Mike I have used MEK in the past to smooth out orange peel in the past on small parts. Never on the entire project. It works well and does not effect the strength of any work under it. Rick PS if you do this make sure it is well vented.
On Mon, Jun 20, 2016 at 2:09 PM, Mike Sylvester via KRnet < krnet at list.krnet.org> wrote: > Ok Guys, I have taken the week off to sand the primer and paint the plane. > Let me start by saying that something I thought was a good thing in the > past has come back to bite me. In the building process as I finished a part > of the plane I would prime it by rolling on 2 part epoxy high fill primer, > yes I said, roll it on with little foam rollers. This leaves a slight > orange peel texture and this stuff is killer to sand down to smooth. What I > thought I could do in two days is going to take all week. I hope we sing > the sanding song at the gathering because I am definitely earning the right > to sing it, Hell, I might even lead the thing. > > > Mike Sylvester > kr2s builder > Birmingham,AL. > > Cell no.205-966-3854 > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options >
