Thanks, Leslie
On Tue, 8/11/15, Josh Muckley via CnC-List wrote:
Subject: Re: Stus-List Yanmar question
To: "C&C List"
Cc: "Josh Muckley"
Date: Tuesday, August 11, 2015, 11:28 AM
Yes it
should rotate. I think mine
Yes it should rotate. I think mine is held on with a cotter pin or a clip.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
Yanmar 3HM35F
On Aug 11, 2015 2:25 PM, "Leslie Paal via CnC-List"
wrote:
> The "kill" cable broke on my 2GM20, at the engine end. The cause (I
> think) was that as the
The "kill" cable broke on my 2GM20, at the engine end. The cause (I think) was
that as the arm moved the wire was flexing where it was clamped to the arm. My
question: should that clamp (square block of metal with a hole for the wire and
a screw to clamp) rotate in the arm. Mine does not. Ca
Gravity ... its everywhere !
Tim
From: cnc-list-boun...@cnc-list.com
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of jim aridas
Sent: Thursday, September 20, 2012 11:02 AM
To: cnc-list
Subject: Re: Stus-List Yanmar question
Jake might take you up on this. First need to
n with the mask an fins.Ahh the finer moments in a
boater's life.Should of drank like a pirate yesterday instead of just talking
like one!
From: captain_j...@cox.net
To: cnc-list@cnc-list.com
Date: Wed, 19 Sep 2012 18:32:49 -0400
Subject: Re: Stus-List Yanmar question
Jim, I went with a
> Martin
> From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On
> Behalf Of Dennis C.
> Sent: Wednesday, September 19, 2012 5:47 PM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Yanmar question
>
> Probably sounds more like a 1998 Honda Civi
is C.
Sent: Wednesday, September 19, 2012 5:47 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
Probably sounds more like a 1998 Honda Civic with a varoom varoom exhaust and a
loud stereo. :)
Arrgh!! And so ends National Talk Like A Pirate Day, September 19.
Dennis C.
To
"cnc-list@cnc-list.com"
>Sent: Wednesday, September 19, 2012 6:22 PM
>Subject: Re: Stus-List Yanmar question
>
>
>Jake, does it have that GMC diesel sound?
>
>
>Rich Knowles
>Indigo. LF38
>Halifax
>
>On 2012-09-19, at 19:32, "Jake Brodersen" w
, 2012 7:22 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
Jake, does it have that GMC diesel sound?
Rich Knowles
Indigo. LF38
Halifax
On 2012-09-19, at 19:32, "Jake Brodersen" wrote:
Jim,
I went with a very small Vernalift muffler. It is fiberglass and s
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On
Behalf Of jim aridas
Sent: Wednesday, September 19, 2012 9:08 AM
To: cnc-list
Subject: Re: Stus-List Yanmar question
Follow up to my loud hissing sounding exhaust. Raw water system good, flow at
end of heat excha
Sent: Wednesday, September 19, 2012 9:08 AM
To: cnc-list
Subject: Re: Stus-List Yanmar question
Follow up to my loud hissing sounding exhaust. Raw water system good, flow
at end of heat exchanger going into the mixing elbow strong. Looked inside
of mixing elbow, no blockage(aided by flexible fiber o
eyo...@deyoungmfg.com>
Calypso
1971 C&C 43
Seattle
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On
Behalf Of jim aridas
Sent: Wednesday, September 19, 2012 6:08 AM
To: cnc-list
Subject: Re: Stus-List Yanmar question
Follow up
c-list.com [mailto:cnc-list-boun...@cnc-list.com]
On Behalf Of Tim Goodyear
Sent: Wednesday, September 19, 2012 10:10 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
I installed a Vetus muffler a couple of years back on Mojito when the
original one started leaking. It turned
st a thought,
Mike
VIRGINIA LEE C&C 36 CB
Virginia Beach, VA
-Original Message-
From: jim aridas
To: cnc-list
Sent: Wed, Sep 19, 2012 9:14 am
Subject: Re: Stus-List Yanmar question
Joel,
Wouldn't I see leakage(water) at the clamp? Hoses are dry. Are you
thinking its sucking
He he)Jim
Date: Wed, 19 Sep 2012 09:22:24 -0400
From: joel.aron...@gmail.com
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
If the break is on the top side of the hose exhaust could be leaking into the
bilge. If your hose is original you might want to replace it now while one e
see leakage(water) at the clamp? Hoses are dry. Are you
> thinking its sucking in air?
> Jim
>
> --
> Date: Wed, 19 Sep 2012 09:11:53 -0400
> From: joel.aron...@gmail.com
>
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Yanmar question
&g
Joel,Wouldn't I see leakage(water) at the clamp? Hoses are dry. Are you
thinking its sucking in air?Jim
Date: Wed, 19 Sep 2012 09:11:53 -0400
From: joel.aron...@gmail.com
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
Jim,
You might check the exhaust hose carefully. A
The composite material works best and last much longer.
In a message dated 9/19/2012 9:11:57 A.M. Eastern Daylight Time,
joel.aron...@gmail.com writes:
Jim,
You might check the exhaust hose carefully. A small break around the
clamp might give the same symptoms, and I bet it is a cheap
Jim,
You might check the exhaust hose carefully. A small break around the clamp
might give the same symptoms, and I bet it is a cheaper repair (if you can
crawl in there).
Joel
On Wed, Sep 19, 2012 at 9:08 AM, jim aridas wrote:
> Follow up to my loud hissing sounding exhaust. Raw water syste
Follow up to my loud hissing sounding exhaust. Raw water system good, flow at
end of heat exchanger going into the mixing elbow strong. Looked inside of
mixing elbow, no blockage(aided by flexible fiber optic scope). I didn't want
to run the engine with exhaust hose off of the elbow. figured it
"FORE"
From: f...@postaudio.net
Date: Tue, 11 Sep 2012 15:55:01 -0500
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
Probably came off one of those cruise ships with a practice tee on the stern...
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) --
Probably came off one of those cruise ships with a practice tee on the stern...
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^(
On Sep 11, 2012, at 3:26 PM, Martin DeYoung wrote:
> On a 1980 C&C 36 with a Yanmar engine I experienced a cooling wa
012 12:53 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
Earlier someone recommended a thorough check for clogs in the system first.
I would second that advice.
Thought I had an elbow or water injector problem once but it turned out to be a
partial sea water clog that was
2 2:53 PM
>Subject: Re: Stus-List Yanmar question
>
>
>
>Earlier
someone recommended a thorough check for clogs in the system
first.
>I would
second that advice.
>Thought I had
an elbow or water injector problem once but it turned out to be a partial
sea water clog that w
e Thomas
C&C27 MKIII
-Original Message-
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com]On
Behalf Of jim aridas
Sent: Tuesday, September 11, 2012 3:31 PM
To: capt...@yahoo.com; cnc-list
Subject: Re: Stus-List Yanmar question
Humm, knew we would get at l
n, 10 Sep 2012 20:11:19 -0700
From: capt...@yahoo.com
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
Jake wrote:
"I always check the nipples first!"
I'm a leg man myself.
Dennis C.
From: Jake Brodersen
To: cnc-list@cnc-list.com
Sent: Monday, Septem
Jake wrote:
"I always check the nipples first!"
I'm a leg man myself.
Dennis C.
>
> From: Jake Brodersen
>To: cnc-list@cnc-list.com
>Sent: Monday, September 10, 2012 7:06 PM
>Subject: Re: Stus-List Yanmar question
aridas
Sent: Monday, September 10, 2012 9:33 AM
To: cnc-list
Subject: Re: Stus-List Yanmar question
Engine question. Have a Yanmar 3GMF20. Noticed this weekend the exhaust
started sounding "like its hissing or more air with the water". Last few
weeks it sounded a little different, but thoug
-list.com] On
Behalf Of David Blair
Sent: Monday, September 10, 2012 11:49 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
I had that sound when there was plugging with a ½ cup of assorted seaweed - it
lodged in the right angle connection before the strainer. Am planning to
AM
To: cnc-list
Subject: Re: Stus-List Yanmar question
Engine question. Have a Yanmar 3GMF20. Noticed this weekend the exhaust
started sounding "like its hissing or more air with the water". Last few
weeks it sounded a little different, but thought that since my slip changed
at the ya
Sent mine to a radiator shop and even they failed to remove all of the
exhaust deposits. Save some time, trouble & money and just replace with
newand don't go cheap, replace the stainless steel coupler as well.
In a message dated 9/10/2012 9:39:51 A.M. Eastern Daylight Time,
joel.aron
I've read that the elbow can be removed and soaked in muriatic acid to
dissolve the clog. Has anyone tried it?
If you remove the hose leading into the elbow and measure the water flow
and then measure it (or guesstimate) at the exhaust and there is a
difference, it is the elbow or the nipple into
Exhaust mixing elbow should be replaced, mine did the same in August and
the EME was the culprit..
In a message dated 9/10/2012 9:32:38 A.M. Eastern Daylight Time,
jarid...@msn.com writes:
Engine question. Have a Yanmar 3GMF20. Noticed this weekend the exhaust
started sounding "like it
Engine question. Have a Yanmar 3GMF20. Noticed this weekend the exhaust started
sounding "like its hissing or more air with the water". Last few weeks it
sounded a little different, but thought that since my slip changed at the yacht
club I back up close to a bulk head and possibly just more so
34 matches
Mail list logo
