_f > > Álvaro Fernández Rojas (3): > MIPS: QCA AP121: remove debug_uart_init call > MIPS: QCA AP143: remove debug_uart_init call > MIPS: tl-wdr4300: remove debug_uart_init call > > arch/mips/cpu/start.S | 14 ++++++++++++++ > board/qca/ap121/ap121.c | 3 --- > board/qca/ap143/ap143.c | 3 --- > board/tplink/wdr4300/wdr4300.c | 18 ++++++++++++++---- > 4 files changed, 28 insertions(+), 10 deletions(-) > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot