Hi, pleae have a look at /etc/sane.d/hp.conf or /usr/local/etc/sane.d/hp.conf. It must have two lines in it:
/dev/usbscanner option connect-device In dll.conf (same directories) the line with "hp" must be active. You may need to set the permissions: chmod 666 /dev/usbscanner More hints can be found at http://www.kirchgessner.net/sanehpfaq.html Sincerely Peter Reid Vail schrieb: > I've been trying for a least a month to get an HP6350c USB Scanjet to > work. I'm running a SuSE 8.1 Personal distro, which comes with a SANE > implementation of 1.0.8-47. > > I think (but can't say for sure) that some part of the install of the > unit (via YAST) isn't working because it doesn't even "test" correctly. > However YAST does correctly identify it. > > When I run xscanimage I get this output: > > [xscanimage] No scanners were identified. If you were expecting > something different, check that the scanner is plugged in, turned on and > detected by sane-find-scanner (if appropriate). Please read the > documentation which came with this software (README, FAQ, manpages). > > But when I run sane-find-scanner I get this output: > > sane-find-scanner: found USB scanner (vendor = 0x03f0, product = 0x0601) > at device /dev/usb/scanner0 > sane-find-scanner: found USB scanner (vendor = 0x03f0, product = 0x0601) > at device /dev/usbscanner > > I make no claims that I'm not missing something obvious! I just don't > get it. For what it's worth, I know the unit works because it runs > under Windoze 2K. > > Thanks in advance. > > Reid Vail > > _______________________________________________ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel > -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net
