On Saturday 21 June 2003 07:47 am, Bruce Griffis wrote: > On Saturday 21 June 2003 05:16 am, Bernhard Praschinger wrote: > > Hallo > > > > > The --use-read didn't work. I'm using an EnsonIQ1370 card. When I do a > > > lsmod, I get the following: > > > > [...] > > > > > ------------------------------------------------------- > > > Checking the hardware, Belarc Advisor shows the sound card as a > > > Creative AudioPCI (ES1370), SB PCI (64/128). Hmmmm, does that mean 2 > > > cards? My PC only has one sound card. Anyway - the ens-1370 drivers > > > seem to get the soundcard working in xmms, xine, mplayer, .... > > > > If you use alsa please try recording arecord, else with rec, or if you > > like it grafic programm something like snd. To see if other programms > > can recrod from you sound card. > > > > Maybe some other programm is alreaddy using you sound card. you can > > check that with fuser /dev/dspx where x is the dsp you sound card uses. > > If you have only one sound card x is usually 0. > > > > auf hoffentlich bald, > > > > Berni the Chaos of Woodquarter > > The results were kind of odd! > ** Checked DSP and DSP0 while running XawTV (and hearing sound through > line-out in the WinTV Go! Card ** > [EMAIL PROTECTED] bruce]# fuser /dev/dsp0 > /dev/dsp0: No such file or directory > [EMAIL PROTECTED] bruce]# fuser /dev/sound/dsp0 > /dev/sound/dsp0: No such file or directory > [EMAIL PROTECTED] bruce]# fuser /dev/sound/dsp > [EMAIL PROTECTED] bruce]# fuser /dev/dsp > > ** Next, started up XMMS and listened to MP3 radio ** > [EMAIL PROTECTED] bruce]# fuser /dev/dsp > /dev/dsp: 13026 13027 13028 13029 13030 13031 13032 > [EMAIL PROTECTED] bruce]# fuser /dev/dsp0 > /dev/dsp0: No such file or directory > [EMAIL PROTECTED] bruce]# fuser /dev/sound/dsp > /dev/sound/dsp: 13026 13027 13028 13029 13030 13031 13032 > [EMAIL PROTECTED] bruce]# fuser /dev/sound/dsp0 > /dev/sound/dsp0: No such file or directory > > Don't know how I'm getting sound from WInTV - although the physical > connection is a cable from line out on the WinTV Go card to line in on the > EnsonIQ card, and when playing ZawTV, the sound comes out my speakers > attached to the EnsonIQ card. > > > ------------------------------------------------------- > This SF.Net email is sponsored by: INetU > Attention Web Developers & Consultants: Become An INetU Hosting Partner. > Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! > INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php > _______________________________________________ > Mjpeg-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/mjpeg-users
Sorry for not deleting all above - wanted to make sure I didn't lose stuff. Anyway - I am able to rip tracks off a CD using Grip. Am oalso able to play the tracks back again. Looks like the sound card is fine for recording and playing back. Where should I start looking to make sure I have the sound card set up properly to record in streamer, lavrec and XawTV? Is it somewhere in my bttv setup? Does bttv support Alsa? Should I use OSS? I'm lost at this point. ------------------------------------------------------- This SF.Net email is sponsored by: INetU Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
