Probably sounds more like a 1998 Honda Civic with a varoom varoom exhaust and a 
loud stereo.  :)

Arrrrrrgh!!  And so ends National Talk Like A Pirate Day, September 19.

Dennis C.
Touche' 35-1 #83
Mandeville, LA





>________________________________
> From: Rich Knowles <r...@sailpower.ca>
>To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> 
>Sent: Wednesday, September 19, 2012 6:22 PM
>Subject: Re: Stus-List Yanmar question
> 
>
>Jake, does it have that GMC diesel sound?
>
>
>Rich Knowles
>Indigo. LF38
>Halifax
>
>On 2012-09-19, at 19:32, "Jake Brodersen" <captain_j...@cox.net> wrote:
>
>
>Jim,
> 
>I went with a very small Vernalift muffler.  It is fiberglass and should last 
>the life of the boat.  It is quiet, but has a nice warm note to it as well.  
>It’s a mellow sound that is pleasing to my ear.
> 
>I’ve run my engine without the muffler attached.  It may smoke a little bit, 
>but what’s worse is the salt spray that it throws everywhere.  I don’t 
>recommend it.
> 
>Jake
> 
> 
>Jake Brodersen
>C&C 35 Mk-III
>"Midnight Mistress
>Hampton VA
> 
> 
> 
>From:cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On 
>Behalf Of jim aridas
>Sent: Wednesday, September 19, 2012 9:08 AM
>To: cnc-list
>Subject: Re: Stus-List Yanmar question
> 
>Follow up to my loud hissing sounding exhaust. Raw water system good, flow at 
>end of heat exchanger going into the mixing elbow strong. Looked inside of 
>mixing elbow, no blockage(aided by flexible fiber optic scope). I didn't want 
>to run the engine with exhaust hose off of the elbow. figured it would make a 
>sooty kind of mess in the engine compartment. So I've decided the lift muffler 
>must be the culprit. Outside jacket showing some spots that look like its 
>rusting thru from the inside out. Perhaps inside baffling is deteriorating and 
>causing blockage? In any event looks like a potential fill the boat with water 
>issue. As I stated earlier the engine runs ok, no overheat condition, didn't 
>really notice lack of power.
>Any other thoughts? Looks like Defender has some good prices on veralift 
>units. They also have a Vetus model twice the price looks like its a composite 
>material.
>Listers any experience with either?
>Thanks as always.
>Jim
>Galaxy 34'
>Brielle NJ
> 
> 
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to