Klaus-Peter Schrage schrieb:
> For some time now, I can't get any sound from line in. The mixer
> envy24control shows no signal, neither on the rear input nor on the
> internal one where my tv card is connected. Both inputs are ok in windows.
>
> I can't say when this
For some time now, I can't get any sound from line in. The mixer
envy24control shows no signal, neither on the rear input nor on the
internal one where my tv card is connected. Both inputs are ok in windows.
I can't say when this started because I didn't try line in for some time
now.
Recordin
Frank Barknecht wrote:
This is from the Wiki at http://audacityteam.org/wiki/index.pl?LinuxIssues
Audacity can use ALSA natively if you compile it to use
PortAudio v19 instead of the default, v18. Note that v19 is
still evolving and not as well tested, but it is the only
way that Audacit
I have a Terratec DMX6Fire 2496 card, and I'd like to record radio
broadcasts through line-in which means input channels 3 & 4 on my card.
Using arecord, I can type for example
arecord -D line_in -d 20 -f cd tst.wav
with line_in defined by the following clip in .asoundrc:
#adcdac 3 and 4
pcm.lin
At startup, settings are obviously restored, but whenever I change
anything in envy24control, these are not stored at shutdowwn.
- kernel 2.6.3
- alsa driver version 1.0.2c (supplied with kernel source)
- alsa utilities etc.: 1.0.2
... and before you ask, this is the important portion of my
/etc
Thomas Schubert wrote:
Hi,
I hope someone here can help me. I have tried upgrading to kernel 2.6.x, and
tried to get alsa to work (under 2.6.2 and 2.6.3). The hardware is a notebook
with Intel 82801CA/CAM AC'97 Audio (rev 02) (says lspci). Module intel8x0 is
autodetected by alsaconf. I have t
Martin Braun wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
hi folks,
Preston wrote:
|>>It's not nessessary for 1.x drivers
well, at least it doesn't do any harm (provided you didn't change any
permissions on the audio-devices, because they will be reset), so I
reckon when installing ALSA fo
Jaroslav Kysela wrote:
On Sat, 31 Jan 2004, Klaus-Peter Schrage wrote:
I persistently get the following error:
...
LD sound/pci/ice1712/built-in.o
CC [M] sound/pci/ice1712/ice1712.o
sound/pci/ice1712/ice1712.c: In function `snd_ice1712_create':
sound/pci/ice1712/ice1712.c
I persistently get the following error:
...
LD sound/pci/ice1712/built-in.o
CC [M] sound/pci/ice1712/ice1712.o
sound/pci/ice1712/ice1712.c: In function `snd_ice1712_create':
sound/pci/ice1712/ice1712.c:2448: structure has no member named `dev'
make[3]: *** [sound/pci/ice1712/ice1712.o] Fe
Steffen Sauder wrote:
Klaus-Peter Schrage wrote:
All kinds of "internal" playback (aplay, Alsaplayer, xmms, ...)
produce a periodic, heavily distorted sound on all of the 6 PCM Outs
and 2 S/PDIF Ins, when routed to H/W Out 1/2. It sounds somewhat like
a bad feedback loop.
I h
Klaus-Peter Schrage wrote:
Hardware:
Asus P4B533 MB
Pentium P4 2.00GHz
TerraTec DMX6Fire 24/96
Software:
Redhat 9 with kernel 2.6.0-bk3 + alsa-bk-2003-12-30.patch
Alsa driver 1.0.1, libs etc.: 1.0.0rc2
No Jack or aRts
All kinds of "internal" playback (aplay, Alsaplayer, xmms, ...)
[EMAIL PROTECTED] wrote:
If you used the --dry-run option with both patches, then nothing got
patched at all - only tests have been performed, and you still have the
plain vanilla kernel and the 2.6.0 modules folder. You might also see
that from the Makefile in the upper kernel source directory. I
[EMAIL PROTECTED] wrote:
I thought of that and that's why I reinstall the kernel and I patched it with
the patch from kernel.org, i.e 2.6.0-bk. The problem with that was that the
kernel could not load any module. The reason , I believe, was that the kernel
was 2.6.0-bk but in the /lib/module f
Jaroslav Kysela wrote:
Can you tell me your hardware and software used for tests?
Hardware:
Asus P4B533 MB
Pentium P4 2.00GHz
TerraTec DMX6Fire 24/96
Software:
Redhat 9 with kernel 2.6.0-bk3 + alsa-bk-2003-12-30.patch
Alsa driver 1.0.1, libs etc.: 1.0.0rc2
No Jack or aRts
All kinds of "internal" p
Mark Constable wrote:
FWIW I started with 2.6.0 then patched it up to patch-2.6.0-bk3 and
then applied the original patch linked to by Fredrik (never thought
to look for a newer patch, didn't know that ftp area existed) and
all I got was two small rejects that looked like they were included
in pa
Fredrik Smedberg wrote:
I patched my kernel using:
patch -Np1 -i patch_file
Sorry, but adding the -N option didn't change anything. Here's part of
the output generated by the command
patch --dry-run -Np1 -i ../alsa-bk-2003-12-05.patch
(after a long chain of success/fail messages, when the patch p
Fredrik Smedberg wrote:
Hi! There is a kernel-patch available here:
http://www.alsa-project.org/alsa/ftp/kernel-patches/alsa-bk-2003-12-05.patch.gz
Real foolish question: patch against what source?
I tried this from inside a fresh vanilla linux-2.6.0:
[EMAIL PROTECTED] linux-2.6.0]$ patch --dry-run
Felipe Contreras wrote:
On Sat, Dec 20, 2003 at 08:00:05PM +0100, Klaus-Peter Schrage wrote:
I got alsa working with the new kernel, but there are two questions
remaining:
1. Automatic alsa start:
Unlike with former kernels, the alsa-driver doesn't get loaded
automatically when it is us
I got alsa working with the new kernel, but there are two questions
remaining:
1. Automatic alsa start:
Unlike with former kernels, the alsa-driver doesn't get loaded
automatically when it is used by an application (I have configured the
driver supplied with the kernel source). I have to issue
Pierre Lo Cicero wrote:
Hi,
I'm seaching how can I record with my DMX Fire 24/96.
I'm working on MDK 9.2 with the last kernel multimedia.
The card is good recoagnized by installation and this card sounding
good.
But I'm unable to record from back analog entry nor front analog entry.
If I use alsam
1. Compilation and installation work smoothly, as always.
2. The most obvious change has occurred in envy24control, the control
utility for ice1712 cards: The naming of the controls is now more human
readable (eg 'Line in L' instead of 'H/W in 3'), and there are some new
controls in the hardwar
Since v. 0.9.8, nearly all playback is running at double speed/pitch;
- wav (alsaplayer, aplay, xmms)
- mp3 (alsaplayer, xmms)
- mid (TiMidity).
I never have observed this before with any version of alsa.
My configure options haven't changed for a long time:
$ ./configure --with-cards=ice1712,virmi
Pierre Jarillon wrote:
To run envy24control:
$ envy24control -i 4 -o 4 -s 0
Audacity allow to set the number of channels from 1 to 16
with the menu: File -> Preference
Works fine !
Thanks, Pierre, it was only now that I returned to my computer.
Recording into Audacity really worked somewhat wit
Did anyone succeed in doing so? I want to record from the rear line in
of my Terratec DMX 6Fire 24/96.
In envy24control the input signal shows up in H/W In 3 & 4, but Audacity
only knows /dev/dsp as input device, which as far as I know is connected
to H/W In 1 & 2.
BTW, line-in recording works u
Aaron schrieb:
Hi, All
I recently upgraded my kernel to a planet CCRMA one with win4lin as
well.
When I installed Alsa again from src.rpm and ran /sbin/alsaconf I get
the following messege No supported pnp or pci card found.
Of course I had Alsa working superbly prior to this.
I have a soundblas
Edwin Boersma wrote:
On Saturday 31 May 2003 16:04, Edwin Boersma wrote:
I managed to get my output back, after trying several combinations of
settings. I don't really know what I did actually...
Who can tell me how I can have CD output and XMMS output at the same time on
different channels? Th
William W. Austin wrote:
I had thought of perhaps getting an Audigy platinum (with the easy headphone
access) but ONLY IF it supports soundfont loading/usage better than the SBlive!
does (I already know it will support the 4 speakers + subwoofer setup).
But in reading both the devel and user li
Luke Yelavich wrote:
>Would this change of code allow S/PDIF to work on the DMX 6Fire 24/96?
Now, with the the latest rc8 drivers, libs etc., S/PDIF out works for
me. I can record the card's output into my minidic recorder (Redhat 8.0
with kernel 2.4.20-24.8).
The relevant settings in envy24co
28 matches
Mail list logo
