The 3/4 height line is for a topping lift on a whisker or spin pole. Mine is black to match all the control lines for the pole. Really just topping lift and down haul.
Josh Muckley S/V Sea Hawk 1989 C&C 37+ (tall mast though) Solomons, MD Jun 17, 2025 20:23:43 Languid Refiner via CnC-List <cnc-list@cnc-list.com>: > I also have a rope coming out of the mast about 3/4 of the way up. Would that > be just for a flag or anchor ball, or is it for hoisting another jib? > > -Oden > > On Tue, Jun 17, 2025, 8:12 PM Languid Refiner via CnC-List, > <cnc-list@cnc-list.com> wrote: >> So since there are 2 spinnaker halyards, would I only use one to raise the >> spinnaker and just choose which one to use? Then the other one would be used >> for a foredeck sail swap while the spinnaker is up? Also, would the second >> sail be raised on the furler as well? >> Why is there two different halyards for the spinnaker anyway? >> Thanks for your help, Oden >> >> >> On Tue, Jun 17, 2025, 4:57 PM Paul Fountain, <p...@seasource.ca> wrote: >>> O our 33-ll there’s are 3 forward halyards, 1 centre halyard for the jib, >>> and 2 wing halyards for the spinnaker . You can also use 1 to do a head >>> sail swap …. Foredeck crew needs to be sharp and keep track of the halyards >>> so they don’t get crossed. >>> >>> >>> Get Outlook for iOS[https://aka.ms/o0ukef] >>> ---------------------------------------- >>> *From:* Languid Refiner via CnC-List <cnc-list@cnc-list.com> >>> *Sent:* Tuesday, June 17, 2025 4:36:22 PM >>> *To:* cnc-list@cnc-list.com <cnc-list@cnc-list.com> >>> *Cc:* Languid Refiner <atropho...@gmail.com> >>> *Subject:* Stus-List 37R Mast Project >>> >>> Hi Everyone, >>> >>> We are currently trying to assemble the mast (My son Oden and myself), but >>> we are not exactly sure where everything goes and what everything is for, >>> lol. A lot was disassembled when the boat was trucked from Buffalo and we >>> are familiarizing ourselves with this rig. >>> >>> I have three lines coming out of the top of my mast facing the bow, and I >>> was wondering if anyone knows what they are all for? The one in the middle >>> is for the jib halyard, but I am not sure about the other two. Spinnaker? >>> >>> I am also wondering about the spinnaker setup for this mast. Is there >>> supposed to be a block at the top of the mast for the spinnaker? And does >>> the spinnaker halyard run on the outside of the mast, or does it go through >>> the inside? >>> >>> I can get more photos too and we're back at the boat now. >>> >>> Thanks in advance for any help, >>> >>> Noah and Oden >> Your contributions help pay the fees associated with this list and help to >> keep it active. Please help by making a small contribution using PayPal at: >> https://www.paypal.com/paypalme/stumurray All contributions are greatly >> appreciated.
Your contributions help pay the fees associated with this list and help to keep it active. Please help by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray All contributions are greatly appreciated.
