#include<pls_dont_cc_me_on_mailing_lists.h>
On 20 Mar 2002 14:35:50 +0200, Fabian Fagerholm writes: >> I'm writing this on an 8100. `lsmod|grep ir`: >> irtty 7340 2 (autoclean) >> irda 129241 1 (autoclean) [irtty] > >Ok, so you're not using the smc-ircc module at all? I don't. >It may very well be >impossible to get FIR working with this hardware, so I guess I'll have >to settle for SIR, which means that I can stop thinking about smc-ircc. Well, I don't have any FIR-capable device to test against, so it's somewhat pointless for me. >Is there anyone out there who has smc-ircc working? I suspect it may be >possible to make it work but something tells me it won't be easy. A colleague of mine got it to work with minor changes, I'll get you the details. >Could you show me your /etc/irda.conf? .-.-.-. #irda.conf Version: 1.0 IRDADEV=/dev/ttyS3 DONGLE=none DISCOVERY=-s ENABLE=yes # if you don't need to start irattach, set "no" .-.-.-. >I'm not really sure which device >I should irattach to. I got some packets through (looking with irdadump) >when irattaching to /dev/ircomm0, but after just one or two packets, the >transmission stopped. I may have to shut down completely and do a cold >boot because, as you said, the maestro3 module mustn't have been loaded >at all before the irda stuff. That's the maestro3-symptom, AFAIR. cheers, &rw -- / Ing. Robert Waldner | Security Engineer | CoreTec IT-Security \ \ <[EMAIL PROTECTED]> | T +43 1 503 72 73 | F +43 1 503 72 73 x99 / -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
