Jim, Do you have the dimensions of the Veralift unit that fits your engine/space? I have a used one from Calypso that that I changed out to re-rout the exhaust hoses and looks to be in good condition.
If you want it I will ship it out at no cost. Martin mdeyo...@deyoungmfg.com<mailto:mdeyo...@deyoungmfg.com> Calypso 1971 C&C 43 Seattle ________________________________ From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of jim aridas Sent: Wednesday, September 19, 2012 6:08 AM To: cnc-list Subject: Re: Stus-List Yanmar question Follow up to my loud hissing sounding exhaust. Raw water system good, flow at end of heat exchanger going into the mixing elbow strong. Looked inside of mixing elbow, no blockage(aided by flexible fiber optic scope). I didn't want to run the engine with exhaust hose off of the elbow. figured it would make a sooty kind of mess in the engine compartment. So I've decided the lift muffler must be the culprit. Outside jacket showing some spots that look like its rusting thru from the inside out. Perhaps inside baffling is deteriorating and causing blockage? In any event looks like a potential fill the boat with water issue. As I stated earlier the engine runs ok, no overheat condition, didn't really notice lack of power. Any other thoughts? Looks like Defender has some good prices on veralift units. They also have a Vetus model twice the price looks like its a composite material. Listers any experience with either? Thanks as always. Jim Galaxy 34' Brielle NJ
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
