Canadian Silver coin with a nautical theme and minted the same year as my boat was built.
https://www.ebay.com/itm/Royal-Canadian-Mint-1-Silver-Dollar-MacKenzie-River-Exploration-/333860863439?_trksid=p2349624.m46890.l49292 No not particularly superstitious but I figured for the relatively low cost and low effort this little bit of superstition was worth it. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Thu, Mar 18, 2021, 16:39 Bill Coleman via CnC-List <cnc-list@cnc-list.com> wrote: > Wow, is that a Silver Dollar on your mast step, or just a Looney? You > must be superstitious. > > > > > > Bill Coleman > > Entrada, Erie, PA > > > > > > > > *From:* Josh Muckley via CnC-List [mailto:cnc-list@cnc-list.com] > *Sent:* Thursday, March 18, 2021 10:46 AM > *Cc:* Stus-List; Josh Muckley > *Subject:* Stus-List Re: Recommended Masthead/Deck Light combo > replacement [now mast rebuild] > > > > The yard used awlgrip 2000, pearl gray if I recall correctly. Stripped > all hardware and wiring, welded shut vestigial holes, ground them flat and > then primed and painted. Re-wired, refitted, replaced all rod rigging. > > > > Here is the link to the whole project. > > https://drive.google.com/folderview?id=1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm > > > > I pretty sure the next question is going to be "how much?" > > > > ~1k for each rod and hardware. I have 4 shrouds on each side plus head > and back. 10 total > > > > ~3k for the paint job alone > > > > All said and done it came to roughly 20k > > > > Josh Muckley > > S/V Sea Hawk > > 1989 C&C 37+ > > Solomons, MD > > > > On Thu, Mar 18, 2021, 10:19 David Swensen <ka123dswense...@gmail.com> > wrote: > > Josh, Lets talk about your mast and spreaders. What did you use to paint > them? They look great. > > > > On Thu, Mar 18, 2021 at 9:54 AM Josh Muckley via CnC-List < > cnc-list@cnc-list.com> wrote: > > I replaced my Aqua Signal with the marine beam. Perfect replacement fit. > No problem. Highly recommend. I also did Aqua Signal LEDs on the > spreaders. Very low profile and they work phenomenally - almost too bright! > > > > https://store.marinebeam.com/led-masthead-foredeck-combination-light/ > > > > > https://drive.google.com/file/d/1CdFzOH89I3fwlZeumTcWlLxQGST9Mn_S/view?usp=drivesdk > > > > > https://drive.google.com/file/d/1gIzwa9aDe-08QwoXbRkiSKvJpeaHpOkU/view?usp=drivesdk > > > > > https://drive.google.com/file/d/1ZQiyoFpaXQ5qMJ82CfCZY1GUoUKmx-MM/view?usp=drivesdk > > > > > https://drive.google.com/file/d/1C9XMVAymHLr3240v5wFePlXiVGKJG6VS/view?usp=drivesdk > > > > > > All the best, > > > > Josh Muckley > > S/V Sea Hawk > > 1989 C&C 37+ > > Solomons, MD > > > > > > On Thu, Mar 18, 2021, 08:55 Danny Haughey via CnC-List < > cnc-list@cnc-list.com> wrote: > > Hello all, > > > > I need to replace my masthead (steaming)/Deck Light. The existing Aqua > Signal light doesn't impress me as the deck light lens fell off at some > point and the deck light didn't work. So, Staying away from Aqua Signal. > > > > I've been looking and these light range in price from around $100 all the > way up to well over $500. I've seem Marine Beam, with good reviews, at > about $125 and the Signal Mate, with good reviews at about $450. > > > > I don't want to spend unnecessarily but, I'm leaning toward the Signal > Mate. It was good reputation, been around a while and is supposed to be > well made. Of course the reviews on the Marine beam say they are well > made. There are plenty of bad reviews about the aqua signal. > > > > I was hoping some of you could offer some experiences and advise. > > > > Thanks, > > Danny > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
