The existing temperature light is run by a simple dedicated temperature switch. You would have to tee off the port and add a thermistor. Pipe fittings are easy and the gates usually come with MIP threaded sensors. Just add signal wire from the gage to the sensor.
Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Wed, Oct 27, 2021, 13:37 Hoyt, Mike via CnC-List <cnc-list@cnc-list.com> wrote: > Has anyone installed a dedicated temperature gauge on a yanmar engine > similar to 3GM30F? Can it be as simple as attaching to the sender unit > that goes to the idiot light on the control panel? > > > > When a panel alarm goes off I usually shut down the engine immediately and > forget to check which lamp was lit. Would be nice to have a temp gauge for > reference. I do have an oil pressure gauge and would love to have both > > > > Thanks > > > > Mike Persistence > > Haliofax > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
