On 20 Mar 2002 12:34:28 +0200, Fabian Fagerholm writes: >I have a Dell Inspiron 8000 and a slight problem with irda. The i8k >seems to have an SMC irda chip, and thus the smc-ircc module is the one >to be used.
I'm writing this on an 8100. `lsmod|grep ir`: irtty 7340 2 (autoclean) irda 129241 1 (autoclean) [irtty] >However, for some reason I can't get the module to load correctly on the >first attempt. By doing two successive modprobes, the module is loaded. On the 8100 the problem is that the maestro3-module mustn't be loaded when modprobe'ing irda-stuff. It even mustn't habe been loaded since last boot. If you load the irda-stuff prior to maestro3, there's no problem at all. >I suspect this might have something to do with my serial port settings, >but I haven't managed to figure out what to put in /etc/serial.conf to >work this out. There's a line for /dev/ttyS3 that has the same io >address and irq as the smc chip, but nothing I've done seems to change >this behaviour. I don't have any entry in serial.conf other than ttyS0. cheers, &rw -- / Ing. Robert Waldner | Security Engineer | CoreTec IT-Security \ \ <[EMAIL PROTECTED]> | T +43 1 503 72 73 | F +43 1 503 72 73 x99 /
msg07138/pgp00000.pgp
Description: PGP signature
