Re: KRnet> Diehl accessory case - alternator stator ring

I understand that Art at Great Plains is in hospital and may not come out. The person you need to contact is Jarred Cline at Soulflyer Aviation. 402-637-8572. On Sun, Jul 28, 2024, 3:05 PM Chris Gardiner via KRnet wrote: > Fellow KR heads; > > Does anyone know where I can get a replacement stato

Re: KRnet> Lipo Battery

your "dynamo" may not be working as intended and now is a good time to verify it also.Good luck Bill Jacobs Daytona Beach, Fl. On Thursday, June 13, 2024 at 02:14:22 PM EDT, shafferj45...@twc.com wrote: Hi Mark. I am using an Odyssey  Battery, in my KR. A battery that sh

Re: KRnet> amazing web siste

Thanks for the reminder Larry. The amount of data that's out there and the way that it is available is just another reminder as to what great technology times we live in. Regards, Bill Sent from Yahoo Mail on Android On Sun, Nov 5, 2023 at 7:22 PM, Larry Flesner via KRnet wrote:

Re: KRnet> Insurance

Check out 02 Sports Insurance. They have flat rates based on take-off weight of aircraft. Liability only, and have to be member of USUA. (United States Ultralight Association). On Thu, Aug 17, 2023, 7:11 AM n357cj via KRnet wrote: > Hi, > I had found that SkySmith had acceptable rates when I f

Re: KRnet> Slurry

Any polyester tape will work. I use "flash" tape available from aircraft spruce. Around $18 a roll and will last forever. On Wed, May 17, 2023, 10:41 AM brendan palmer via KRnet < krnet@list.krnet.org> wrote: > I use duct tape or packing tape. I use aeropoxy and it doesn't seem to > stick to eith

Re: KRnet> Pete Klapp crash comments from NTSB

Thanks Mark Bill Jacobs Daytona Beach ⛱️ On Tue, Jan 24, 2023 at 9:39 AM, Mark Langford wrote: The recently released Pete Klapp accident investigation update includes photos, toxicology, witness interview, logs.  Most telling was the witness interview (pilot overheard Pete's

Re: KRnet> Max Fuel tank Capacities.

Hello Colin.Thanks for the information. It's good to hear feedback from an actual source. Aside from drawing flak from the spin test mention, I can appreciate hearing sage advice from the actual participant.Regards,Bill Jacobs Daytona Beach, Fl. On Tuesday, January 10, 2023 at 06:47:

Re: KRnet> Brakes

I have black max brakes on my Ultralight and type1 transmission fluid is recommended. Been using it for years. No problem and a whole lot cheaper. I would not use it on certified system. On Sun, Nov 20, 2022, 4:53 PM Chad Robertson via KRnet wrote: > I am getting my brake system ready to install

Re: KRnet> Leaving the group

And miss all of this?? 😆😅🤣😂 Bill Jacobs Daytona Beach ⛱️ (386) 682 7516 On Sat, Nov 5, 2022 at 12:49 PM, hansardelectric--- via KRnet wrote: I would like to be taken out of the group Thank you, Paul Hansard Hansard Electric 678-956-0468 hansardelect...@gmail.com -- KRnet

Re: KRnet> First landing in a KR

I enjoyed it!!😁 Bill Jacobs Daytona Beach ⛱️ (386) 682 7516 On Tue, Jul 19, 2022 at 1:44 AM, Gary Sack via KRnet wrote:  Gary Sack, 81JM-- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet -- KRnet mailing list KRnet@list.krnet.org https

Re: KRnet> Propeller discussion

Try: wwwPerformancePropellersUSA.com. The owner is Frank Johnson. You can reach him at: fr...@performancepropellersusa.com. Telephone: 713.417.2519 On Mon, Jul 18, 2022, 7:52 PM Tony King via KRnet wrote: > Bolly (in Australia) might be worth a look too - bollyaviation.com.au > > TK > > On Tue,

Re: KRnet> Alcon Helice (Alcon Propellers) In Argentina

The finest propellers I have ever used is Performance propellers made in u.s. Each propeller is designed for the aircraft to be used on, based on your specs. Free re- pitch one time. However, there is a 6 mo. delivery. To date I own 3. On Thu, Jul 14, 2022, 7:41 AM Matt Naiva via KRnet wrote: >

Re: KRnet> Dealing with the FAA on rebuild

Good luck. I applied for registration on new homebuilt. Applied in early Feb. They are working on mid January at this date. I don't plan to get it anytime soon. Took my son 14 months and 3 applications. On Sun, Jul 10, 2022, 7:42 AM Craig Williams wrote: > So far so good. Looks like the gear ch

Re: KRnet> check this one out - Gene Knight's twin "22 Magnum"

ThanksReally nice assemble  The fact that the pictures are dated 20 years ago is what strikes me.He was 71 than.I just turned 69 😳 Bill Jacobs Daytona Beach ⛱️ (386) 682 7516 On Mon, Jun 20, 2022 at 2:59 PM, Mark Langford wrote: See http://krnet.org/krs/gknight/ for the detailed photos

Re: KRnet> Corvair weights

Sorry, not about weights. What are dates of kr gathering. I would like to attend if possible. On Mon, Apr 25, 2022, 12:24 PM George Schuld via KRnet wrote: > > > See http://www.n56ml.com/corvair/95hp/270hrs about 4/5 of the way down. > The number that I keep coming up with is 245 lbs, with "e

Re: KRnet> "account disabled due to excessive bounces" message

Your a Good man Charlie Brown 👍 Sent from Yahoo Mail on Android On Sun, Mar 27, 2022 at 9:44 PM, Mark Langford wrote: Apparently some folks have had their KRnet email "disabled" by the system, due to messages from the list being rejected by email host providers for whatever reason.  I ha

KR>Re: KRnet Digest, Vol 212, Issue 1

D'oh! I do apologizeAnd you are absolutely right. I Just "assumed" the support was still there. Bill Jacobs Daytona Beach, Fl. On Sunday, January 16, 2022, 01:37:24 PM EST, Jamie Lockhart via KRnet wrote: I’ve been trying to purchase official KR plans for a couple

KR>Re: KRnet Digest, Vol 212, Issue 1

IMHO.Wouldn't you rather support the KR community buying the official/serialized  plans?Besides being a bootleg copy of copyrighted material. How many copies of copies made along with the additional degradation added ea. time?  Again, just my 2c.Regards.Bill Jacobs Daytona Beach, Fl. On Su

KR>Re: Fwd: Propeller Selection for Homebuilts Webinar Starts Soon!

Thanks Mark for the heads up!Regards Bill Sent from Yahoo Mail on Android On Tue, Jul 6, 2021 at 8:09 PM, Mark Langford wrote: The subject webinar just started (7PM CST), hosted by a Sensenich prop engineer.  The best props I've ever flown on my KR have been Sensenich props.    I

KR>Re: Kitplanes weekly article

Excellent response!Short, elegant and factual.Regards,Bill Jacobs Daytona Beach, Fl. On Friday, June 18, 2021, 04:32:46 PM EDT, Flesner wrote: KitPlanes magizine weekely e-mail had an article on composite construction entitled "resin infusion" that opened with the

KR>Re: Mosler 1915 conversion

Engine is mounted. With tail up to horizontal oil pressure to 65 psi in about 5 rev., then immediately dropped to 0. With tail down 0 oil pressure. Oil is full level. Oil cooler is dry. This conversion has case mounted oil filter. On Thu, May 27, 2021, 4:20 PM Mark Langford wrote: > Bill P

KR>Mosler 1915 conversion

Does anyone have information on the re-building of a Mosler 1915 vw conversion engine. I aquaired a new pickled Mosler engine. Tore it down, cleaned, replaced bearings, etc. , assembled it. No oil pressure, oil pressure builds to 65 psi and then drops to 0. Any suggestions, other than buying one f

KR>Re: seat belts

I purchased a beautiful set from Walmart on line . Set of 2 in light blue for about 44 dollars. Real bargain. On Thu, May 20, 2021 at 4:11 PM Craig Williams wrote: > Lots of options out there. > > > https://www.summitracing.com/parts/sim-29061bk > > https://www.jegs.com/c/Safety-Seats_Safety-Har

KR>Re: NV Aero

Have attempted to contact him via e-mail,text, phone calls in excess of 50 times. he will not respond. He has had my Ellison throttle body for re-build for over 4 months. He has me grounded. I do not know what to do. ANY SUGGESTIONS? On Sat, Apr 24, 2021 at 12:17 PM jeb wrote: > Does anyone kno

Re: KR> vw engine parts

checked this morning. gpasc.com is still there. On Fri, Feb 12, 2021 at 8:08 AM rbarnett via KRnet wrote: > I may have what you need contact me offline 417 576 1386 Russ Barnett KR > 2Sent from my Verizon, Samsung Galaxy smartphone > Original message From: Forest Rothwell via KR

Re: KR> Stability and landings.

Analysis paralysis its called.But seriously, get in the air and you'll figure it out 🤔Good Luck,Bill Sent from Yahoo Mail on Android On Thu, Feb 11, 2021 at 12:28 PM, Randall Smith via KRnet wrote:  Y'all worrying about things you really don't need

Re: KR> Propeller Choices vs. Upgraded Revmaster 2100D - Culver & Sterba

You may want to research Performance Propellers USA at PerformancePropellersUSA.com. His name is Frank Johnson and designs propellers based on your needs. Tele: 712-417-2519. On Sun, Oct 25, 2020 at 5:06 PM Samuel Spanovich via KRnet < krnet@list.krnet.org> wrote: > Sorry, I should have clarified

Re: KR> Propellers

Jeff, Mike,Just a quick reply to say" Thanks for the read"! Very insightful and informative. Lots of good information.Plus I've learned a new word apoplectic. It's appreciated. Regards, Bill Jacobs Daytona Beach, Fl. On Saturday, October 24, 2020, 7:44:17 AM EDT,

Re: KR> Retirement

ndroid On Sat, Sep 5, 2020 at 3:47 PM, Dave Ferguson via KRnet wrote: 30 min. Down the mountain from my house. Live in Asheville. Good group of people at Shiflet. On Sat, Sep 5, 2020, 2:14 PM Bill Jacobs via KRnet wrote: >    Shiflet Field 9A9 in Marion NC. Susan and I are planning on

Re: KR> Retirement

Wow!Very nice😁 Sent from Yahoo Mail on Android On Sat, Sep 5, 2020 at 3:48 PM, Dave Ferguson via KRnet wrote: I have 46 Taylortcraft, 1965 Cessna 150. Refurbishing Kr2 Dumbo. On Sat, Sep 5, 2020, 2:14 PM Bill Jacobs via KRnet wrote: >    Shiflet Field 9A9 in Marion NC. Susan and I

Re: KR> Retirement

😄 Haha! Susan of course "winky 😁 winky" Sent from Yahoo Mail on Android On Sat, Sep 5, 2020 at 2:43 PM, Flesner via KRnet wrote: On 9/5/2020 1:13 PM, Bill Jacobs via KRnet wrote: > And have just fallen in love with her. ++++++ Bill,

Re: KR> Retirement

e few spots that have have a house, hanger garage and workshop together.  My Sonerai 2L seems to have the same issue's as your KR. They don't build them selves.Regards, Bill Jacobs Daytona Beach, Fl. On Saturday, September 5, 2020, 12:57:45 PM EDT, Dave Ferguson via KRnet wr

Re: KR> Retirement

ast 45 years ready for the new custodians. We've picked out a small airport community in N.C. to finally be able to live, build and fly out of the same place. And not be interrupted by work! I am so looking forward to it! Good luck! Bill Jacobs Daytona Beach, Fl. On Friday, Septembe

Re: KR> Kitplanes correction.\

I will plan on flying 880AB, however, I will be 81 years old, so wait and see. On Thu, Jul 9, 2020 at 6:42 AM Craig Williams via KRnet < krnet@list.krnet.org> wrote: > I should be there with the new and improved Deer Slayer. > > Craig > > > > The 50th anniversary of the KR design happens in 2022,

Re: KR> Electric_Technical Report Idea

Mark send me a copy please.Thanks Bill Jacobs Daytona Beach, Fl. On Monday, June 15, 2020, 8:08:17 AM EDT, Mark Langford via KRnet wrote: Samuel Spanovich via KRnet wrote: >> For those that are curious, and want a copy of the report, send me your email, and I will get it

Re: KR> Revmaster 2100D - Electronic Ignition & Power Upgrades (Disclaimer: Engine Not Running)

Thanks Sam,Excellent feedback!Regards,Bill Sent from Yahoo Mail on Android On Sun, Apr 26, 2020 at 7:31 PM, Samuel Spanovich via KRnet wrote: A while back I posted regarding my Bendix D3000 magneto going out on me in flight (R-side only).  I will post those results back when the airplane

Re: KR> Test Flight #5 - Phase 1

Sid,Congratulations on gaining your medical clearance!! That is the biggie. Granted, the rest is a pain in the you know where. BUT your legal and the rest is nothing more than a momentary setback. Best regards,Bill Sent from Yahoo Mail on Android On Thu, Nov 14, 2019 at 7:41 PM, donald

Re: KR> radio work

Thanks a lot Larry!I've never heard about this. And it surely cuts down on the anxiety. Regards, Bill Jacobs Daytona Beach, Fl. On Thursday, November 14, 2019, 9:23:58 AM EST, Flesner via KRnet wrote: Moving around on the ground at a strange airport can often be more challe

Re: KR> propellers

Thanks Larry. Sent from Yahoo Mail on Android On Sat, Nov 2, 2019 at 8:31 PM, Flesner via KRnet wrote: As we all use propellers on our KR's you might find this video interesting. https://www.youtube.com/watch?v=0bP2MH3LqvI Larry Flesner ___

Re: KR> Update Steph and his dad

Bill Jacobs Daytona Beach, Fl. On Wednesday, October 2, 2019, 03:27:32 PM EDT, Stef den Boer via KRnet wrote: Steph,Thanks for the update, it has been awhile. You and your dad have more people following you than you may realize.Blue Sky's

Re: KR> KR Net Donations

al as words are cheap.Thanks again Mark Best regards, Bill Jacobs Daytona Beach, Fl. On Thursday, August 15, 2019, 9:07:27 AM EDT, John Bouyea via KRnet wrote: Oz, Thanks for the reminder to drop a donation towards Mark's KR Net out-of-pocket expenses. Online via Mark's Pay

Re: KR> Oshkosh Photo

Thanks Mark!It's much appreciated.Regards, Bill Jacobs Daytona Beach, Fl. On Monday, July 29, 2019, 10:53:58 AM EDT, mark jones via KRnet wrote: Just thought everyone would enjoy this photo which was taken over the course of four hours. According to the photographer he set his c

Re: KR> Home from Oshkosh?

Ok Mark.He's called u out!! Pictures, we want pictures of this "wonder wife" And does she have a sister 😳😀😆😇 Just kidding. Glad you made it back safe and sound!Regards,Bill Sent from Yahoo Mail on Android On Wed, Jul 24, 2019 at 6:30 PM, Flesner via KRnet wrote: .

Re: KR> Honeycomb

Be aware that the core in the ad is not for a usable panel but just for the nomex core Bill Masquelier Get Outlook for Android<https://aka.ms/ghei36> From: KRnet on behalf of Craig Williams via KRnet Sent: Sunday, July 14, 2019 6:08:02 PM To: KRnet Cc:

Re: KR> N886MJ

Good Summation! Bill Jacobs Daytona Beach, Fl. On Wednesday, May 29, 2019, 8:38:43 AM EDT, Flesner via KRnet wrote: On 5/29/2019 4:25 AM, Rogelio M. Serrano Jr. via KRnet wrote: > We need more data. This is experimental aviation and experiments need data to > s

Re: KR> 1000 hrs

Congratulations.  That quite a milestone. In more ways than one 👍 Sent from Yahoo Mail on Android On Sun, May 26, 2019 at 9:25 AM, n357cj via KRnet wrote: Hey guys, I finally got to and past the 1000 hours mark on N357CJ ___ Search the KRnet A

Re: KR> My baby is flying!!!!!

I have been following your build over the last 4+ year's since I joined this wonderful list. Please except my sincerest congratulations👍Here's to many many years of safe sky's!Regards,Bill Sent from Yahoo Mail on Android On Fri, May 3, 2019 at 1:13 PM, Mark Langford v

Re: KR> J Type Thermocouple wire

Yes join them, preferably by welding the twisted pair end. Do this by momemtarly touching across a 12v car battery. First, twist it a good number of tight turns, cut off all but 2 turns. Hold one end of the sensor wires on the neg post than drag the other end (twisted) across the pos wire. The r

KR> Any KR's at Sun N Fun 2019

Hello,Will there be any KR's making the trip to Sun N Fun this year?Regards, Bill Jacobs Daytona Beach, Fl. ___ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krne

KR> Tank sloshing etc.

Try Marine-Tex. Its made for underwater hull repairs. I have repaired properly prepped cracked engine blocks  (aluminum and steel ) along with gas tanks,  carburetors etc. Plus many types if plastics. I've never seen it fail Available locally at Ace.Regards,   Bill Jacobs, Daytona Beach Fl

Re: KR> Aerobatics

Owen, Thanks for taking the time to reply in depth. It is much appreciated.Regards, Bill Jacobs Daytona Beach, Fl. On Friday, October 12, 2018, 1:00:51 PM EDT, svd via KRnet wrote: Hi Stef, One issue to resolve for yourself before aerobatics in your KR would be spins

Re: KR> Mogas Blues... continued

Back in the 80's Every Junk yard in Volusia county Florida had one button labeled "out of order" on thier soda machine. It was the coldest spot for the beer of that particular owners preference 😉 Bill Jacobs, Daytona Beach Florida On Fri, Aug 17, 2018 at 7:31 PM, Jeff

Re: KR> Carburetor throttle cable screws and how are other guys securing it

luck and i hop this helps.Regards,  Bill Jacobs, Daytona Beach Florida ___ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.kr

Re: KR> Heat shielding the cowl

The guys that fly model jet turbines have the same problem and use a heat shielding cloth, check Bob Violet models for supply. That stuff worked well on my RV8 when I installed a four into one exhaust. Bill Zorc N2046F N7040E Sent from my iPhone > On Jul 24, 2018, at 12:34 AM, John Bou

Re: KR> flying to Oshkosh

Many Thanks!😉 Bill Jacobs, Daytona Beach Florida On Wed, Jul 4, 2018 at 1:57 PM, Flesner via KRnet wrote: Some helpful tips for those flying in to Oshkosh for the first time and even if you have been there before: ___ Search the KRnet

Re: KR> new KR synergy in the southeast/midwest

Thanks Mark!I needed that 😉 Bill Jacobs, Daytona Beach Florida On Mon, Apr 30, 2018 at 7:02 AM, Mark Langford via KRnet wrote: KRnetHeads, Now that the sucky winter is finally over, the KRs are coming out to see the world again. get your butt in gear and do something constructive

Re: KR> Photos on KRnet

Bill Jacobs, Daytona Beach Florida On Mon, Mar 12, 2018 at 4:28 PM, Mark Langford via KRnet wrote: Owen wrote: > This forum don’t really support photos in order to avoid bloat. The email list does support photos...I send one every few weeks or so just to prove it.  The limit o

Re: KR> Hookup alternator

Thanks Mark! From: KRnet on behalf of Mark Langford via KRnet Sent: Sunday, January 28, 2018 6:37 PM To: 'KRnet' Cc: Mark Langford Subject: Re: KR> Hookup alternator Bill Masquelier wrote: > Have a question for the group- we have a

KR> Hookup alternator

Have a question for the group- we have a Diehl case with alternator and have the correct AC voltages coming out (50,80,110 I think) but cannot get a rectifier/regulator to give us DC voltage. Does anyone have the specs/wiring diagram to get this working? Thanks Bill Masquelier

Re: KR> Paint

Look into this- works OK for some of us: https://store.preval.com/collections/preval-sprayer/products/preval-sprayer?gclid=EAIaIQobChMI9Pzr14X01gIVlTVpCh32wwgWEAQYASABEgI2kvD_BwE&variant=188709532 [http://cdn.shopify.com/s/files/1/0119/9992/products/Preval-complete_grande.png?v=1337876428]

Re: KR> KRnet stickers for sale at the Gathering - KRnet fundraising

Mark,I would like to buy 4 decals please.I PayPal you.Thank you,Bill Bill Jacobs, Daytona Beach Florida On Wed, Sep 13, 2017 at 10:05 PM, Mark Langford via KRnet wrote: ___ Search the KRnet Archives at https://www.mail-archive.com/krnet

Re: KR> KRnet stickers for sale at the Gathering - KRnet fundraising

Bill Jacobs, Daytona Beach Florida On Thu, Sep 14, 2017 at 7:07 PM, Rllanning via KRnet wrote: Mark           Can you tell me what the K&N oil filter part number is that is used on the gold oil filter system that William sales. Thank you Ask william

Re: KR> FREE Sitka Spruce

Earl, I can pickup that spruce this week, it will find a good home. Bill Zorc VP EAA Chapter 99 Vero Beach, FL 772-713-0607 cell Sent from my iPad > On Jun 18, 2017, at 5:06 PM, Earl Klinker via KRnet > wrote: > > Hi All, > > For many reasons, I am not going to bu

KR> Online Petition for KR2Worldtour

I just posted this to the KR faceBook page.. let's all give him our support Bill Wood Technical Consultant/R&D (EXT-262) Guspro (Ice King) Guspro Inc., Chatham, ON PH: 1-888-648-7776 / FX: 1-800-667-8742 -Original Message- From: KRnet [mailto:krnet-boun...@list.krnet.org]

Re: KR> I Passed!

Congratulations ✈✈✈ Bill Jacobs, Daytona Beach Florida On Sat, Jun 3, 2017 at 12:18 PM, bjoenunley via KRnet wrote: My KR2 was inspected by a DAR this morning and it passed without any issues!  Joe Nunley Baker Florida  ___ Search the

Re: KR> FAA Basic Med

Amen!  Bill Jacobs, Daytona Beach Florida On Mon, May 1, 2017 at 2:58 PM, Ronald Wright via KRnet wrote: Basic Med should have just followed the Light Sport rules.   ___ Search the KRnet Archives at https://www.mail-archive.com/krnet

Re: KR> FAA Basic Med

, I'm thinking it wouldn't make any difference if had the medical exam last year,  tomorrow or May 2ed.I've sent emails to AOPO which I've joined. But I havent received a response back.Thanks in advance for your input.Bill Bill Jacobs, Daytona Beach Florida On Fri, Apr

Re: KR> Cables and Nico press sleeves.

Thanks Colin! Bill Jacobs Daytona Beach, Fl. From: colin hales via KRnet To: "krnet@list.krnet.org" Cc: colin hales Sent: Wednesday, April 26, 2017 3:18 PM Subject: KR> Cables and Nico press sleeves. While everyone is barking on about what fluid to use in a compa

Re: KR> Compass fluid

Just a note to Stef- "Boeing" kerosene should not be used (here we call it "JP-4" or similar) Bill Masquelier From: KRnet on behalf of Jeff Scott via KRnet Sent: Wednesday, April 26, 2017 7:01 AM To: krnet@list.krnet.org Cc: Jeff S

Re: KR> airspeed indicator

I had a 1974 Chevrolet Vega with a 4 cylinder engine . It came with a 150 mph speedometer from the factory.And yes I know this isnt KR related.  Just funny. Bill Jacobs, Daytona Beach Florida On Fri, Apr 21, 2017 at 3:55 PM, Stef den Boer via KRnet wrote: Hi kr friends, I want to order

Re: KR> Archives Repopulated through 2003

Many thanks!Your efforts are greatly appreciated.Regards, Bill Jacobs Daytona Beach, Fl. On Wednesday, February 8, 2017 11:25 PM, John via KRnet wrote: John, Do you need the KR newsletters? I have #1 - 266. John Melvin In a message dated 2/7/2017 6:05:32 A.M. Mountain Standard

Re: KR> Melting lead

At work we salvaged a large amount of silver solder from a failed solder pot by using mapp gas instead of propane on the surface. That choice was driven by the shear amount involved.  Propane would have worked just fine.Regards, Bill Jacobs Daytona Beach, Fl. On Thursday, February 2, 2017

Re: KR> Melting lead

I melt lead easily over an old Coleman camping stove in an old (junk) pot- no problem Bill Masquelier From: KRnet on behalf of Paul Visk via KRnet Sent: Friday, January 27, 2017 7:26 PM To: KR EMAIL BOARD Cc: Paul Visk Subject: KR> Melting lead Firs

Re: KR> 4-into-1 exhaust system help?

Mark Do you necessarily need a 4 into1? How about something like this: http://chircoestore.com/dual-racing-exhaust-black-uses-baffle-251194.html [http://chircoestore.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/2/5/251190b.jpg]

Re: KR> engine update

Larry, Great progress!Regards, Bill Jacobs Daytona Beach, Fl. ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman

KR> Fwd: Stub wing leading edge stall strip

flying. So the question is. Do I put the one back on that is missing or do I take the other 3 off ? I am a long way from having her flying but not far from paint. Bill. C-GGGW Sent from my Samsung Galaxy smartphone. Craig Williams wrote: > Has anyone added a stall strip to the leadin

KR> trip

Larry,What radio do you have?Thank you,Bill Bill Jacobs, Daytona Beach Florida On Fri, Nov 11, 2016 at 3:36 PM, Larry Flesner via KRnet wrote: ?By the way, my little $250 hand held radio with external antenna has an easy 75 mile range.? Why spend more Larry Flesner

KR> Speed Brake & Flaps

Sent from my iPad On Nov 4, 2016, at 9:27 PM, Dan Prichard via KRnet wrote: > I designed the speed brake and flaps to operate separately. Travel time on > the speed is about 2 seconds to 85 degrees. You can see the flaps operate on > YouTube. Look for N257DP. For short field I was planning

KR> 11 year aniversary

?Bill Jacobs Daytona Beach, Fl. On Wednesday, October 19, 2016 6:35 PM, n357cj via KRnet wrote: Hello corvaircrafters and KR'ers, Today was the 11th anniversary of the first flight of N357CJ with a 3100 corvair. I got home a tad late to get a flight in to celebrate but I did get to

KR> Texting ac

). No more language or reception barriers. Bill Darden

KR> Cowling Air Scoop

Hello Sid,I was wondering the same question as Leif?Is there a ratio of the areas?Thanks,Bill Jacobs Daytona Beach, Fl. On Thursday, June 30, 2016 3:58 AM, Leif G Alstads?ter via KRnet wrote: Hi Sid I just look at your photo of your cowling, I just wonder whats the area on the front

KR> looking for an engine

to grasp about the original lay out of this awesome little bird. I am currently 50 miles south east of Detroit in Chatham Ontario. Thanks everyone. Bill Wood Technical Consultant/R&D (EXT-262) Guspro (Ice King) Guspro Inc., Chatham, ON PH: 1-888-648-7776 / FX: 1-800-667-8742

KR> Brainless posters

would have been fine..??DON'T BE A JACK ASS!RegardsBill Jacobs Daytona Beach, Fl. On Saturday, June 25, 2016 6:42 PM, Mike Stirewalt via KRnet wrote: ? ? "Wanna sell it? Bill Jacobs" How about taking your private business propositions off net and also learning how to put

KR> Microsoft#$%*

Turn OFF auto updates.That's the only way to stop it from what I've heard at work.Regards, ?Bill Jacobs Daytona Beach, Fl. On Saturday, June 25, 2016 12:06 PM, Larry Flesner via KRnet wrote: Microsoft users BEWARE !!! I purchased a refurbished laptop last September so I

KR> VW Engines

There are a couple of versions of an additional front mounted bearing. It's called a 5th bearing, BTA, (better than air), etc. Go to flycorvair.net or Dan Wesemans Fly with? SPA. Or google Corvallis 5th bearing.?Bill Jacobs Daytona Beach, Fl. On Thursday, June 23, 2016 12:44 PM,

KR> Ethanol Continued

Thanks,good additionial data points!Regards,Bill Sent from Yahoo Mail on Android On Wed, Jun 8, 2016 at 11:41 AM, Gibson Racing Group via KRnet wrote: Hey, guys.? I usually just lurk, absorb the (often extremely) useful information I run across here, and take the rest with a grain of salt

KR> Rainy Day Youtube.

Thanks Owen!I've really enjoyed these.:D?Bill Jacobs Daytona Beach, Fl. On Saturday, April 9, 2016 4:31 PM, svd via KRnet wrote: I found the entire ?Wonderful World of Flying? series on youtube!? Dated and funny, but worth checking out on a rainy day or night: https://www.youtub

KR> Alternative Engines

We (Larry Bell and I) have most of a VW type 4 that we would sell fairly cheap Bill Masquelier From: KRnet on behalf of bjoenunley via KRnet Sent: Friday, March 4, 2016 1:32 PM To: KRnet Cc: bjoenunley Subject: KR> Alternative Engines Dear All, I am

KR> VW engines

Nice explanation.Thanks, ?Bill Jacobs Daytona Beach, Fl. On Saturday, January 23, 2016 9:04 AM, Mark Langford via KRnet wrote: Mike Stirewalt wrote: > Would somebody take the time to explain why the Type IV engine is not > the engine you usually see in homebuilts. Why is the

KR> Piston rings

If anyone is interested on a couple of O-290 (ground power unit) engines- a friend of mine has a pair (ALL IN PIECES) of them. They were for his Thorpe 18 but he got an O-320 for it and now they are spare. If he were to get $100 per engine I think that he would be happy. He (and I) are in the San

KR> Personal info on the map

Gary Here it is: https://www.zeemaps.com/map?group=1778611 Bill > To: krnet at list.krnet.org > Date: Wed, 30 Dec 2015 08:58:58 -0600 > Subject: Re: KR> Personal info on the map > From: krnet at list.krnet.org > CC: pilotgary at charter.net > > What is the map link again

KR> Convenience Map

I'm on too now, in the San Diego area BillM

KR> Tire size

Is anyone familiar withKR2 2 Place Side by Side Low Wing Monoplane | ? | | ? | | ? | ? | ? | ? | ? | | KR2 2 Place Side by Side Low Wing MonoplaneUS $3,500.00 Used in eBay Motors, Other Vehicles & Trailers, Aircraft | | | | View on www.ebay.com | Preview by Yahoo | | | | ? | ?Bill Ja

KR> Flywheel Drive for a VW?

Who's "they"?Thanks, ?Bill Jacobs Daytona Beach, Fl. On Monday, November 23, 2015 11:16 AM, tinyauto--- via KRnet wrote: Steve Wittman had flywheel drive VW drives for the V Witt aircraft.? They just sold a complete V Witt needing restored with a flywheel drive engine

KR> Using water temp gauge for oil temp

You are using a Smiths gauge? I hope that you won't be using Lucas switches!!! :) (I drive MG's too) BillM -seriously, I am also planning to use a water gauge for my oil temp, should work, temp is temp and the pressure really isn't that much. Bill -

KR> Mark Langford talk on fiberglass at 2015 Gathering

Thanks for taking the time to document.It's much appreciated,?Bill Jacobs Daytona Beach, Fl. On Friday, November 20, 2015 12:38 PM, James McGauhey via KRnet wrote: I finally finished editing and producing the video of Mark's Fiberglass 101 talk at the 2015 Gathering.? It&

KR> KR wing tanks for sale

We have a pair of wing tanks, look brand new but were installed in my project plane prior to removal. They are 10 gallons each and fit in the outer wing bays. Asking $600.00 for the pair but willing to talk Located in San Diego area (El Cajon) Bill Masquelier

KR> KR parts for sale

We have a VW type IV engine (complete except for the jugs and pistons) for sale. Asking $600.00 but willing to talk! Located near San Diego (El Cajon) I have pictures and will send them to anyone interested Bill Masquelier

KR> Jet vs Turbo prop?

that it is a turbo prop? Correct? Otherwise, if it was a jet, it would use exhaust thrust out the rear and wouldn't have a prop? Correct? Bill jet engine > On Nov 2, 2015, at 4:43 PM, Chris Prata via KRnet list.krnet.org<mailto:krnet at list.krnet.org>> wrote: >

KR> KR2 project for sale

wjacobs at sparton.comThanks a lot,or.. email at work?Bill Jacobs Daytona Beach, Fl. On Monday, October 26, 2015 6:00 AM, Richard Kaczmarek via KRnet wrote: Well the time has come to clean out the hanger. Our business needs the space to start production of a new kit plane. We no longer

  1   2   3   >