Hi Chris, did you have a look at http://www.kirchgessner.net/sanehpfaq.html ? There are some hints for use of HP-scanners. Unfortunately your Symbios Logic SCSI card seems to be not easy to operate. You can browse through the sane-devel mailing list for additional hints. But several people gave up using this card.
--Peter Chris Montgomery wrote: > Sorry to ask a newbie question, but I need some help getting my scanner > going under Red Hat 7.1. > > I have sane 0.82 and xsane 1.0.3 installed. > I did not config my kernel for > the scanner at the time of install, but I would like to do that now. When > I try to start xsane, I get the error "xsane: no devices available." > > I've been all over the Sane web site, read How-to's on > hardware/scsi/kernel, etc., and ended up with a major headache. I guess I > need help with just the basics, configuring my system to use a SCSI > scanner device. The SCSI card is a Symbios Logic SCSI interface card (chip > set Sym53C400A, card # C2502) for my ScanJet 3C. > > As you can probably tell, I'm new to Linux. Any help would be greatly > appreciated. > > TIA, > > Chris > _______________________________________________ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel > > -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net
