I installed one on Pegasus, I ran the vent above the waterline, and put a
small loop in. The purpose of the line is to vent air from the seal to
prevent the carbon seal ring from burning up.
On Fri, Feb 16, 2018 at 6:17 PM, David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> I had a PSS
I have this one and it works great. 1 antenna for your VHF, AIS and AM/FM.
It does require a 12v supply of its own, mine is powered when I power the
VHF.
https://www.milltechmarine.com/Comar-ASR-100-VHFAIS-Antenna-Splitter_p_151.html
Doug Mountjoy
Rebecca Leah
LF39
On Thu, Feb 22, 2018 at 5:50
I reported back in November that a friends Universal M-25 engine was
overheating. I won't mention it is in a Catalina 36. After investigating,
found the # 2 piston burned badly, head gasket was blown. The decision to
rebuild was made and I proceded to do the work. I replaced the main and rod
bearin
Hi Chuck,
On my LF38, When I removed the old track several bolts broke off. I sent
the old track to Garhauer to have the new track drilled with the mounting
holes in different locations. Guido did this at no additional charge. I
then added a piece of 1 in square aluminum tubing to raise the track
Geoff,When I started living aboard it was on my old ba-ba-bayliner 27. Ex-wife
made it so I couldn't afford to live on land. That was 14 years and 3 boats
ago. I wouldnt recommend the 27. Next boat I got smart and bought Pegasus a
1979 C&C Landfall 38. 10 years on her. Current and forever (how m
At the airline I work for we wash turbine engines in basicly the same fashion.
A turbo is a very simple version of a turbine engine.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: Bill Coleman via CnC-List
Date: 7/19/18 11:12 (GMT-08:00) To:
Tom, have you tried J&G marine in Tacoma on the tide flats? 253-572-4217Doug
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: Tom Buscaglia via CnC-List
Date: 7/23/18 10:32 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: Tom Buscaglia Subject: Stus-Li
I like it. Hey, wait a minute I'm in that list somewhere.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: Stu via CnC-List
Date: 7/25/18 08:50 (GMT-08:00) To: C&C Email List
Cc: Stu Subject: Stus-List
Bilge pump humor
How many email list
Welcome Bruce. Sounds like you now have a great boat.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: Bruce Pope via CnC-List
Date: 7/26/18 07:53 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: Bruce Pope Subject: Re: Stus-List
Thoughts on bilge pu
Happens, especially when said breaker is used as a switch like we do on our
boats. Circuit breakers (at least on aircraft)were never designed to be used as
a switch.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: Tom Buscaglia via CnC-List
Date
I agree with Joe, your oil pressure is good. I would deffenetly mount a gauge
in the cockpit. I have both oil pressure and engine water temp on Rebecca Leah..
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: SEAN CONNER via CnC-List
Date: 8/5/18 0
Looks good.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: Dreuge via CnC-List
Date: 8/13/18 15:16 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: Dreuge Subject: Stus-List Landfall
38 stemhead bow roller replacement
Folks,
I mentioned some time
Removed both of the Jabsco heads on Rebecca Leah and replaced with manual
Raritan units. Had a Raritan on my last boat, went 10 years living aboard with
1 kit early on.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: robert via CnC-List
Date: 8/1
I second the HX890. I have 2. One with my mmsi.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: "Dennis C. via CnC-List"
Date: 8/16/18 05:41 (GMT-08:00) To: CnClist
Cc: "Dennis C." Subject: Re:
Stus-List Should I ditch the SSB
Highly recomme
Hi Eric,I had the same issue with one of my windows. To remove I use a
windshield removal tool.
m.harborfreight.com/windshield-removing-tool-60298.html?utm_referrer=direct%2Fnot
p
Works great for cutting the tape. Once the window is out the old tape will come
right off by rolling with your thum
Hi Kyle,I am at the port orchard yacht club. Do you have a single cylinder
Yanmar? Shoot me an email off line. I would be happy to help you with it. I
just got my girlfriend 's diesel running in her Sun 27. Good little engine.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Ori
If your racing then you want to use a gauge, especially if you pull the mast
every season. I just had my rig tuned by Port Townsend Rigging and I asked
lots of questions regarding tensioning rod rigging..For a cruising boat. They
set the rig so there is some bend aft, mast is straight and cente
Just checked my Marine beam mast head lights. No noise in my vhf.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
null___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want
Hi Kyle, That is the same engine in my girlfriends boat. Know it well.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
null___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If yo
Bill,Try port Townsend Rigging+1-360-385-6330They might have one laying around.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: WILLIAM WALKER via CnC-List
Date: 8/28/18 07:37 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: WILLIAM WALKER Subject: St
My girlfriend and I had sailed through the area Saturday and Sunday. Luckly we
missed it. On a side note in front of her place on Rich Passage are the remains
of submarine nets left over from either the cold war or WWII.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original
Dave, Not sure on tank size or where it is installed, but MARINE Sanitation
next door to fisheries is a great placed to source the tank from. Is there an
old deck fill for the head? That would give you an idea of where the tank might
have been. Having just replumbed my fwd head. I would put the
I would be interested in the reflecter. Is it the round type?
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: kelly petew via CnC-List
Date: 9/5/18 08:23 (GMT-08:00) To: cnc-list
Cc: kelly petew Subject: Stus-List
Donate to Stu's List - Get
Pete, I am interested in the reflector. Is it the round type?
ThanksDoug
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: kelly petew via CnC-List
Date: 9/5/18 08:23 (GMT-08:00) To: cnc-list
Cc: kelly petew Subject: Stus-List
Donate to Stu's L
Schafer makes a halyard restrained.
https://www.westmarine.com/buy/schaefer--halyard-restrainer-bracket--285538
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: Wade Harrogate via CnC-List
Date: 9/5/18 11:27 (GMT-08:00) To:
cnc-list@cnc-list.com
I have a Signed marine wind. And in a couple of months a Data marine set.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: David via CnC-List
Date: 9/10/18 05:42 (GMT-08:00) To: CNC CNC
Cc: David Subject: Stus-List
Instruments...
My son's
Brian,Those straps are for small tanks maybe 10 gal and under. Depends on how
big your tank is. On my 39 the tanks are held in place by blocks of wood
screwed to bulkheads. My tanks are all at least 30 gal. Hope this helps. Doug
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
O
Ron, Does your speed sensor shoot through the hull? If so what model is
it?Thanks Doug
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: Ron Ricci via CnC-List
Date: 9/14/18 10:22 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: Ron Ricci Subject: Re:
On Sep 14, 2018, at 2:23 PM, Doug Mountjoy via CnC-List
wrote:
Ron, Does your speed sensor shoot through the hull? If so what model is
it?Thanks Doug
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
___
Thanks everyone for supporting this list
A few years ago someone on the list here posted a link for health/medical
insurance designed for cruisers. I saved the email but Gmail deleted after a
couple of years. ThanksDoug
Sent from my T-Mobile 4G LTE DeviceDoug Mountjoy Port Orchard YC Rebecca Leah
Lf39_
I have a computer fan installed in my fridge seems to work. I'm also going to
install a motion activated led light soon in the fridge.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
null___
Thanks everyone for supporting this list with your c
Thanks Rick.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
null___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribut
That was funny. Hope no one was hurt.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.
Original message From: "Dennis C. via CnC-List"
Date: 9/22/18 09:28 (GMT-08:00) To: CnClist
Cc: "Dennis C." Subject: Stus-List
Love tap while racing or "rough start"
All this di
I had Pegasus my LF38 for 10 years, sold her when I bought my LF39 last
year.
>
> ___
>
> Thanks everyone for supporting this list with your contributions. Each
> and every one is greatly appreciated. If you want to support the list -
> use PayPal t
Dennis,
Have you tried Nevr-Dull? I use it on both my boat stainless and on the
chrome on my motorcycle.
Doug
>
>>
>>
>> ___
>
> Thanks everyone for supporting this list with your contributions. Each
> and every one is greatly appreciated. If you wan
Derrick,
Call Guido at Garhauer. He will help you with finding the best traveler. I
just had him help me with finding a new traveler for my LF39. Plus Garhauer
will modify it to fit your boat.
Doug
>
>
>>
>>
>>
>
>
--
Douglas Mountjoy
Port Orchard YC, WA
Rebecca Leah
LF39
_
ail for iPhone <https://yho.com/footer0>
>
> On Saturday, October 13, 2018, 12:48 PM, Doug Mountjoy via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Derrick,
> Call Guido at Garhauer. He will help you with finding the best traveler. I
> just had him help me with finding a
If your interested I have a Garmin 3206, which I am getting rid of. and
also a Garmin 3205. they both work. My chartplotter at the helm is NMEA
2000
and use a different chart chip. Email me off list if interested.
Doug
On Fri, Oct 19, 2018 at 6:06 AM Chris Graham via CnC-List <
cnc-list@cnc-list.c
I'm using AGM's only because of the location. House batteries are under
the saloon floor, and sit at an angle.
Doug Mountjoy
sv Rebecca Leah
1988 C&C landfall 39
Port Orchard, WA
On Sun, Sep 22, 2019 at 6:29 PM Peter Cowenhoven via CnC-List <
cnc-list@cnc-list.com> wrote:
> Anyone still use fl
When I bought Rebecca Leah 2.5 years ago. The surveyor noticed that the
prop blades were loose. I pulled the prop and sent it to a local Prop shop.
I was just told that it was not repairable by them. My next step is to take
it to PYI in Lynnwood WA for their opinion. I my be in the market for a new
David,
I installed these on Rebecca Leah's holding tanks. The warning light type,
very easy install, uses no power until tank is full and LED light comes on.
https://www.marinesan.com/DTM01-Probe-Assy-Single-probe-p/313002311.htm
Been working great.
Doug
On Wed, Sep 25, 2019 at 11:37 AM David Ris
Tom,
Check these out from Fisheries Supply.
https://www.fisheriessupply.com/boat-furniture-and-outdoor-living/cockpit-accessories
On Mon, Sep 30, 2019 at 5:28 AM T Smyth via CnC-List
wrote:
> This may seem frivolous but I recognized a serious need for cockpit cup
> holders during a recent outing
Here is an update on my MAX prop. I took it to PYI, the estimate came back
needing the following parts, blades, hub, and all gears. Basically I will
keep my original housing and get a "new" prop out of the deal for 2/3 the
cost of a new prop. I should have it back by the middle of next week.
--
D
Got mine yesterday. at first I thought it was from the USCG, but upon
further inspection I realized it was bogus.
Doug
On Wed, Oct 9, 2019 at 5:49 PM Matthew L. Wolford via CnC-List <
cnc-list@cnc-list.com> wrote:
> Listers:
>
> FYI, I just received a notice from the “Vessel Documentation Po
Derek,
Sounds like your fuel filters are plugged.
here is a good video of changing your fuel filters and bleeding the fuel
system. Its not a hard job, but it can be a bit messy. have lots of oil
diapers on hand.
https://www.youtube.com/watch?v=ub0zfW42mVo
Doug
On Thu, Oct 17, 2019 at 9:02 AM Der
HI Brian,
I had a LF38 (hull #4) with the same issues you're complaining about.
Inefficiency while motoring, almost non-existence reverse. I installed a
fixed pitch 3 blade prop. While it did help with motoring, reverse was not
much better. On my new (to me) LF39, which came with a max prop. All I
It's bad to start the engine with a battery charger connected? Been doing
it for 25 years and never had a charger fail.
Doug
On Wed, Oct 30, 2019 at 8:02 AM Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:
> I also do it all the time and have never had a problem.
>
> Whey your engine st
Edd,
try sure marine in seattle.
https://www.suremarineservice.com/Galley/Force-10/
Doug Mountjoy
On Tue, Dec 10, 2019 at 9:13 AM Edd Schillay via CnC-List <
cnc-list@cnc-list.com> wrote:
> Listers,
>
> Anyone know a good source for Force 10 stove parts?
>
> I’m looking for the sliding piece of m
Bruce,
I put my sensor on the floor of the galley opposite the stove. above the
sensor is the propane control panel, so it is handy when using the stove. I
have been thinking of adding another control for the propane fireplace.
IF the supply hose is properly supported by clamps there should be very
Dave, The red wire that's interconnected with each fuse holder is the hot
(supply). the wires coming off The top are to each individual cuircut. the
green wire is for the cuircut controlled by that fuse. Tried to get you a
simple schematic, but can't figure out how on my phone. Hope that helps.
Will, I'm not sure how the oven works, but I have a complete oven/stove I'm
willing to let go for next to nothing. Tired of storing it. It is off my 1988
LF. Doug Mountjoysv Rebecca Leah C&C Landfall 39Port Orchard yacht club
Original message From: Will Gerstmyer via CnC-List
D
My USCG number is in the lazzerette. They are etched into a piece of wood
glasses to the hull. Doug Mountjoysv Rebecca Leah C&C Landfall 39Port Orchard
yacht club
Original message From: David Knecht via CnC-List
Date: 3/19/20 12:05 (GMT-08:00) To: CnC discussion
list CnC Cc
Could you use a couple of stanchion bases, a short piese of tubing, and if
necessary a piece of either starboard or G10 to mount the light on? Just a
thought. DougDoug Mountjoysv Rebecca Leah C&C Landfall 39Port Orchard yacht club
Original message From: David Knecht via CnC-List
I was sailing to Hawaii on a 1973 Ericsson 35. We snapped a rudder cable twice
in 24 hours, and had to use the e-tiller. Worked great, except for the compass
being mounted behind the rudder post. On that boat the binnacle is mounted
behind the rudder post. When the first cable snapped, on my wa
com/technical/hillerange_stove/Jim WattsParadigm
ShiftC&C 35 Mk IIIVictoria, BCOn Fri, 13 Mar 2020 at 11:03, Doug Mountjoy via
CnC-List wrote:Will, I'm not sure how the oven works,
but I have a complete oven/stove I'm willing to let go for next to nothing.
Tired of storing it. It is off my 1988
Thankfully the govenor hasen't gone totally bonkers. Here on Puget sound, they
have yet to close any marina, although they did close the marine state park
docks to overnight moorage. Our YC did cancel all activities until at least
may. Doug Mountjoysv Rebecca Leah C&C Landfall 39Port Orchard yac
Mine wasn't. Thank God. Doug Mountjoysv Rebecca Leah C&C Landfall 39Port
Orchard yacht club
Original message From: "Dennis C. via CnC-List"
Date: 3/28/20 17:17 (GMT-08:00) To: CnClist
Cc: "Dennis C." Subject: Stus-List
Seattle Marina fire Hopefully no listers boat(s) are i
A yacht policy will include the EPA spill coverage. We are going through at my
YC. Not sure if a liability only policy will include the required coverage. It
is around $933k. You also want to have your marina listed as the "also insured"
.Hope this helps. Doug Mountjoysv Rebecca Leah C&C Landfal
Bruce, Rebecca Leah has 2 racor 500 filters, I can use them in parallel, or
singly. I have an electric fuel pump that will supply the engine, should the
boost pump fail. I am also able to transfer fuel between my 3 tanks, and filter
it at the same time. DougDoug Mountjoysv Rebecca Leah C&C Landf
Most sea water pumps can be rebuilt, new bearings, seals. I did my yanmar pump
for about 1/2 of new. Doug Mountjoysv Rebecca Leah C&C Landfall 39Port Orchard
yacht club
null___
Thanks everyone for supporting this list with your contributions. Each an
Nathan,When I installed an additional conduit in my mast. I blocked the spar so
the conduit would lay in the low part. Gravity is your friend. I then drilled a
3/16 hole thru the conduit and mast, used a hook to hold it in place drilled a
second hole about an inch away. Installed pop rivet in th
Run them down the outside of the guard and wrap them in macrame.
On Tue, Apr 21, 2020 at 10:52 AM Edd Schillay via CnC-List <
cnc-list@cnc-list.com> wrote:
> Listers,
>
> I’m considering adding an instrument pod and a larger pedestal guard to
> the Enterprise, preferably something big enough to
Dave, For what it's worth, my CB's on my panel are not labeled either. Short
one out momentarily and see if it pops. If it pops question answered, if it
doesn't and continuity is interrupted, well now you have another question to
answer. I spent quite awhile looking for fuses for my old Battery
Matt, Not sure about the Westerbeke, but my yanmar had a quick connect plug to
allow removal of the panel. Or install a longerCable between the engine and
panel. A friends volvo also has a plug to disconnect engine and panel. Doug
Mountjoysv Rebecca Leah C&C Landfall 39Port Orchard yacht club
--
Jon, On my 39 I went with the Isotherm. Being a live aboard in the Pacific NW,
and 30 amps of power. I find the Isotherm and my 2 space heaters will all run
at the same time. The Isotherm is 750 watts, all the other units were 1000-1200
watts. I've never run out of hot water, 8gal unit, and it o
I need help. I spilled epoxy resin on my brand new upholstery, and it went
unnoticed for several days, so it has soaked into the new foam also. The
area is about 6 sq inches. My question is what do I use to remove the resin
with out damaging the foam?
I am not to worried about the fabric as I sewed
Thanks Graham, Didn't think of that. Doug Mountjoysv Rebecca Leah C&C Landfall
39Port Orchard yacht club
Original message From: Graham Collins via CnC-List
Date: 5/11/20 17:23 (GMT-08:00) To: Doug Mountjoy via
CnC-List Cc: Graham Collins
Subject: Re: Stus-Lis
Generally there are 2 ports on the engine for plumbing in another heat
exchanger. Whether it is for a heater or in this case, a water heater. These
are in addition to the ones that run to the cooling heat exchanger. Doug
Mountjoysv Rebecca Leah C&C Landfall 39Port Orchard yacht club
Ori
David,The purpose of helicoils is to repair threads in a hole, so you can use
the same size faster. Are your fasteners stripped or the threads in the hole?
Where on your curler are the threads damaged? Doug Mountjoysv Rebecca Leah C&C
Landfall 39Port Orchard yacht club
Original message
My Landfall 39 has 2 showers. Plus an added one in the cockpit. Doug Mountjoysv
Rebecca Leah C&C Landfall 39Port Orchard yacht club
Original message From: "Della Barba, Joe via CnC-List"
Date: 5/15/20 08:40 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: "Della Barba, Joe" Subject
emoving the epoxy resin from your upholstery?
>
> Rob Abbott
> AZURA
> C&C 32 - #277
> Halifax, N.S.
>
> On 5/11/2020 8:41 PM, Doug Mountjoy via CnC-List wrote:
>
> I need help. I spilled epoxy resin on my brand new upholstery, and it went
> unnoticed for several day
Dave, I have done the flush window replacement. Let me know if you need
help.Doug Mountjoysv Rebecca Leah C&C Landfall 39Port Orchard yacht club
Original message From: Dave S via CnC-List
Date: 5/18/20 16:58 (GMT-08:00) To: C&c Stus List
Cc: Dave S Subject: Stus-List 33-2
John, When I did this on my LF38. I ended up pulling the V-drive and pulled the
shaft out into the aft cabin. The hardest part was getting the prop off. Doug
Mountjoysv Rebecca Leah C&C Landfall 39Port Orchard yacht club
Original message From: John Christopher via CnC-List
Date
Joe,
2 years ago I had my rod rigging replaced plus a bunch of other repairs
done to my mast and boom. Total cost was $18k. Mast was pulled, inspected,
rewired, new rods, new furler on for stay, new staysail stay, new goose
neck. I added a second main halyard block. Back stay had insolators for SSB
I would be interested in it. Doug Mountjoysv Rebecca Leah C&C Landfall 39Port
Orchard yacht club
Original message From: John Conklin via CnC-List
Date: 5/23/20 08:45 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: John Conklin Subject:
Stus-List Force 10 heater removal Ok I had a
Rob,
I have had 2 of these water heaters in 2 boats. Love them for the low power
draw on shore power, Being a live aboard on 30 amps this is important in
the winter.
https://www.fisheriessupply.com/isotherm-spa-water-heaters
On my LF38 I had the 6.5 gal and on my LF39 I have the 8 gal.
On Tue, May
Gerry,
When pressing in a new lip seal there are a couple of things to look for.
first make sure the seal is orientated correctly, the open side (side with
spring) should face the liquid
second I use a socket that covers the seal completely, I invert the socket
and then insert an extension and driv
I got my replacement Leds from Paneltronics. Theirs are a larger diameter than
Blueseas. They fit the holes in my panels. Doug Mountjoysv Rebecca Leah C&C
Landfall 39Port Orchard yacht club
Original message From: John Conklin via CnC-List
Date: 5/30/20 19:32 (GMT-08:00) To:
Josh, I used to work in a machine shop where I had to remove gears off of
shafts. We used an acetylene torch to heat the gear fast, so the shaft didn't
expand as fast. Using a slow heat source will heat the coupling and shaft at
about the same rate. You want to expand the coupling faster than th
I would give it a try. I have never used Mapp gas. You will want to use as
hot of flame as possible.
On Mon, Jun 1, 2020 at 8:21 AM Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:
> You think Map gas will be good enough?
>
> On Mon, Jun 1, 2020, 11:17 Doug Mountjoy via C
David,
You have a circulating pump usually driven by a belt off of the crank
pulley, also this belt drives the alternator. This pump usually doesn't
require any maintenance. There is a weep hole below the shaft to signal
when a seal has failed. There is a thermostat that controls the temperature
o
HI All,
The other day while motoring at about 6.5kts we noticed an intermittent
thumping near the stern. It sounded like a crab float was bouncing off of
the hull. we slowed and the noise became quieter. Thinking there was
actually something thumping on the hull we came to a complete stop and even
I would keep the shaft log as long as possible. Only cut off the bare
minimum.
On Tue, Jun 16, 2020 at 6:02 AM Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:
> I've asked a few of you personally so if this is a repeat then please
> disregard.
>
> I'm in the process of replacing/rebuild
HI All,
Thanks for the comments. There are some things I am definitely going to
check next time out. I don't have a strut, and the noise is random. I had
the prop overhauled in Dec. Not sure if the Max prop blades will stick. I
noticed yesterday that I am going to have to haul out for new bottom pa
Thanks Dave, I didn't think about the transmission slipping. Doug Mountjoysv
Rebecca Leah C&C Landfall 39Port Orchard yacht club
null___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If y
Being a live aboard, I have to defrost my freezer plates every other month. The
fridge life is well sealed, but constant opening causes frost to build up. Doug
Mountjoysv Rebecca Leah C&C Landfall 39Port Orchard yacht club
Original message From: "Dennis C. via CnC-List"
Date: 6
Black smoke from a diesel is usually an indication the engine is loaded up. ie.
Pulling hard. It could also mean your injectors and or injection pump need
overhaul. Doug Mountjoysv Rebecca Leah C&C Landfall 39Port Orchard yacht club
Original message From: Peter Cowenhoven via CnC
I motor at 2500 for 6.5-6.9kts. I can go faster but why burn the fuel.
Doug
On Tue, Jun 23, 2020 at 9:53 AM Rob Hamlin via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hi
> What is everyone’s motor/ rpm optimal motoring speed?
>
> Thanks
> Rob
>
>
>
> Sent from my iPhone
> _
Hi Eric,
I just emailed Whitecap Industries (they make teak handrails) about making
handrails with a 12 inch center. They make them with 10 5/16 centers.
I will let you know what they say.
Doug
On Tue, Jun 23, 2020 at 9:09 AM Eric Templeton via CnC-List <
cnc-list@cnc-list.com> wrote:
> Looking f
Hi Joe,
I just replaced the plexiglass on 2 of my hatches. I dug out most of the
sealant around the lens, then took a windshield removal tool to cut the
bond between the frame and lens. I used a wire wheel to clean up the
remainder of sealant. Wiped the frame with lacquer thinner, put a small
bevel
I did the hatch in place. Just sat on the deck with my legs hanging into
the cabin.
On Wed, Jun 24, 2020 at 9:16 AM Joe Della Barba via CnC-List <
cnc-list@cnc-list.com> wrote:
> How did you get the hinge pins out??
>
>
> Joe
> On 6/24/2020 11:54 AM, Doug Mountjoy via CnC-L
wrote:
> I hope you used the primer for the Sikaflex. First time I did not and the
> thing leaked inside of 2 years. Cleaned it up all over agsin and used
> primer second time. Still good after 5 years no leaks. The primer made the
> difference
>
> On Wed, Jun 24, 2020 at 12:54 PM
When filling holes with thickened epoxy be sure holes are countersunk. This
presents cracking around the hole. Doug Mountjoysv Rebecca Leah C&C Landfall
39Port Orchard yacht club
null___
Thanks everyone for supporting this list with your contributions.
Check the nipple going into your tank. Could be clogged . Doug Mountjoysv
Rebecca Leah C&C Landfall 39Port Orchard yacht club
null___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you
What are the dimensions foot and luff? My girlfriend is looking for a good used
main for her Sun 27. Doug Mountjoysv Rebecca Leah C&C Landfall 39Port Orchard
yacht club
null___
Thanks everyone for supporting this list with your contributions. Each and
I replaced my hillerange with a Dickenson Mediterranean. Found it at a
secondhand store for 1/2 price, it looked brand new. Doug Mountjoysv Rebecca
Leah C&C Landfall 39Port Orchard yacht club
Original message From: Brian Davis via CnC-List
Date: 7/9/20 08:04 (GMT-07:00) To:
I'm almost 63. But I act 24. 😎Doug Mountjoysv Rebecca Leah C&C Landfall 39Port
Orchard yacht club
null___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - u
Marinebeam.com you can get replacement LED tubes that fit in place of the
florescent ones.
Doug
On Sun, Jun 9, 2019 at 6:11 AM David Risch via CnC-List <
cnc-list@cnc-list.com> wrote:
> All,
>
>
>
> Finally getting around to replacing the fluorescent overhead rectangular
> lights in the main c
Gladvyou came out alright, and everyone is ok. Sent from my T-Mobile 4G LTE
DeviceDoug MountjoyPort Orchard YCPort Orchard, WAsv Rebecca Leah1988 C&C LF39
Original message From: "Dennis C. via CnC-List"
Date: 8/1/21 6:50 PM (GMT-08:00) To: Stus-List
Cc: "Dennis C." Subjec
Thats a good one.I'm madly preparing for my departure from the PNW for my trip
down the west coast to participate in the 2021 BAJA HA-HA. and follow in the
"foot steps" of Wally. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort
Orchard YCPort Orchard, WAsv Rebecca Leah1988 C&C LF39
---
1 - 100 of 238 matches
Mail list logo
