Gerry, When pressing in a new lip seal there are a couple of things to look for. first make sure the seal is orientated correctly, the open side (side with spring) should face the liquid second I use a socket that covers the seal completely, I invert the socket and then insert an extension and drive the seal in carefully trying to make sure it goes in straight. Lubricate the shaft before installing into the new seal. https://www.youtube.com/watch?v=8Bh9I2E7HGI
On Wed, May 27, 2020 at 12:36 PM Gerald Fennessey via CnC-List < cnc-list@cnc-list.com> wrote: > Any one have experience pressing in a new seal > in the 3gm raw water pump. > > Thanks > > Gerry > Fianna 1985 35 MK3 > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > -- Douglas Mountjoy 253-208-1412 Port Orchard YC, WA Rebecca Leah C&C LandFall 39
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
