Re: KR> Update Steph and his dad

Larry, The wheel fairings are on. It gaves me 4 kts. See picture. https://www.planespotters.net/photo/988087/ph-tdb-private-rand-robinson-kr2s The > Op 3 oktober 2019 om 1:19 schreef Flesner via KRnet : > > > On 10/2/2019 4:02 PM, Jeff Scott via KRnet wrote: > > Steph, > > > > Speed of the a

Re: KR> Update Steph and his dad

On 10/2/2019 4:02 PM, Jeff Scott via KRnet wrote: Steph, Speed of the aircraft will pick up quickly as you continue working on drag reduction. It makes a big difference on an aircraft this slick. Congratulations! -Jeff Scott

Re: KR> Update Steph and his dad

rnet krnet" > Cc: "Stef den Boer" > Subject: KR> Update Steph and his dad > > Mike you are right, I need to post aan update.😄 > > Here a Report after 12 flight ours. > > After the record building time (started in 1986) we finished our KR2S > listeni

Re: KR> Update Steph and his dad

Bill Jacobs Daytona Beach, Fl. On Wednesday, October 2, 2019, 03:27:32 PM EDT, Stef den Boer via KRnet wrote: Steph,Thanks for the update, it has been awhile. You and your dad have more people following you than you may realize.Blue Sky's,Bill __

Re: KR> Update Steph and his dad

RE: Subject: KR> Update Steph and his dad >Mike you are right, I need to post an update. >Here a Report after 12 flight ours. ___ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet

KR> Update Steph and his dad

Mike you are right, I need to post aan update.😄 Here a Report after 12 flight ours. After the record building time (started in 1986) we finished our KR2S listening to the name PH-TDB. If you Google her callsign you wil find a few pretty Nice pics, but is not a excuses that I did not update my

Re: KR> Update on Wunderbird - brake lines

On 3/6/2019 8:15 AM, Mark Langford via KRnet wrote: I will say that I have something like 4000 landings between my KR2S and KR2, both with Nylaflow lines, and I haven't had a problem. I often do 6-10 touch and goes at a time, but I'm sure they cool off between landings. Mark Langford, Huntsvill

Re: KR> Update on Wunderbird

Yes. Inspection panels are being installed at every critical inspection point. Mark Jones Oldsmar, Fl N771MJ “WunderBird” www.flykr2s.com flyk...@gmail.com > On Mar 6, 2019, at 3:08 PM, Sid Wood via KRnet wrote: > > Mark, > Any plan to put in access panels in the stub wings for annual Cond

Re: KR> Update on Wunderbird

Mark, Any plan to put in access panels in the stub wings for annual Condition Inspections? Looks like moving parts and cables in there. Sid Wood Tri-gear KR-2 N6242 California, MD, USA Hello All, Follow this link and you can see what I h

Re: KR> Update on Wunderbird - brake lines

Most of the heat related failures I’m aware of on plastic brake lines were on Varieze, Longeze types or other types that rely on Brake steering. Usually guys doing high speed taxi tests over and over. In quite a few instances the brake area got hot enough to soften the resin in the bottom of the

Re: KR> Update on Wunderbird - brake lines

Thanks for the observation guys. The tubing I used is from AS&S part number 05-12488. This is NSR tubing rated for 2120 lb burst pressure with a wall thickness of .050 and recommended for use with hydraulic brake lines. It has a minimum bend radius of one inch. It is also rated for flexural fatigue

Re: KR> Update on Wunderbird - brake lines

Larry Flesner wrote: > I saw in one photo where you have "plastic" brake line running from the > gear leg to the caliper.  I've heard of incidents where the brakes get > hot enough, when used for steering, to soften the line and have it blow > out.  You might want to consider a metal loop. Alu

Re: KR> Update on Wunderbird

On 3/5/2019 9:09 AM, mark jones via KRnet wrote: Follow this link and you can see what I have done so far since my last update a few months ago. + Mark, I saw in one photo where you have "plastic" brake line running from the

Re: KR> Update on Wunderbird

Hi Joe. I do not have the information you are seeking. You can contact the following manufacturers for Corvair motor mounts. William Wynne NvAero Azalea Aviation There may also be others producing them. Good luck. Mark Jones Oldsmar, Fl N771MJ “WunderBird” www.flykr2s.com flyk...@gmail.com

Re: KR> Update on Wunderbird

Sweet! Nice work, Mark. Chris K On 3/5/2019 8:09 AM, mark jones via KRnet wrote: Hello All, Follow this link and you can see what I have done so far since my last update a few months ago. Scroll down to the bottom and see the new photos I have posted. http://flykr2s.com/WunderBird.html Mark J

Re: KR> Update on Wunderbird

Great work Mark, I would be interested in the detail of the motor mount if you have them….Plans, drawings including material details…. Tnx and send a fee if required…. Joe Wallace jwallace...@gmail.com > On Mar 5, 2019, at 09:09, mark jones via KRnet wrote: > > Hello All, > Follow this link

Re: KR> Update on Wunderbird

AM To: KRnet Cc: mark jones Subject: KR> Update on Wunderbird Hello All, Follow this link and you can see what I have done so far since my last update a few months ago. Scroll down to the bottom and see the new photos I have posted. http://flykr2s.com/WunderBird.html Mark Jones (N771MJ) Oldsmar,

Re: KR> Update on Wunderbird

KRnet Date: 3/5/19 9:09 AM (GMT-06:00) To: KRnet Cc: mark jones Subject: KR> Update on Wunderbird Hello All,Follow this link and you can see what I have done so far since my lastupdate a few months ago. Scroll down to the bottom and see the new photos Ihave posted.http://fly

Re: KR> Update on Wunderbird

Very nice looking build On Tue, Mar 5, 2019 at 9:06 AM mark jones via KRnet wrote: > Hello All, > Follow this link and you can see what I have done so far since my last > update a few months ago. Scroll down to the bottom and see the new photos I > have posted. > http://flykr2s.com/WunderBird.ht

KR> Update on Wunderbird

Hello All, Follow this link and you can see what I have done so far since my last update a few months ago. Scroll down to the bottom and see the new photos I have posted. http://flykr2s.com/WunderBird.html Mark Jones (N771MJ) Oldsmar, FL flyk...@gmail.com www.flykr2s.com _

Re: KR> Update KR2-egb - rotax 912s ul instasllation

- From: Luis Claudio via KRnet To: Eduardo Barros via KRnet Cc: Luis Claudio Sent: Monday, July 16, 2018 5:57 PM Subject: Re: KR> Update KR2-egb - rotax 912s ul instasllation Felicidades Eduardo on your upgrade. I hope to meet you in person some day. Regards Luis R Clau

Re: KR> Update KR2-egb - rotax 912s ul instasllation

Felicidades Eduardo on your upgrade. I hope to meet you in person some day.  Regards Luis R Claudio, KR2S, Dallas, Texas  On ‎Monday‎, ‎July‎ ‎16‎, ‎2018‎ ‎03‎:‎52‎:‎55‎ ‎PM‎ ‎CDT, Eduardo Barros via KRnet wrote: Friends Today I did update my web with the Rotax 912 installation, you can

KR> Update KR2-egb - rotax 912s ul instasllation

Friends Today I did update my web with the Rotax 912 installation, you can see in the link to end of mesaje. The next monday 23, I will arrive to OSH, about 14:00 Saludos Eduardo Barros San Pedro, Bs. As., Argentina Mail: edua...@kr2-egb.com.ar Visite el proyecto de construcción del avión

Re: KR> Update

Ken, it's .Net not .com.   Paul ViskBelleville Il.618-406-4705 Original message From: Ken Hurley via KRnet Date: 7/8/18 10:41 AM (GMT-06:00) To: KRnet Cc: Ken Hurley Subject: KR> Update Whoever has this web site, can you please update it? Also I can't rem

Re: KR> Update

Thank you Larry. Ken Hurley On Sun, Jul 8, 2018, 10:50 AM Flesner via KRnet wrote: > On 7/8/2018 10:41 AM, Ken Hurley via KRnet wrote: > Whoever has this web site, can you please update it? Also I can't remember > the web address for 2018 listing. > http://krgathering.com/ > Ken Hurley > ++

Re: KR> Update

On 7/8/2018 10:41 AM, Ken Hurley via KRnet wrote: Whoever has this web site, can you please update it? Also I can't remember the web address for 2018 listing. http://krgathering.com/ Ken Hurley I think that Steve at NVaero has that site

KR> Update

Whoever has this web site, can you please update it? Also I can't remember the web address for 2018 listing. http://krgathering.com/ Thanks Ken Hurley kenhurle...@gmail.com ​417-324-2196​ ___ Search the KRnet Archives at https://www.mail-archive.com/

KR> Update on Doug Steen

Mike, our Tailwind has 180 hp. It takes 10 gph to do 200 knots true at cruise altitude. ___ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http:

Re: KR> Update on Doug Steen

: krnet@list.krnet.org KR List New Cc: Doug Steen Subject: KR> Update on Doug Steen Folks, Having missed the last few fly ins, I want to give my friends an update. I retired from Lockheed Martin in Aug, 2016 and became a King Air air ambulance captain for my retirement gig. I earned an A&P

KR> Update on Doug Steen

Folks, Having missed the last few fly ins, I want to give my friends an update. I retired from Lockheed Martin in Aug, 2016 and became a King Air air ambulance captain for my retirement gig. I earned an A&P license to reduce ownership cost of the planes, swapped to a better Wittman Tailwind, N

KR> update re wings

An update... after processing all the info I read on the archives ,it occurred to me that I might be going at the wiggly wings all wrong. I had occasion to be at the hangar for a few minutes today and decided to try the AN6-5A bolts in some of the other WAFs that I have .In some, they were a bit

Re: KR> Update- Any new videos on youtube

Thanks for the picture and agree on the extension of the garage... I need to do this too. My wings are finished and stored. Just finished the elevator and rudder. Will be running the control cables to them this week then I head to the cockpit to finish the rudder pedals and brakes. Getting clos

KR> Update- Any new videos on youtube

 I put both Wings on in the garage for the first time.  Looks like I need a bigger garage.  I wanted to check my wing tips positions in relationship with each other.  Using a water level I determined after leveling the fuselage that they were only 3/16 of an inch off from each other. I think tha

Re: KR> update on missing e-mails

Larry, I use Thunderbird with usfamily.net as my IP. I have no problem with it. I get a notice if the message is suspected to be spam or fishing.  I use the IP for email only. about $23  per year. On 4/14/2018 7:16 PM, Flesner via KRnet wrote: I'm still missing random e-mails from the KRnet

Re: KR> update on missing e-mails

Larry Flesner wrote: > Are others that miss krnet e-mails using Yahoo? The problem is very > intermittent, no rhyme or reason. "Yahoo" explains it. Yahoo is overwhelmingly the common thread among those who have intermittent KRnet email problems. It's been that way for the 20 years I've been

KR> update on missing e-mails

I'm still missing random e-mails from the KRnet.  I use "Thunderbird" e-mail program and my IP is Frontier.com that uses "Yahoo" e-mail.  When I realize I'm missing an e-mail from the net I can go to the Frontier/Yahoo e-mail site and there it is marked "spam".  I highlight the e-mail and ma

Re: KR> KR update

Mike, Congrats on getting the engine back together and all going well again. Having seen pictures of it, you've done a superb job on the engine. Build your confidence in it. I'll come visit for some KR flying in the spring. -Jeff Scott Los Alamos, NM   - Subje

KR> KR update.

At 05:41 PM 6/25/2017, you wrote: . If things finally go right, I should be in the air by Sunday with a safe and dependable new O-200. Mike Sylvester kr2s builder +++ Mike, I can give you a head start on where to look for

Re: KR> KR update.

Hey Mike glad you're feeling somewhat better. Can you take a few photo's and post them? Thanks Ken Hurley kenhurle...@gmail.com 417-343-6888 On Sun, Jun 25, 2017 at 5:41 PM, Mike Sylvester via KRnet < krnet@list.krnet.org> wrote: > As some of you know, I have been in the process of rebui

KR> KR update.

As some of you know, I have been in the process of rebuilding the engine on my KR. After waiting 2 1/2 months on Superior cylinders they told me that it would now be August before they could ship. So I cancelled on the Superiors and called Continental and received new cylinders 3 days later. I t

KR> Update for KR2S build

My plane has new legs. More pictures are available on Facebook Adam Tippin album KR2S build. Project started in oct 2013 Adam Tippin A&P KR2S builder___ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST

KR> update

On our way home with my two projects. A highlight of the trip was that John Shaffer drove to Marion to meet up. I appreciate his insight and comments , lots of good info passed on. We are heading into colder weather so have to watch the roads. I will post some pics when I get home. Bob R

Re: KR> Update Mark Jones

the investment you are making in them will be well worth it. Brian Kraut 904-536-1780 br...@eamanuacturing.com Original Message Subject: KR> Update Mark Jones From: Mark Jones via KRnet Date: Mon, March 06, 2017 7:28 am To: "KR Net" , "CorvairNet" Cc:

Re: KR> Update Mark Jones

Cheer up Mark..My grand kids are older than yours and are now looking after us ! At least you're still flying .. Cheers, Mac On Mon, Mar 6, 2017 at 2:28 PM, Mark Jones via KRnet wrote: > I want to update everyone on what is going on with me and my KR2S. Life’s > changes have caught up to me

KR> Update Mark Jones

I want to update everyone on what is going on with me and my KR2S. Life’s changes have caught up to me and I have had to make some serious changes in my life. We are now living in Florida and the cost of living here is about double what it was in Wisconsin. I was paying $112 for a huge t-hangar

KR> Update, fiberglassing Rt. Wing

EMAIL BOARD Cc: Paul Visk Sent: Sat, Dec 10, 2016 3:05 pm Subject: KR> Update, fiberglassing Rt. Wing Doing the final prep to fiberglass the top of my rt. wing. I made a heat box to cover the entirewing. So the winter isn't going to slow me down. In this pic, I'm checking and sanding w

KR> Update, fiberglassing Rt. Wing

Doing the final prep to fiberglass the top of my rt. wing. ?I made a heat box to cover the entirewing. So the winter isn't going to slow me down.?In this pic, I'm checking and sanding were needed the spars to make sure I don't end up with any infamous KR bumps. Paul Visk?Belleville Il. 618-406-

KR> KR update

With the help of friends, My girl is tucked in to her new home at ASN, Talladega, Al. Also while looking at the Gathering attendee list, I read the name Max Power, Is this the coolest name ever or what ? We need name tags, I've got to meet this guy. Maybe over a root beer. Mike Sylvester kr2s

KR> KR update

20, 2016 at 12:09 PM From:?"Mike Sylvester via KRnet" To:?KRnet Cc:?"Mike Sylvester" Subject:?KR> KR update Ok Guys, I have taken the week off to sand the primer and paint the plane. Let me start by saying that something I thought was a good thing in the past has come ba

KR> KR update

Ok Guys, I have taken the week off to sand the primer and paint the plane. Let me start by saying that something I thought was a good thing in the past has come back to bite me. In the building process as I finished a part of the plane I would prime it by rolling on 2 part epoxy high fill primer

KR> KR update

Mike I have used MEK in the past to smooth out orange peel in the past on small parts. Never on the entire project. It works well and does not effect the strength of any work under it. Rick PS if you do this make sure it is well vented. On Mon, Jun 20, 2016 at 2:09 PM, Mike Sylvester via KRnet < k

KR> Update

I have been very slack over the past 12 months but am slowly getting back into my kr2s. I mounted the engine (overhauled 0200) yesterday so I can start looking at cable lengths and instruments. I hope to get some photos out at some point. The fuse is mostly complete. The wing spars are done. An

KR> update on the Dr. Dean plane

Joe, Really nice workmanship on the new KR, your shop reminds me of mine sans the TV. I have not got my KR-2 out of Phase 1 testing and you are inspiring me to start on another, perhaps a KR-2S this time. Anyone interested in a new, Phase 1 KR-2 with Great Plains 2180 VW and electronic display

KR> update on the Dr. Dean plane

Hey Guys, I have been doing a bit here and there to keep moving on the Dr. Dean custom KR. Today I finished shaping all the fairing foam to the tail group. Took me awhile thinking about it to decide how I wanted it to look. Not exactly how I wanted it to turn out but still will look pretty slick

KR> Update: 28 Days Now Until MMV...

Welcome to Dave Mullins and Allan Fink, the latest 2 pilots to register for the 2015 KR Gathering at McMinnville. http://bouyea.net/KRGathering/index.html You can sign up here http://bouyea.net/KRGathering/web_pages/pre-reg-form2.html or, if you're already registered, double-check your registrat

KR> Update on third class medical certificate reform

KR> Update 1: 2015 KR Gathering @ MMV

Ok, it?s time for an update! Dan Prichard & I met over the weekend and he wants to share some news with everyone. First off; Mark September 3 ? 6, 2015 on your calendar to join us at the 2015 KR Gathering @ MMV. The Gathering web site is here: http://krgathering.com Click the link to jump

KR> update on my project

I joined the Rand Robinson KR-2S Aircraft on face book and up loaded all my photos Randy Moore Newbern TN 731 589 1330 ___Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.To UNsubscribe from KRnet, send a message to KRnet-leave

KR> update on my project

I joined photo bucket and uploaded all my KR photos to it http://s1291.photobucket.com/ -Original Message- From: Randy Moore Newbern Tn. N318RM via KRnet To: krnet Sent: Sun, Nov 9, 2014 3:55 pm Subject: KR> update on my project

KR> update on my project

I hope this works kriiairpane at yahoogroups.com Randy Moore

KR> update on my project

Are not attachments good enough. What is this SIGN IN YAHOO I D STUFF, Virg On 11/9/2014 2:49 PM, Randy Moore Newbern Tn. N318RM via KRnet wrote: > https://groups.yahoo.com/neo/groups/krIIairpane/photos/albums/769411823 > > I have added a new album to this group I put on yahoo

KR> update on my project

https://groups.yahoo.com/neo/groups/krIIairpane/photos/albums/769411823 I have added a new album to this group I put on yahoo Randy Moore Newbern Tn avid mark IV Challenger II KR II converting to single seat crashed Tbird I no1son38 at aol.com 731 589 1330

KR> update on my project

Wouw, looks very nice...almost there. Stef -- Steph and his dad are building the KR-2S see http://www.masttotaalconcept.nl/kr2 >Origineel Bericht >Van : krnet at list.krnet.org >Datum : 09/11/2014 03:22 >Aan : KRnet at list.krnet.org >Onderwerp : KR> update o

KR> update on my project

Looking like a "Grand Champion" in the making. See N64KR at http://KRBuilder.org - Then click on the pics Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best KR at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Interior at 2013 - KR Gathering in

KR> update on my project

Hi Everyone, I added a few pics. to my photo bucket. I've been working real hard trying to get everything finished up in my garage before I take it to my hanger. The cooling system was somewhat of a challenge, but looking back, so has everything else. The pressure cooling system seems to work we

KR> update

Hi everyone, I made my final landing for the day in mid Arknesaw. Still 960 miles from home. The weather was perfect all day, but the wind never did give any help. But not having a head wind at least ground speed and true air speed were the same. If I'm not foggged in in the morning I should be

KR> update

At 08:28 PM 9/7/2014, you wrote: >I made my final landing for the day in mid Arknesaw. Joe, That's just how they talk in that part of the country. You're really in Arkansas. Just wanted to let you know where you dropped in for the night so you can

KR> ./ Update..

First KR to arrive, Jack Daugherty. ! Steve Glover Sent from my iPhone > On Sep 4, 2014, at 14:21, Rob Schmitt via KRnet > wrote: > > Rob Schmitt, Terry Chizek, and Paul Russell have made it to Jeff's. > > My Kr is running fine considering the altitude. > > Rob > > > >> On Sep 4, 2014, a

KR> Update for my KR2$

Here is a rough view of my kr. I started building Nov. 2013. Its slow going but I'm aiming for quality over speed. -- next part -- A non-text attachment was scrubbed... Name: 14036133489070.jpg Type: image/jpeg Size: 37590 bytes Desc: not available URL:

KR> Update

Can anyone give us an update on Jack Cooper. Mark Jones (N886MJ) Stevens Point, WI E-mail: flykr2s at charter.net Web: www.flykr2s.com

KR> Update

The weather is currently beautiful here mount Vernon we have about 10 k r the showed up , several other people that showed up. Doug Steen in his Whitman tail wheel and several other spam cams everything's looking good. Sent from Yahoo! Mail on Android

KR> update

I'm going off net, stop by the bank, and then a one hour drive to Mt.Vernon. Everyone drive and fly safe. If you need to contact me, my cell is 618 201 5958 Larry Flesner

KR> update on i fly 720

hold off for a while. Jack Cooper Chuckey TN. - Original Message - From: rkp...@comcast.net To: "krnet" Sent: Monday, February 20, 2012 4:22:51 PM Subject: KR> update on i fly 720 Hi Everyone, I used my iFlyGPS 720 for the first time,all I can say is WOW! Y

KR> update on i fly 720

Hi Everyone, I used my iFlyGPS 720 for the first time,all I can say is WOW! You can't get a brighter day then were having this morning Nashville, Tn.   direct sunlight is no problem. All of the sectionals,weather and airport info can be downloaded using a wireless connection or a flash drive

KR> Update on Chugging Engine

One thing I haven?t seen mentioned (and is somewhat rare) is a worn cam lobe or a collapsed lifter. Good luck! Bob Johnson Willamina, OR (971) 645-9491 KR2SSW

KR> update on project

t; To: krnet Sent: Fri, June 17, 2011 7:34:31 PM Subject: KR> update on project Hi Everyone, I haven't had much time to update my photobucket. I'm trying to finish my panel I painted it and started to install the instruments for the final time. I took some pictures this after

KR> update on project

Hi Everyone,  I haven't had much time to update my photobucket. I'm trying to finish my panel I painted it and started to install the instruments for the final time. I took some pictures this afternoon and uploaded them. Hope to see you all in Oshkosh next month. Robert Pesak Hermitage,

KR> update

Hello builders, Some of you may have seen my KR-2S blog on the nVaero forum. I have removed it because their forum is not active, and has become full of spam lately. Steve at nVaero is a really nice guy and they have a pretty good company, so, it is nothing personal at all. I just think it's be

KR> Update

Good luck and sympathies for your Disease, I haven't heard of any cure. la...@lebanair.com -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Dan Heath Sent: Monday, July 05, 2010 4:52 PM To: 'KRnet' Subject: KR> Update I

KR> Update

: krnet-bounces+danrh=windstream@mylist.net [mailto:krnet-bounces+danrh=windstream@mylist.net] On Behalf Of Virgil N. Salisbury Sent: Monday, July 05, 2010 10:20 PM To: KRnet Subject: Re: KR> Update Don't forget to do a new W/B before takeoff with the Corvair, Virg

KR> Update from the archives - Polyester fuel tanks

Hi Mike Having just become part of a syndicate of pilot/builders who have purchased a flying Sonex and also being a KR builder, I too have been having a very close look at the way Sonex do a number of things and trying to work out what could easily be transferred/adapted into my build. The fuel h

KR> Update

Don't forget to do a new W/B before takeoff with the Corvair, Virg Dan Heath wrote: > I have been fighting my new brakes, getting them properly "bled". For some > reason, they don't pump up from the bottom like the Rosenhan did. PS: I > have a full set of Rosenhan (Matco) whe

KR> Update from the archives - Polyester fuel tanks

ity. Mike Taglieri miket--...@juno.com - Original Message - From: "Larry Knox" To: "'KRnet'" Sent: Monday, November 30, 2009 12:08 PM Subject: RE: KR> Update from the archives - Polyester fuel tanks Sorry Jeff, not trying to degrade your Knowledge or the owners

KR> Update

I have been fighting my new brakes, getting them properly "bled". For some reason, they don't pump up from the bottom like the Rosenhan did. PS: I have a full set of Rosenhan (Matco) wheels, brakes, axles, and spacers for the Diehl gear, for sale OFF NET. So, knowing that I am going to make th

KR> Update KR2S N1852Z

Rob, Your airplane still looks great, happy it is going again, and I love the landing photo with the cattle in the background but the American Flag photo is really a good one. Thanks for the update Larry Howell From: "robert7...@aol.com" robert7...@aol.com  

KR> Update KR2S N1852Z

Thought I'd send an update on my plane since I've made a few changes lately and had some maintenance done on her as well. I passed the 250 hours mark on N1852Z and she is ready for another trip to Oshkosh and the KR Gathering this year. This spring I installed a Dynon D6 in the cockpit. I hav

KR> update

Assaad Assaker Médecine aéronautique Médecin National de la FFULM +33661848162 - Original Message - From: "MICHAEL SYLVESTER" To: "KRNET" Sent: Wednesday, December 23, 2009 8:11 PM Subject: KR> update Hey Guys, I've mounted the spars, temporarily mounted templates

KR> update

Hey Guys, I've mounted the spars, temporarily mounted templates to mark taper of spars and oh yea, had to remake 2 WAF's to get one of the back spars to drop down 1/2 inch. Boy is this some tedious work. There is a light at the end of the tunnel though. I think that I'm about to be where I can

Subject: Re: KR> Update from the archives - Polyester fuel tanks

Thanks Matt, says it better than I did. la...@lebanair.com -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Matt Lenz Sent: Monday, November 30, 2009 6:25 PM To: kr...@mylist.net Subject: Subject: Re: KR> Update from the archi

KR> Update from the archives - Polyester fuel tanks

AM To: KRnet Subject: Re: KR> Update from the archives - Polyester fuel tanks In the statement below, are you talking about tip tanks? Larry Howell  We are working on a Bonanza that never burned auto fuel at any time, that is leaking in several places becaus

Subject: Re: KR> Update from the archives - Polyester fuel tanks

Jeff, I always look for your comments in this forum.  Keep it up and don't get hung up over the replies that bug you.  As a new builder, (and a mechanical engineer of over 25 years), I learn something new every other day in this forum.  I am grateful to those who have the experience and are willi

KR> Update from the archives - Polyester fuel tanks

He has to be. Bo's have bladder tanks for mains. --- On Mon, 11/30/09, Larry H. wrote: From: Larry H. Subject: Re: KR> Update from the archives - Polyester fuel tanks To: "KRnet" List-Post: krnet@list.krnet.org Date: Monday, November 30, 2009, 11:10 AM In the statem

KR> Update from the archives - Polyester fuel tanks

In the statement below, are you talking about tip tanks? Larry Howell  We are working on a Bonanza that never burned auto fuel at any time, that is leaking in several places because of pin holes and delamination.

KR> Update from the archives - Polyester fuel tanks

Subject: Re: KR> Update from the archives - Polyester fuel tanks This forum never ceases to amaze me. I can observe the damage first hand, interview the owner and report exactly what he has told me knowing that he takes at least ordinary diligence in his fuel testing, do the repairs in my s

KR> Update from the archives - Polyester fuel tanks

From: jscott.pi...@juno.com Jeff Scott Wrote " This forum never ceases to amaze me. "       Hey don't take it personal Jeff, the forum amazes me too, everyone has different experiences and everyone posts their different experiences, as it should be and we who are just building learn from all t

KR> Update from the archives - Polyester fuel tanks

This forum never ceases to amaze me. I can observe the damage first hand, interview the owner and report exactly what he has told me knowing that he takes at least ordinary diligence in his fuel testing, do the repairs in my shop, and post what should be some useful information to the group. Ye

KR> Update from the archives - Polyester fuel tanks

krnet-boun...@mylist.net] On Behalf Of rdrace...@aol.com Sent: Wednesday, November 25, 2009 10:59 AM To: kr...@mylist.net Subject: Re: KR> Update from the archives - Polyester fuel tanks Hi Folks, I have noticed the recurring discusion about tank sealers, and their susceptability to problems wh

KR> Update from the archives - Polyester fuel tanks

fuel for certified planes. > > Mike Taglieri miket--...@juno.com > > Everyone has his reasons. > - Jean Renoir "The Rules of the Game" > > > > - Original Message - > From: > To: > Sent: Wednesday, November 25, 2

KR> Update from the archives - Polyester fuel tanks

of the Game" - Original Message - From: To: Sent: Wednesday, November 25, 2009 1:59 PM Subject: Re: KR> Update from the archives - Polyester fuel tanks Hi Folks, I have noticed the recurring discusion about tank sealers, and their susceptability to problems when usi

KR> Update from the archives - Polyester fuel tanks

Hi Todd, I have used something like you describe below to coat the inside of a metal (steel) motorcycle tank that had rusted years ago. The kit came with an acid for cleaning and etching the inside of the tank for adhesion. The stuff I had was a two part I think, white in color and looked like w

  1   2   3   >