Here are some ideas to incorporate soft shackles into a halyard instead of a
metal shackle if you worry about weight aloft.
https://l-36.com/soft_shackles.php
Aug 4, 2025 11:46:55 Richard Bush via CnC-List :
> I actually prefer the knot over the splice because it prevents the halyard
> from g
I use a knot. The fat splice makes the last foot of hoist more difficult when
you are already fighting the entire weight of the sail.
This is what I sent to our lister Oden who's rebuilding the 37R
>
>> I do what I've seen called a double overhand on itself. The amount of line
>> required t
I used this. I'm happy. It's just a series of resistors and magnetic reed
switches. The gage moves in steps but it is accurate enough.
https://www.amazon.com/gp/aw/d/B08RBLDQTY?psc=1&ref=ppx_pop_mob_b_asin_title
Josh
Jul 25, 2025 12:37:36 cenelson--- via CnC-List :
> I think my fuel sender h
I have wood blocks that came with the boat. I like the concept of spartite but
the pros don't seem to outweigh the cons. I've had zero problems with my
traditional shims and the spar tape/boot tape that the boat yard used has been
perfect. I even had some canvas made to cover the tape so as t
I tried to share this folder before but I don't think the email went
through on my end. It shows lots of pictures from when I had my mast
rebuilt.
https://drive.google.com/drive/folders/1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm?usp=drive_link
I think Ken has accurately guessed at all of your questions.
This is a random video example of the double nut. She does a pretty good job.
https://youtu.be/HRHWF6JWqko?si=-iCkHyuGNaktHnpZ
For particularly difficult studs where the nut have difficulty locking together
sufficiently to not spin you can us flanged lock nuts pictured in the link
below. The
Typically you would set the angle of the index to that of the no go zone on the
polars. For most casual purposes that is 90°. If/when you want to get into
performance tuning you can climb back up and tweek them... Or use a modern
electronic display in addition. Mine are 90° and I just "have a
Typically you would set the angle of the index to that of the no go zone on the
polars. For most casual purposes that is 90°. If/when you want to get into
performance tuning you can climb back up and tweek them... Or use a modern
electronic display in addition. Mine are 90° and I just "have a
My mast only has one set of check/running back stays. They are made of 1/4"
1x19 wire rope and stop short of the deck at the mast by about 2 feet. At the
deck end there is a eye to which I have 5:1 fiddle blocks with cam cleats and
snap shackles that attach to the toe rail. When the boom or m
The 3/4 height line is for a topping lift on a whisker or spin pole. Mine is
black to match all the control lines for the pole. Really just topping lift
and down haul.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+ (tall mast though)
Solomons, MD
Jun 17, 2025 20:23:43 Languid Refiner via CnC-List :
Here are the pictures from my rebuild.
https://drive.google.com/drive/folders/1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm?usp=drive_link
I have 3 forward halyards and one aft. Center is blue, to match all the rest
of the headsail lines. Outers are red to match the other spinacher linedIt is
on a retain
I have a 3HM35F and it starts quick no matter the temperature outside. I would
suggest that it all comes back to compression.
I think you have a year round problem that is simply manifesting during the
cold.
If the rings are a little sticky or the oil is thick then the cold makes it
worse. If
Dave,
Brian did answer your question when he stated "Water left in low spots,
particularly the muffler."
Next time you have a chance to view the curvature of the hull and compare it to
the exhaust outlet, consider that there is a water lift muffler in between the
engine and the outlet. Yes th
3M VHB Tape 4991, Gray, 1/2 in x 36 yd, 90 Mil https://a.co/d/8wiWk0u
Nov 10, 2024 14:52:51 James Hesketh via CnC-List :
> What is the recommended VHB tape for mounting side windows? Thought I had it
> written down, but can't find it now.
>
> TIA
> Jim
> C&C 26 –– Whisper
> Miami, Fl
>
Consider one continuous line with and alpine butterfly and a soft shackle. I
have a mast mounted whisker pole and a baby stay. The sail never gets stuck
like it did with with bowlines.
https://stingysailor.com/2015/06/27/diy-soft-shackles-for-quick-and-easy-headsail-changes-2/
Josh Muckley
S/
I replaced mine with line as well but, beware. There are sheaves on the mast
and boom that were designed for wire, or wire and rope, or rope alone. You
would be well served to know which you have before changing. I bought all new
sheaves from zephyrworks to properly accommodate my selection o
As I suspected. It does have a compression release or decompression lever(s).
Make sure they are all to the outboard position (45°), not vertical.
https://l-36.com/read_pdf.php?page=11&file=manuals11/200152_Rev1-M20-M30-5416-5421_Technical_Man&title=Universal_Diesel__5416_Technical_Manual
As I suspected. It does have a compression release or decompression lever(s).
Make sure they are all to the outboard position (45°), not vertical.
[cid:eu.faircode.email.13941]
May 18, 2024 03:38:49 Josh Muckley via CnC-List :
> I got "stuck rings" one year after I stored th
I got "stuck rings" one year after I stored the boat in the water. The theory
being that when the engine stops the nature of the intake and exhaust valves is
to stop in a manner in which one or two of the cylinders have both intake and
exhaust not fully seated. As the boat rocks in the water t
The stretch in the line on the traveler is of less significance than that of
the halyards. With an easily adjustable main sheet you can fine tune against
stretch in the traveler. For a stretch irrelevant application like the
traveler, sta-set is a widely available and cost effective product.
I thought the metal shield was for gas vs diesel? Mine has been through 3
surveys during my ownership. No comments.
I'll ask the last surveyor. I'll let you know what he says.
All the best,
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
Apr 26, 2024 17:48:08 ed vanderkruk via CnC-List
Keep and eye on ebay. You can find lots of used parts for the 3HM.
A machinist will probably have ideas about how to get yours to seal. After
exhausting professional options, I'd try employing JB Weld epoxy putty. You
could manufacturer a flat plate to bolt or press in place of the end bell.
Dennis said exactly what I was thinking. I can't think of any time when VMG
shouldn't be the metric. Most boats have polars that are flat or concave
between 170 and 190. As I understand it this is likely because the boat has
more wetted surface area when it is flat in the water. Regardless o
I'm afraid you're gonna have to go digging around inside but I agree that it
sounds like the quadrant (or hydraulic drive arm if equipped) is what stopped
the rudder from dropping further. I'm not familiar with the 37 but on the 37+
the rudder is held up by a stainless bolt with bronze rollers
now hoping that the saltwater won't severely damage the engine.
>
> Douglas Mountjoy
> 1988 C&C LF 39
> Mexico at large
> 1984 Sabre 34
> Port Orchard, WA
>
>
> On Thu, Oct 26, 2023, 23:38 Josh Muckley via CnC-List
> wrote:
>> Water doesn'
Water doesn't have to necessarily back up the exhaust from outside or from
condensation. If, when you're laying the boat up, you don't have sufficient
exhaust pressure to blow out the coolant, it only has to back up the elbow a
short distance. The easiest way for this to happen is to use the d
I was estimating 3000A-hr too. That's 30 group 27 batteries! Not sure you
want to do that.
Most people opt for generators to power the air conditioning overnight. You
only need a small 2kw unit. The little red Hondas are popular for this
purpose. You can set them on the foredeck and run a
https://aeropress.com/
I have 2. Use the gas stove to make hot water in a teapot. It is similar to a
French Press but the coffee is smoother and there are no fines in the bottom of
the cup. It makes expresso shots which I just top up with water. Brew takes
less than 30 seconds and clean up
I had a good time checking out mystic seaport museum and actually didn't plan
enough time. We also skipped over to shelter island and happened to catch the
whaling days celebration. It was fun. There is an awesome sandwich shop in
the center of town.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
So
37+ doesn't have conduits. Well mine didn't
Aug 3, 2023 19:20:04 Doug Mountjoy via CnC-List :
> I'm replacing the cables on my Edson Steering. The chain is in excellent
> condition. But the cables and the conduit showed signs of wear. I can't
> inspect the cables, and once pulled out of the co
hoice.
>
> I even use Shell 15-50 in airplanes now that are right up there with the A4
> for antique tech.
>
> Joe
>
> Coquina
>
> *From:* Josh Muckley via CnC-List
> *Sent:* Tuesday, August 1, 2023 1:55 PM
> *To:* Stus-List
> *Cc:* Josh Muckley
> *Sub
Y'all piqued my interest. The Castrol website is a bit of a pain to find
their motorcycle product specs. Ultimately, I found all of the motorcycle oils
are multi viscosity. So it seems like Castrol is out of the picture. I have
little to no experience with Castrol tech support but can attes
Neil, you're not wrong about the air being relatively clean but everyone
should consider just how small 5 microns is while also remembering the last
time the sound deadening material disintegrated all over the engine
compartment. Its also fascinating the speed at which the bilge gets dirty
on a cl
https://drive.google.com/folderview?id=1mSEt5gP5gauUTnAeS_UILmcaMPhcxxGe
I forget how I made the chart but when I graphed it I was able to check me
work by overlaying the factory provided graph with mine. They match close
enough for my needs.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
I have them. Just gotta find 'em.
On Wed, Jun 15, 2022, 13:57 Edd Schillay via CnC-List
wrote:
> Rob,
>
> I don’t have it in table format, but this may help you out:
>
> https://www.dropbox.com/s/ntlbe5eims3zd4u/37PlusPolars.pdf?dl=0
>
> All the best,
>
> Edd
>
>
> On Jun 15, 2022, at 1:50 PM,
I forget where I came across this guide but it has served me well. I don't
recall needing a crimper.
https://drive.google.com/file/d/0B8pEh5lnvP1yMTRmMzIxYTktMDcxOS00NmMyLTg0ZDQtODg1NjU5N2ZkMGJl/view?usp=drivesdk&resourcekey=0-Hr-2cV_NnRO2_bhpIbiGBw
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomon
Lots of options. You could terminate the 2 ends with the typical
connectors and then use a joiner. You could use you're splicer. Nothing
will ever be as good as the cable was before it was cut. I'd ask the yard
to replace the cable. Period. They broke it, they should fix it...
Correctly.
Jos
I don't know if Brian Fry is still on the list but he lives on his boat(S)
out of Havre De Grace. It is a bit of a stretch up the river but I imagine
the slips are pretty cost effective. I believe he's at Log Pond IIRC?
It's a marina tied to condos. Marine services are not their bread and
butte
The grey pipe is polybutyle (PB) and is marketed as Qest. It is not
particularly resistant to chlorine and I've heard there is/was a class
action lawsuit against the manufacturer. If you like, you can stick to the
original fittings here.
https://mobilehomedepotmi.com/plumbing/qest.html
Josh Muc
I'm not sure about the product you have but I have had extremely good
experience with this line of products. I very much like the way the they
tighten and firmly held. Easy to remove and reinstall too.
https://www.flairit.com/flair-it.php
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On
I'm looking for a recommendation on the best exhaust hose. It appears that
I have gotten my money's worth from the original 30 year old hose. I'm
looking at various silicone options but I'm not sure if I should be going
for corrugated or smooth. All advice appreciated in advance.
Josh Muckley
S
I probably should have been more clear. Consider using green grease.
On Tue, Apr 26, 2022, 07:33 Josh Muckley wrote:
> I installed remote grease fittings.
>
> https://drive.google.com/folderview?id=1nMYjorVEGAQz7qe2yad6Mry6uJxDJOvz
>
>
> Consider using this grease.
>
>
> https://drive.google.co
I installed remote grease fittings.
https://drive.google.com/folderview?id=1nMYjorVEGAQz7qe2yad6Mry6uJxDJOvz
Consider using this grease.
https://drive.google.com/file/d/1K6BjDMRWXsjeenlURzxj1x6x1278iH_c/view?usp=drivesdk
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Mon, Apr 25, 2022
There is a good chance that every rudder in the yard is wet. The biggest
risk is that the web that is welded to the shaft may rust to the point of
failure and the shaft could then rotate in the rudder. Very worst case the
fiberglass would fall away from the shaft.
In the interim the water can fr
Bruce,
I have installed a whisker pole. The link below is a folder for pictures
of the entire mast project. Inside is a folder for the whisker pole.
Forespar makes the telescoping pole with the adjustable T-track fitting and
jaw.
https://drive.google.com/folderview?id=1eSqX7wZP1r77hD84wDmGAQSI0
The existing temperature light is run by a simple dedicated temperature
switch. You would have to tee off the port and add a thermistor. Pipe
fittings are easy and the gates usually come with MIP threaded sensors.
Just add signal wire from the gage to the sensor.
Josh Muckley
S/V Sea Hawk
1989 C
Bob,
Maybe it's something you have to see to understand. Please don't take this
as talking down to you, I'm simply trying to makes sure we are starting
from the same baseline.
VMG (velocity made good) or sometimes CS (course speed) is the speed of
approach to the next way point. If you point di
I'm late to this discussion, sorry. If you have an electric fuel pump it
should be connected before the racor. Suck directly from the tank and as
close to the tank as possible, discharge into the racor. This eliminates
the chance of a vacuum leak in the racor or anywhere else downstream of the
p
A broker might be able to help you find a boat and if you are getting a
loan they can smooth the title, inspection, insurance, and loan process.
If you are comfortable with handling those things yourself then I would
consider foregoing the broker. Especially and specifically if the boat is
local t
Since you have 2, you can wire them in series and use on your 24v system.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Wed, Aug 18, 2021, 13:34 Bill Coleman via CnC-List
wrote:
> Some time ago during a discussion about keeping iceboxes evenly cooled, I
> bought 2 tiny fans, and forgot
All the cabin top lines just get sent down the companionway. They hang
straight and stay relatively untangled. The jib sheets are cut to length
such that they only have a few feet of tail. Never really have too much
problem with just those 2 lines being staged on the cockpit floor or on the
benc
am sure feeding the new
> cable through will be its of fun. Thanks for the thoughts and
> encouragement. Dave
>
> S/V Aries
> 1990 C&C 34+
> New London, CT
>
>
> On Aug 12, 2021, at 3:30 PM, Josh Muckley via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
&g
Dave,
The hardest part about the cable is reeving into the pedestal. The cable
takes on a "set" so getting both ends to pass through the narrow passages
can be a trick. I'd use a long piece of nylon string. Attach each end of
the string to a corresponding end of the cable use tape to secure and
The glass on my forward hatch is pretty badly crazed. Recently I
discovered that the hatch is also leaking around the glass to frame seal.
Two questions. What thickness is the glass? What sealant is used to hold
the glass to the frame?
Thanks
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, M
This is a collection of the resources, tools, and hardware I used to make
my dyneema stuff. For the lifelines I used 1/4" dyneema and made locked
brummel eye splices supported by thimbles. You have to be able to thread
the rope eye through the stanchions THEN install the thimble. Solid
thimbles
I'm a huge fan of dyneema. It is relatively cheap and easy to finish
yourself with few if any special tools. I currently have lifelines,
topping lift, various soft shackles and continuous loops made of dyneema.
No problems. I might reconsider using it for standing rigging but
everything else I'd
Well the melting point of solder is about 460°F and I'm sure the iron gets
hotter than that so who knows what the temp of the bolt got to. I've used
my oven set at minimum (170°) to help cure epoxy when the temperatures are
too cold out side. Worked great.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
I'd get a 1/8 reverse drill bit. Drill hogs make a great product. Heat it
with a soldering iron and then after getting a good center punch on the
remaining stud start the reverse drill. Epoxy will be gooey and should let
it go pretty easy. You could probably get away pretty easily with a butane
Sounds like you are confusing 2 different gelcoat treatments. What you
described would be a reasonable choice for rejuvenating original gelcoat to
a factory shine. Best likelihood of success is the hull sides - the
freeboard above the water and below the rub rail. Typically you would NOT
do that
Lots of owners have installed zerk fittings to grease their rudders.
Careful use of an drill bit followed by an end mill bit through the rudder
shaft tube produce a hole that can be tapped to receive a pipe fitting or
zerk. I added hydraulic hoses to mine so that I can remotely and easily
charge g
Wow, great to hear that 1/4 was still flexible enough.
Josh
On Thu, Jun 17, 2021, 12:31 Alan Liles via CnC-List
wrote:
> I replaced my fixed port lights two years ago. I used 1/4 “extruded
> plexiglas with VHB tape and Dow 795. The plexi had enough flex to
> accommodate the curve of the cabin a
On Mon, Jun 14, 2021, 20:18 Jim Watts via CnC-List
wrote:
> 3/8" is standard, I hope that's a typo. 3/16" is pretty thin...
>
> Jim Watts
> Paradigm Shift
> C&C 35 Mk III
> Victoria, BC
>
>
> On Sun, 13 Jun 2021 at 20:54, Josh Muckley via CnC-List
gt; C&C 35 Mk III
> Victoria, BC
>
>
> On Sun, 13 Jun 2021 at 20:54, Josh Muckley via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> I'm about to buy the plexi for the windows on my boat. Looks like I'm
>> going to have to order it from California
fe413f46808e428828f008d92f1bb54c%7C84df9e7fe9f640afb435%7C1%7C0%7C637592618313497698%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=GGcoOl%2FMwmy7slJldDfVyrZy%2BEBHyPgPaCMNN%2Br4lh8%3D&reserved=0>
> for $105). I
.com%2F8505K733-8505K862%2F&data=04%7C01%7C%7Cfe413f46808e428828f008d92f1bb54c%7C84df9e7fe9f640afb435%7C1%7C0%7C637592618313497698%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=GGcoOl%2FMwmy7slJldDfVyrZy%2BEBHyPgPaCMNN%2Br4
8505K733-8505K862/
> <https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.mcmaster.com%2F8505K733-8505K862%2F&data=04%7C01%7C%7Cfe413f46808e428828f008d92f1bb54c%7C84df9e7fe9f640afb435%7C1%7C0%7C637592618313497698%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV
I'm about to buy the plexi for the windows on my boat. Looks like I'm
going to have to order it from California and the shipping is going to be
ridiculously expensive. $150 for the glass and $130 for the shipping. I'm
pretty sure that a larger sheet and or multiple sheets will be
proportionally
Bill,
As this topic has come up in previous discussions you might find more
answers if you try a search of the archives. That being said (IIRC), Loose
recommends between 10% and 15% of break strength. The owners manuals
typically recommend something to the effect of "visibly slack when broad
rea
I can't recall exactly but if you asked me how much oil I buy in preps for
an oil change I would have said 6 qts without even thinking about it. I
use a hand vacuum pump but can't recall it's capacity. As I recall it was
the larger of the 2 Moeller models at the time when I bought it. The
suctio
Mike, I don't know if it changes anything but ALL of my discharge and
exhaust ports come out under the reverse transom. You can see it in the
video linked below.
https://drive.google.com/file/d/0B8pEh5lnvP1yb1hNSENwOHRaZ1k/view?usp=drivesdk
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On
Yes Ron, double braid is really the only best option. It appears that you
have interpreted the graph in the same manner as I. There are a few other
factors that are going to impact your choice.
I got the Samson XLS dirt cheap for my check stays. I chose it for its
cost first, color second, and
Cracks like that often happen when a water logged rudder freezes in the off
season. Mine was not cracked but it was very saturated. The attached link
shows what was involved when the fiberglass guy did the repairs.
https://drive.google.com/folderview?id=0B8pEh5lnvP1yVUdWUDNxVGFUcDA
Dan Cormier
Ron,
Here's a link to a PS article on line stretch to cost. They wrote the
article to show stretch to cost value. In your case you might be able to
use the inverse and simply look for the stretchy and cheap? I have the
ubiquitous sta-set on my mainsheet and traveller. This was a choice of
conv
I've had very good experience with MEK. Test first.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Wed, Apr 21, 2021, 15:49 Neil Andersen via CnC-List <
cnc-list@cnc-list.com> wrote:
> What solvent should I use to remove the residual adhesive??
>
> Neil
> 1982 C&C 32, FoxFire
> Rock Hal
glass
> tubes exiting the stern.
>
>
>
> Bill Coleman
>
> Entrada, Erie, PA
>
>
>
>
>
>
>
> *From:* Josh Muckley via CnC-List [mailto:cnc-list@cnc-list.com]
> *Sent:* Monday, April 19, 2021 2:31 PM
> *To:* C&C List
> *Cc:* Josh Muc
Hey folks,
Without getting too deep into the details, I'm having a bit of difficulty
finding fittings to plumb my new bilge pumpS overboard. I've envisioned a
solution but it requires use of PVC and glued joints. This throws up some
red flags in my mind but I'm not really sure why or if it is ac
It looks like the "cable conduit" is held to a stabilizing beam with hose
clamps. Am I seeing that correctly? If the conduit has NOT slid in those
hose clamps then you're probably not going to find any luck inside the
pedestal. On the other hand if the conduit has slid in the hose clamps you
may
Wifi Hotspot on my phone. I also have a Ubiquiti Bullet mounted at the top
of my mast which is supposed to pick up wifi. One company markets this
package as a 5 mile wifi. I rarely use it but it does allow me to catch
lots of wifi when I'm in anchorages.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
S
Yep just quiet
On Sun, Apr 4, 2021, 08:01 WILLIAM WALKER via CnC-List <
cnc-list@cnc-list.com> wrote:
> So, I haven't gotten any emails for a couple days. None in spam or
> trash. Is it just quiet?
> Bill Walker
> Thanks to all of the subscribers that contributed to the list to help with
> the
I too have the iSeries tank level monitor from TechEdge. I was even a Beta
tester. Generally I like it. The best thing about it is that you don't
have to penetrate the tank in any way. The second best thing is that it
can be calibrated in 10% capacity increments which allows it to very
accurate
Use a wood screw drilled into the wood plug. As the screw bottoms out it
will pull the plug. Just replace with a new one. Glue in place with wood
glue. Use a sharp knife/chisel to shape and then sand flush.
Stain/seal/oil for finish.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Sun,
I have lots of info for you to consider. However, I am by no means a
professional.
I found that without exception "lemon oils" are mineral oil with added
color and scent. Double check me. I use the SDS to see and compare the
"ingredients" in lots of products. Pure mineral oil is what is recomm
Do some research on the load handling ability of spring hooks and
carabiners. As I recall they are nowhere near as strong as the line to
which they are tied. This has been my hesitation in using them.
Josh
On Fri, Mar 19, 2021, 21:01 Dennis C. via CnC-List
wrote:
> Last week's discussion on m
021, 08:53 John McCrea wrote:
> Josh,
>
>
>
> Impressive. How many coats did he apply?
>
>
>
> *From:* Josh Muckley via CnC-List
> *Sent:* Thursday, March 18, 2021 7:12 PM
> *To:* Stus-List
> *Cc:* Josh Muckley
> *Subject:* Stus-List Re: Barrier Coat.
>
&
s (e.g.,
> https://www.coinsunlimited.ca/circulation-coins/all-canadian-circulation-coins-lots-rolls/1989-Canadian-10-Cent-Bluenose-Brilliant-Uncirculated
> ).
>
>
>
> Marek
>
> Ottawa, ON
>
>
>
> *From:* Josh Muckley via CnC-List
> *Sent:* March 18, 2021 18:49
> *To:*
I had my bottom stripped this past summer. The guy used what can only be
described as a hand held planer to strip the gel-coat and layers of
fiberglass. He relaid 2 layers of fiberglass and then barrier coated it
with a MIL-spec product. MIL-DTL-24441 Ultra High Solids (UHS) by Sherwin
Williams
gt;
>
>
>
> Bill Coleman
>
> Entrada, Erie, PA
>
>
>
>
>
>
>
> *From:* Josh Muckley via CnC-List [mailto:cnc-list@cnc-list.com]
> *Sent:* Thursday, March 18, 2021 10:46 AM
> *Cc:* Stus-List; Josh Muckley
> *Subject:* Stus-List Re: Recommended Mas
This may not exactly be the direction you want to go but I find old laptops
with USB DTV dongles and DVD players to be great options. Pick one with an
available cigarette lighter charge adapter so that you can charge with
12v. I like the Dell latitude series. I have an e6540 that I use as a
dail
989 C&C 37+
Solomons, MD
On Thu, Mar 18, 2021, 10:19 David Swensen wrote:
> Josh, Lets talk about your mast and spreaders. What did you use to paint
> them? They look great.
>
> On Thu, Mar 18, 2021 at 9:54 AM Josh Muckley via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
gt;
>
> On Thu, Mar 18, 2021 at 7:20 AM David Swensen via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Josh, Lets talk about your mast and spreaders. What did you use to paint
>> them? They look great.
>>
>> On Thu, Mar 18, 2021 at 9:54 AM Josh Muckley via
I replaced my Aqua Signal with the marine beam. Perfect replacement fit.
No problem. Highly recommend. I also did Aqua Signal LEDs on the
spreaders. Very low profile and they work phenomenally - almost too bright!
https://store.marinebeam.com/led-masthead-foredeck-combination-light/
https://d
Absolutely Bruce! That's great anecdotal evidence of how little of an
adjustment impacts the helm. You're also right that the weather helm VS
Lee helm is ultimately what you are trying to adjust. Remember that slight
weather helm is desirable as Lee helm can actually be dangerous since the
boat
Peter,
What is the chemistry of your existing batteries? Different chemistries
and designs require different charging profiles. How do you plan to keep
it charged? The means of charging has to be matched to the chemistry. Be
careful in your selection of a battery since marine and AGM batteries
Bob,
In your situation I would say that you will probably not regret keeping the
turnbuckle as loose as possible. Of course if you have to tighten it, it
is not impossible. You should make sure that both halves of the turnbuckle
are equally and fully engaged. Y fully engaged I mean that the en
Rake can (and arguably should) be adjusted by moving the foot of the mast.
This basically helps keep the mast centered in the deck at the partners.
Unfortunately the mast shoe often makes doing this nearly impossible. Of
course changing the forestay length can also be a challenge. Remember that
c
Soft shackle.
https://youtu.be/DSAMR27tnFI
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Wed, Mar 10, 2021, 07:54 Bruce Whitmore via CnC-List <
cnc-list@cnc-list.com> wrote:
> I really like the idea of a soft shackle. Easy and cheap to install, and
> if you still really want something
Depends.
If the existing fairing compound broke loose because of flex at the joint
then more of the same will probably happen in the future. If on the
other hand it just had a poor attachment in the first place and there is no
flex then you'll probably be fine.
If you already have the fairing co
Sitting in the slip... My wifi is connected often enough. I see it as
being similar to many of the smart devices in our homes. I can control my
grill and my Christmas lights anywhere in the world and I currently monitor
my freezer temp remotely. If I lose wifi momentarily or for hours on end
it
gue failure which occurs at
> stresses well below the breaking strength, in which case you can sometimes
> see the "beach marks" as the failure works its way across the section.
>
> Neil Gallagher
> Weatherly 35-1
> Glen Cove, NY
>
>
> On 2/24/2021 8:47 PM, Josh Muc
y prize? Can it be shipped or do I need to pick it
> up/sail it home?
>
> Dennis C.
> Touche' 35-1 #83
> Mandeville, LA
>
> On Tue, Feb 23, 2021 at 9:42 AM Josh Muckley via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Engineering discussion for the
1 - 100 of 2400 matches
Mail list logo
