this also
> be a problem of the scanner?
>
> I have already lost one of my computers to this problem and I am not
> too eager in loosing others.
>
> Thanks,
> Mohit
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
That's unusual. I would not recommend to use SCSI IDs 0 and 7 at all.
But if this is the only way for you, who knows why ?
--Peter
Ulrich Deiters schrieb:
> My HP 6200C is only recognized properly on the SCSI bus if its
> SCSI address is 0.
>
> Regards,
>
> Ulrich Deit
and maybe also some
error messages which may tell you what's going wrong. You also can look
at /var/log/messages if the USB-layer is creating some error messages.
I hope it helps
--Peter
Mohit Kumar schrieb:
> Peter,
>
> Its USB.
>
> Thanks,
> Mohit
>
> On 5/27/
> however status_loc is not SANE_STATUS_GOOD.
>
> Can any one tell me what is the problem here?
Maybe the value of status_loc tells what was wrong: unsupported,
invalid, io-error, permission denied.
Before changing the depth you may need to change the scan mode to Color.
--Peter
>
> Thanks,
> Mohit
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
rt)
>
> versions of sane
> sane-backends-1.0.7-6.1.i386.rpm
> sane-backends-devel-1.0.7-6.i386.rpm
> sane-frontends-1.0.7-6.1.i386.rpm
>
> Regards
> Phil Workman
>
> p...@pwork.contact.net.nz
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
.
>
> My scanner is hooked up and ran under windows that last time I booted into
> Windows.
>
> Help,
>
> Scott
>
> p.s. I am running xsane 0.89.
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http:
read or an error occurs. If an error
has occured and data has been received, the error is ignored and the
data is processed.
Please give the backend a try and report problems back.
--Peter
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
re to go with this. I don't know myself what the
> communication "should" look like.
>
> I'd be happy to post my debug output though it's rather lengthy. I
> figured it'd be better to send it off list to anyone who could make
> sense of it.
>
>
> Thanks for any help anyone can give
>
> Cheers,
> Keith
>
>
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
t anything or dig into things a bit deeper
> for you if needed.
>
> Cheers,
> Keith
>
>
>
> On Sat, 2002-12-07 at 11:34, Peter Kirchgessner wrote:
>
>>Hi Keith,
>>
>>gzip it and send it to me.
>>
>>--Peter
>>
>>Keith Clayton sc
;
> Looking forward to hear from you soon!
>
> Best regards Raffaele
>
>
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
laims that I'm not missing something obvious! I just don't
> get it. For what it's worth, I know the unit works because it runs
> under Windoze 2K.
>
> Thanks in advance.
>
> Reid Vail
>
> ___
> Sane-devel mail
; really slow - but core dumped too with the same message.
> Then the device does not appear any longer:
> /dev/usb/scanner0 does not exist ?? connect/disconnect changes nothing ??
> I have to reboot my Linux to get back the device !!
>
> What's wrong ? Do I have
thread.h
>>
>>line 108
>>
>>static int ...
>> has to be changed to
>>static void ...
>
>
> No, why do you think so?
>
>
>>2.
>>
>>sane-backends\backend/hp-handle.c
>
>
> Should be fixed (AFAIK will be fixed) by Pe
Bakan schrieb:
> Hi,
>
> On Wed, 22 Oct 2003 22:25:23 +0200, Peter Kirchgessner wrote:
>
>
>>hp-backend has now been changed in CVS to use new
>>sanei_thread-interface. Franz, could you please test it on OS/2 ?
>
>
> Now it compiles again without errors, thank
_
> sane-devel mailing list
> sane-devel@lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
(Bulk) MxPS= 16 Ivl=0ms
> E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms
>
> The scanner is a ScanJet4100C.
>
> Where am I going wrong? Is this a problem with the scanimage?
>
> Regards,
>
> Lee
>
>
>
>
> ____
times it sometimes will make the scanner
>> work. Like one in 20 tries.
>>
>>
>> --
>> Bill Moseley
>> moseley at hank.org
>>
>>
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:peter at kirchgessner.net
anJet 4100C flatbed scanner
>>
>> moseley at bumby2:~$ scanimage >image.pnm
>> scanimage: no SANE devices found
>>
>>
>> Hum -- if I try multiple times it sometimes will make the scanner
>> work. Like one in 20 tries.
>>
>>
>> --
>> Bill Moseley
>> moseley at hank.org
>>
>>
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:peter at kirchgessner.net
..
>>>> Sorry if I was not clear. I was trying w/o the hub. Here'
>>>> with the scanner connected directly to the computer:
>>>>
>>>> moseley at bumby2:~$ scanimage -L
>>>> device `hp:libusb:005:002' is a Hewlett-Packard ScanJet 41
1PM +0100, Peter Kirchgessner wrote:
>> export SANE_HP_RDREDO=20
>> xsane hp
>>
>> This will do 20 retries (2 seconds in total) before giving up. Please
>> try if at least the xsane-GUI comes up. Maybe you then will run into an
>> I/O-error during scanning.
>
&g
Hello,
I just changed to openSUSE Leap 42.2, where my Canon CanoScan 9000F
stopped working properly. scanimage scanned one page. Then stopped
working when starting to scan the next page. Scanner needed to be
switched off and on for the next scan.
Leap 42.2 comes with sane-backends V 1.0.24. Af
E-backends ?
Kind regards
Peter Kirchgessner
m. allan noah schrieb:
> i can confirm that this does help problems i have seen with the 6200C.
> now the device is very consistent- it shows up and works the first,
> third, fifth, etc times that i use it. but every 'even' call to X
unction returns, instead of continuing on to look at
> subsequent devices. instead, the fclose and return should be replaced
> with a warning:
>
> {
> DBG(1,"sanei_scsi_find_devices: bad attach\n");
> }
>
> this fixes the problem for me.
>
> allan
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:peter at kirchgessner.net
he idea that there's a chance the scanner could have a
> problem
> but it sure seems to work great in every other way I can find.
>
> thanks in advance.
>
> Mare
>
>
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
_
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
e identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
>
> And now ? ...
>
>
>
>
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
ies of the scanner, resulting in very loud grinding noises.
>
> Is this a known problem with the backend?
>
> thanks,
> jason pepas
> ja...@pepas.com
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.c
sted Completed
> ID Attempted Attempted Attempted
> == = = ====== = == = =
>3 0 0 00 0 00 0 0
>
> External Host Adapter Resets: 0
> Host Adapter Internal Errors: 0
>
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
0,
2.4.12 and 2.4.13).
Does anybody know if the problem has been fixed ? And if so, at which
kernel ? The ChangeLogs don't tell me much.
--Peter
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
SANE was used.
Currently the only advice I can give is trying to use a different SCSI card.
--Peter
Douglas Gilbert wrote:
> Peter Kirchgessner wrote:
>
>> Hello,
>>
>> some time ago problems have been reported with some 2.4.x kernels and
>> SCSI-devices. What
0c patch listed 1.0.5 in the filename, so I don't know if I even
> needed to apply the patch.
>
> Thanks in advance for your time.
>
> Peace
>
> Tom
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/sg/6... failed to open (Invalid argument)
> sane-find-scanner: searching for USB scanners:
> sane-find-scanner: done
>
> should it not look in /dev/scsi as well on Solaris?
>
> Thanks
>
>
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
rted Astra 610P has been tagged as :unsupported
>>
>
> Ok.
>
> Bye,
> Henning
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
an be pretty sure that the problem is on the server.
>
> Bye,
> Henning
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
he Debian
> version of the SANE HP backend (sane-backends 1.0.7). Maybe it's
> interesting for you:
>
> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=154827&repeatmerged=yes
> and
> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=154828&repeatmerged=yes
manpages).
>
> What am I doing wrong?
>
> Thanks,
> Stan
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
The sane configuration file /etc/sane.d/ho.conf is as follows:
> scsi HP
> /dev/scannet
>
> I would appreciate any advice you people may be able to offer.
>
> Thanks
> Frank
>
> Thanks
>
>
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
least dll.conf too. And check that
it has the line with hp activated.
--Peter
> 4 as root did chmood 666 /dev/sg0
>
>>From this I would be happy to report glad tidings but alas this is not so.
> I received exactly the same results - no change.
>
> Thanks
> Frank
>
&g
hange.
>
> Thanks
> Frank
>
> On Monday 05 August 2002 01:14, Peter Kirchgessner wrote:
>
>>Don't remove the files. You need at least dll.conf too. And check that
>>it has the line with hp activated.
>>
>>--Peter
>>
>>Frank Roberts
time the client asks for the password. So the server istn's running
> anymore when I have to enter the password.
>
>
>>Please send the output when scanimage --help is called.
>>
>
> You can find the complete output of scanimage --help in sanedebug3.txt.gz.
> Again without the password-question that I was unable to pipe. The
> question for an username is included.
>
> Bye,
> Konstantin
>
> ---
>
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
d with pure RH 7.3 straight out of the box.
>
> Thanks
> Frank
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
97_codec: AC97 Audio codec, id: 0x4943:0x4511 (ICE1232)
> via82cxxx: board #1 at 0xCC00, IRQ 11
> via_audio: ignoring drain playback error -11
> via_audio: ignoring drain playback error -11
> via_audio: ignoring drain playback error -11
> CSLIP: code copyright 1989 Re
Hi,
I added a similar handling to the hp-backend in CVS. Now these
USB-devices should work correctly even if option connect-device is not
specified.
--Peter
Henning Meier-Geinitz wrote:
> Hi,
>
> On Tue, Jul 30, 2002 at 07:59:05PM +0200, Peter Kirchgessner wrote:
>
>>T
_type'
> hp.c:637: structure has no member named `got_connect_type'
>
>
> Frank.
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
Hi,
seems that the response from the scanner was not correctly passed back.
Please have a look at http://www.kirchgessner.net/pub/sane/53c416.txt
and check if you have configured your card in a similar way.
--Peter
Johan van den Berg wrote:
> Hi,
>
> I'm geeting the following error message w
mp has died, can someone please confirm
> (if you know that this is what the error means) so that I don't waste money
> on a new lamp if this is not the case.
>
> Yours,
> Simon Wood.
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
n),
> and it updates hp.desc and sane-hp.man accordingly.
>
> I didn't actually change any code in the "hp" backend, because the
> affected code is wrapped with "#ifdef HAVE_PTAL". I'll let Peter
> Kirchgessner decide what to do about it, but it wouldn
___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
gt; Regards
> Arvind
>
>
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
r is
> connected to USB port.
The hints on the page about SCSI won't help you. But the hints about USB
could be interesting for you. Also the link to the home of the USB
scanner driver.
Sincerely
Peter
> Regards
> Arvind
>
> "Peter Kirchgessner"
.*f0S
> [sanei_scsi] sanei_scsi_cmd: Writing srb.u.cmd.data_len= 5
> [hp] sanei_hp_get_connect: Could not get info for b1t5l0. Assume SCSI
> Assertion failed: info, file hp-scl.c, line 1317
>
> Abnormal program termination
> ...
>
> Any hint what to do?
> Complete errorlog available on request.
>
> Regards,
> Franz
>
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
be supported.
Sincerely
Peter Kirchgessner
mem...@gmx.net schrieb:
> Hi mailinglist,
>
> I'm using a "HP Scanjet 3570c". It is connected with usb.
> I use it at a Suse 8.1 Linux 2.4.18 .
> My current sane version is "sane 1.0.7-59".
> According th
Peter
Franz Bakan schrieb:
> On Wed, 06 Nov 2002 07:13:40 +0100, Peter Kirchgessner wrote:
>
>
>>can you try to start it as
>>
>>scanimage -d hp 1>test.pnm 2>errors.255
>
>
> Ich hab's weitergeleitet, die darauffolgende
> errors.255, die m
b1t5l0. Assume SCSI
> Assertion failed: info, file hp-scl.c, line 1317
>
> Abnormal program termination
> ...
>
> Any hint what to do?
> Complete errorlog available on request.
>
> Regards,
> Franz
>
>
> ___
s).
> [hp] sane_exit called
> [hp] sane_exit will finish
>
>
> at this point I can't resolve the problem. Has anybody idea about?
> just for info: I've also tried the newer backend, similar results. the
> scsi-card works with an external cd-writer unit.
>
>
> Thanks in advance, regards
>
>
>
> -- tef
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
Hi,
could be a similar problem. But this time the SCSI interface is a
Initio-9100uw on FreeBSD 4.6.2.
--Peter
abel deuring schrieb:
> Peter Kirchgessner wrote:
>
>> Hi,
>>
>> seems to be a SCSI problem. Opening the SCSI-device is ok. Writing
>> seems also to
rning: pointer targets in assignment differ in signedness
> 2warning: passing arg [foo] of `[bar]' from incompatible
> pointer type
> 2 warning: missing initializer
> 2warning: [foo] format, [bar] arg (arg [baz])
> 1warning: too many arguments for format
> 1warning: suggest explicit braces to avoid ambiguous `else'
> 1warning: operation on `p' may be undefined
> 1warning: assignment from incompatible pointer type
>
> Bye,
> Henning
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
hp.conf has the device
/dev/usb/scanner0 activated. To work over libusb, kernel scanner driver
must be unloaded (rmmod scanner).
--Peter
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
3500c if
> that could be a hint (?)
>
> Thanks.
> FD
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
P SIGNATURE-
> Version: GnuPG v1.0.7 (GNU/Linux)
>
> iD8DBQE+1XkCn/usgigAaLcRAtC7AJ9ktJhMNnJD8eyNlZd6cZMXVJHnrQCfXK8P
> QaL8GIAGP8E25WgsmW4y1Aw=
> =C6k4
> -END PGP SIGNATURE-
>
> _______
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
; Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
t; I also tried the RPMs on RH8.0
> the libraries were added to /etc/ld.so.conf
> ldconfig was run
>
> Any idea what the next item of destruction is?
>
> Thanks,
>
> Dave
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
support for my scanner when I next
> compile 2.4.20. What do I need to include, are there any patches that I need
> to apply? Help
>
> Scott
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.most
de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
u have loaded a SCSI driver for your SCSI adapter.
>
> found USB scanner (vendor=0x03f0, product=0x0101) at /dev/usb/scanner0
> found USB scanner (vendor=0x03f0, product=0x0101) at libusb:003:003
>
>
> $ scanimage -L
> device `hp:/dev/usb/scanner0' is a Hewlett-Packard MODELx flatbed scanner
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
Hi,
seems really to be a problem with the USB-connection. At that point I
can't help further.
Sincerely
Peter
Bill Moseley schrieb:
> On Thu, 2 Jan 2003, Peter Kirchgessner wrote:
>
>
>>Hi,
>>
>>your configuration is ok. Otherwise scanimage would not find th
it the kernel? or the SANE version? xsane-0.90.
>>
>>Moritz,
>>
>>your problem "sounds" like a sanei_scsi or kernel problem.
>>
>>could you run
>>
>>export SANE_DEBUG_SANEI_SCSI=255
>>export SANE_DEBUG_HP=255
>>xsane 2>
ot;Indicates that the
> removable medium may have been changed or the target has been reset."
>
> So nothing really serious, but I do not have the docs for HP scanners
> available...
>
> Abel
>
> _______
> Sane-devel m
ist
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
Hi,
Henning Meier-Geinitz schrieb:
> Hi,
>
> On Sun, Jan 05, 2003 at 11:11:47AM +0100, Peter Kirchgessner wrote:
>
>>HP is just for the manufacturer. Because on the listing nearly noone
>>else uses the manufacturer name in the models list, I would agree to
> There is also a scanner named "HP 3200C" supported by the umax_pp
> backend. I guess that one should be also named "ScanJet 3200C"?
> So a CC goes to the umax_pp maintainer :-)
>
> bye,
> Henning
> ___
> Sa
Affordable. Sign up now.
> http://mailplus.yahoo.com
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
ive my primitive knowledge of Linux,
> does that mean I have to apply the patch to source
> code and build a custom linux image? How hard is it to
> do so?
> Thank you.
>
> Hida
> --- Peter Kirchgessner wrote:
>
>>Hi,
>>
>>you can start at
>>
&g
or > hpscan'
> gives me "scanimage: open of device hp:/dev/sg0
> failed: Invalid argument". Have you seen this kind of
> error before?
> Thanks for your help,
>
> Hida
> --- Peter Kirchgessner wrote:
>
>>Hi Hida,
>>
>>you can try it, but I don
Hi,
due to the commitment of Franz Bakan, the hp-backend V1.02 now has
support for OS/2. hp-backend V1.02 is available in CVS.
--Peter
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
backes.html
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
Hi Joachim,
Joachim Backes schrieb:
> On 19-Feb-2003 Peter Kirchgessner wrote:
>
>> Hi Joachim,
>>
>> thank you for the test file. You are saving the TIFF-files with a
>> JPEG-compression in xsane. At least xpaint is not capable of handling
>>
Rev: 1.0q
> Apr 10 21:28:36 mofo kernel: Type:
> CD-ROM ANSI SCSI revision: 02
> Apr 10 21:28:36 mofo kernel: Attached scsi generic sg3 at scsi1, channel
> 0, id 4, lun 0, type 3
>
>
> Thanks.
>
>
> Karl
> Free Software: "You don't pay back, you pay forward."
> -- Robert A. Heinlein
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
gt; found SCSI processor "HP C2520A 3644" at /dev/sgd
>
> /dev/sg3 has world read/write permissions.
>
please have a look at /etc/sane.d/dll.conf. Make sure that the
hp-backend is not commented out.
Sincerely
Peter
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
;
>
>>valp pointer, which then does:
>> *(SANE_Bool*)valp = val ? SANE_TRUE : SANE_FALSE;
>>Dereference of NULL valp causes a segmentation fault.
>
>
> I guess the same happens without net, but then the pointer may point
> to something useful by luck.
>
> I'll let the hp maintainer find out, the hp backend has to many files
> and levels for me to understand :-)
>
> Bye,
> Henning
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
Selects the scan source (such as a document-feeder).
> [ saned crashes here ]
> --lamp-off []
> Shut off scanner lamp.
> Geometry:
> -l 0..215.788mm (in steps of 1.52588e-05) [0]
> Top-left x position of scan area.
> [ a few more options here ]
>
> Thanks!
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
? SANE_TRUE : SANE_FALSE;
>>Dereference of NULL valp causes a segmentation fault.
>
>
> I guess the same happens without net, but then the pointer may point
> to something useful by luck.
>
> I'll let the hp maintainer find out, the hp backend has to many files
> and levels for me to understand :-)
>
> Bye,
> Henning
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
uld be the same as parm.pixels_per_line or
> parm.pixels_per_line*3, is this correct?
>
> Thanks,
>
> Peter
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
fied Advertising: http://www.sellit2000.com
>
>
> Non-dairy creamer is flammable.
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
27;ll look at the correct target, but it
> still
> didn't work. I've also tried xvscan to no avail and am running out of ideas,
> any
> help would be greatly appreciated.
>
> Thanks,
>
> Tony
>
> ____
;> Find a way to set matrices in the frontend (gtk-table with sliders ?)
>>
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
Hello Michal,
Michal Marus(ka wrote:
> Peter Kirchgessner writes:
>
>
>>Hello Michal,
>>
>>you need to set mode color to use matrix-rgb. It is not available for
>>mode greyscale.
>>
>
> it should be available. Reference manual of HP SCL (v8.0) say
TIA,
>
> Chris
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
3, TIOCSCCINI, 0xbfffb6a4)= -1 ENOTTY (Inappropriate ioctl for
> device)
> ioctl(3, TIOCGKISS, 0x804ede8) = -1 ENOTTY (Inappropriate ioctl for
> device)
> old_mmap(NULL, 135168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
> 0) = 0x4019e000
> rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
> rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
> rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
> write(3, "*\0\0\0)\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 42) = 42
> rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
> select(4, [3], NULL, NULL, NULL)= 1 (in [3])
> rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0
> read(3, "", 41) = 0
> rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
> --- SIGSEGV (Segmentation fault) ---
> +++ killed by SIGSEGV +++
>
> =
>
> Any help appreciated.
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
Hi Ben,
as I remember this has been reported before. But I am not quite sure if
it has been fiexed in the current version of SANE.
--Peter
Ben Finney wrote:
> On Sat, Feb 02, 2002 at 09:18:20AM +0100, Peter Kirchgessner wrote:
>
>>Ben Finney wrote:
>>
>>>I get a s
___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
;>
>>>Frank
>>>
>>>___
>>>Sane-devel mailing list
>>>sane-de...@www.mostang.com
>>>http://www.mostang.com/mailman/listinfo/sane-devel
>>>
>>>
>>>
>>--
>>Peter Kirchgessner
>>http://www.kirchgessner.net
>>mailto:pe...@kirchgessner.net
>>
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
> mode. I'm just wondering if the XPA problem has been addressed in 1.0.7.
>
> No rush, just curious. :-)
>
> Thanks!
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
the color of the background (which
> you don't want) and
>
>
>
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
version can be found in the CVS and at
http://www.kirchgessner.net
--Peter
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
(alternate e-mail: pkirchgess...@t-online.de)
mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
(alternate e-mail: pkirchgess...@t-online.de)
--
>@..@ http://www.TauSq.org/
> ()
> ( >__< )
> ^^ ~~ ^^
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-d
ny one of these to be supported if someone could point me to a good
> possibility!
>
> Tim.
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
(alternate e-mail: pkirchgess...@t-online.de)
ScanJet 6300C.
>
> I love xsane. I just want it to come to life when I fire up the program.
>
> Thanks,
>
> Mark
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
(alternate e-mail: pkirchgess...@t-online.de)
1 - 100 of 150 matches
Mail list logo
