On Mit, 2002-03-20 at 11:34, Fabian Fagerholm wrote:
> I have a Dell Inspiron 8000 and a slight problem with irda. The i8k
> seems to have an SMC irda chip, and thus the smc-ircc module is the one
> to be used.
>
> However, for some reason I can't get the module to load correctly on the
> first at
On Mit, 2002-03-20 at 11:34, Fabian Fagerholm wrote:
> I have a Dell Inspiron 8000 and a slight problem with irda. The i8k
> seems to have an SMC irda chip, and thus the smc-ircc module is the one
> to be used.
>
> However, for some reason I can't get the module to load correctly on the
> first a
Hein Roehrig wrote:
> Ok, I tried again several combinations and no matter what I do, IR
> stops functioning (as indicated by irdadump) as soon as I modprobe
> maestro3. What I did is change the IR port to FIR and COM4, remove any
> lines in /etc/serial.conf, boot with/without apm and maestro3. My
Hein Roehrig wrote:
> Ok, I tried again several combinations and no matter what I do, IR
> stops functioning (as indicated by irdadump) as soon as I modprobe
> maestro3. What I did is change the IR port to FIR and COM4, remove any
> lines in /etc/serial.conf, boot with/without apm and maestro3. My
pgpNyqJEkAAQ8.pgp
Description: PGP message
msg07162/pgp0.pgp
Description: PGP message
On Wed, 2002-03-20 at 17:01, Robert Waldner wrote:
> On the I8100, rebooting is just fine.
I guess at least with 2.4.18 on i8000 it is too. Well, why should anyone
want to boot the thing anyway?
> BTW, the changes I spoke of (diff -u), credits Christian Mock:
> .-.-.-.-.-.-.-.-.-.
> smc-ircc.cm s
On Wed, 20 Mar 2002 16:28:34 +0100, Hein Roehrig wrote:
> Er, stupid question: your summary seems to indicate that IR keeps
> working when the maestro3 driver is loaded (as long as the maestro3
> driver is loaded after irtty.)
>
> On my 8100 with 2.4.18, SIR in BIOS on COM2, things stop functioning
On Wed, 2002-03-20 at 18:18, Frank Trenkamp wrote:
[on module loading order]
> However, with kernel 2.4.18 this problem just disappeared. A good soul named
> Michal Ceresna (his credits here) sent me a patch as feedback to an
> installation report I published via www.linux-on-laptop.net:
>
> Tha
On Wed, 2002-03-20 at 16:58, Joris wrote:
> On Wed, Mar 20, 2002 at 04:09:32PM +0200, Fabian Fagerholm wrote:
> > On Wed, 2002-03-20 at 14:43, Robert Waldner wrote:
> To whoever posted about that meastro3 module loading after irda stuff, my
> thousandfold thanks!
>
> I belive this is the key why I
On Wed, 2002-03-20 at 16:09, I wrote:
> When you have successfully set this up, you can start using software
> that works with irda. The device to use is /dev/ttyS3. Remember, in
> Debian, the serial ports are owned by the dialout group. In order to
> allow use of such a port to a user, add the use
On Wed, 2002-03-20 at 17:01, Robert Waldner wrote:
> On the I8100, rebooting is just fine.
I guess at least with 2.4.18 on i8000 it is too. Well, why should anyone
want to boot the thing anyway?
> BTW, the changes I spoke of (diff -u), credits Christian Mock:
> .-.-.-.-.-.-.-.-.-.
> smc-ircc.cm
On Wed, 20 Mar 2002 16:28:34 +0100, Hein Roehrig wrote:
> Er, stupid question: your summary seems to indicate that IR keeps
> working when the maestro3 driver is loaded (as long as the maestro3
> driver is loaded after irtty.)
>
> On my 8100 with 2.4.18, SIR in BIOS on COM2, things stop functionin
On Wed, 2002-03-20 at 18:18, Frank Trenkamp wrote:
[on module loading order]
> However, with kernel 2.4.18 this problem just disappeared. A good soul named
> Michal Ceresna (his credits here) sent me a patch as feedback to an
> installation report I published via www.linux-on-laptop.net:
>
> Th
On Wed, 2002-03-20 at 16:58, Joris wrote:
> On Wed, Mar 20, 2002 at 04:09:32PM +0200, Fabian Fagerholm wrote:
> > On Wed, 2002-03-20 at 14:43, Robert Waldner wrote:
> To whoever posted about that meastro3 module loading after irda stuff, my
> thousandfold thanks!
>
> I belive this is the key why
On Wed, 20 Mar 2002 16:28:34 +0100, Hein Roehrig writes:
>Er, stupid question: your summary seems to indicate that IR keeps
>working when the maestro3 driver is loaded (as long as the maestro3
>driver is loaded after irtty.)
The question is _not_ stupid.
And yes, on my I8100, it continues work
On Wed, 2002-03-20 at 16:09, I wrote:
> When you have successfully set this up, you can start using software
> that works with irda. The device to use is /dev/ttyS3. Remember, in
> Debian, the serial ports are owned by the dialout group. In order to
> allow use of such a port to a user, add the us
Hi,
> On the 8100 the problem is that the maestro3-module mustn't be loaded
> when modprobe'ing irda-stuff. It even mustn't habe been loaded since
> last boot. If you load the irda-stuff prior to maestro3, there's no
> problem at all.
it was exactly the same for me (was time-consuming to figur
On Wed, 20 Mar 2002 16:28:34 +0100, Hein Roehrig writes:
>Er, stupid question: your summary seems to indicate that IR keeps
>working when the maestro3 driver is loaded (as long as the maestro3
>driver is loaded after irtty.)
The question is _not_ stupid.
And yes, on my I8100, it continues wor
pgp2zjzAhiEJ1.pgp
Description: PGP message
Hi,
> On the 8100 the problem is that the maestro3-module mustn't be loaded
> when modprobe'ing irda-stuff. It even mustn't habe been loaded since
> last boot. If you load the irda-stuff prior to maestro3, there's no
> problem at all.
it was exactly the same for me (was time-consuming to figu
On 20 Mar 2002 16:09:32 +0200, Fabian Fagerholm writes:
>> #include
>#include
;)
<...>
>Notes:
>- Only works with SIR so far, so you won't get the 4 megabits-per-second
> speeds of FIR (Fast InfraRed). SIR is serial speed, so 115200 bps.
>- Kernel: Linux 2.4.18.
<...>
...and 2.2.20, at least.
On Wed, 2002-03-20 at 14:43, Robert Waldner wrote:
>
> #include
#include
> Well, I don't have any FIR-capable device to test against, so it's
> somewhat pointless for me.
Figures. It's not critical for me either, I'd just like to sort the
thing out just in case I ever have a real need for it
msg07144/pgp0.pgp
Description: PGP message
On 20 Mar 2002 16:09:32 +0200, Fabian Fagerholm writes:
>> #include
>#include
;)
<...>
>Notes:
>- Only works with SIR so far, so you won't get the 4 megabits-per-second
> speeds of FIR (Fast InfraRed). SIR is serial speed, so 115200 bps.
>- Kernel: Linux 2.4.18.
<...>
...and 2.2.20, at least
#include
On 20 Mar 2002 14:35:50 +0200, Fabian Fagerholm writes:
>> I'm writing this on an 8100. `lsmod|grep ir`:
>> irtty 7340 2 (autoclean)
>> irda 129241 1 (autoclean) [irtty]
>
>Ok, so you're not using the smc-ircc module at all?
I don't.
>It may
On Wed, 2002-03-20 at 12:57, Robert Waldner wrote:
> I'm writing this on an 8100. `lsmod|grep ir`:
> irtty 7340 2 (autoclean)
> irda 129241 1 (autoclean) [irtty]
Ok, so you're not using the smc-ircc module at all? It may very well be
impossible to get FIR
On Wed, 2002-03-20 at 14:43, Robert Waldner wrote:
>
> #include
#include
> Well, I don't have any FIR-capable device to test against, so it's
> somewhat pointless for me.
Figures. It's not critical for me either, I'd just like to sort the
thing out just in case I ever have a real need for i
On 20 Mar 2002 12:34:28 +0200, Fabian Fagerholm writes:
>I have a Dell Inspiron 8000 and a slight problem with irda. The i8k
>seems to have an SMC irda chip, and thus the smc-ircc module is the one
>to be used.
I'm writing this on an 8100. `lsmod|grep ir`:
irtty 7340 2 (auto
#include
On 20 Mar 2002 14:35:50 +0200, Fabian Fagerholm writes:
>> I'm writing this on an 8100. `lsmod|grep ir`:
>> irtty 7340 2 (autoclean)
>> irda 129241 1 (autoclean) [irtty]
>
>Ok, so you're not using the smc-ircc module at all?
I don't.
>It may
On Wed, 2002-03-20 at 12:57, Robert Waldner wrote:
> I'm writing this on an 8100. `lsmod|grep ir`:
> irtty 7340 2 (autoclean)
> irda 129241 1 (autoclean) [irtty]
Ok, so you're not using the smc-ircc module at all? It may very well be
impossible to get FI
I have a Dell Inspiron 8000 and a slight problem with irda. The i8k
seems to have an SMC irda chip, and thus the smc-ircc module is the one
to be used.
However, for some reason I can't get the module to load correctly on the
first attempt. By doing two successive modprobes, the module is loaded.
On 20 Mar 2002 12:34:28 +0200, Fabian Fagerholm writes:
>I have a Dell Inspiron 8000 and a slight problem with irda. The i8k
>seems to have an SMC irda chip, and thus the smc-ircc module is the one
>to be used.
I'm writing this on an 8100. `lsmod|grep ir`:
irtty 7340 2 (aut
I have a Dell Inspiron 8000 and a slight problem with irda. The i8k
seems to have an SMC irda chip, and thus the smc-ircc module is the one
to be used.
However, for some reason I can't get the module to load correctly on the
first attempt. By doing two successive modprobes, the module is loaded.
34 matches
Mail list logo
