Yes, my mistake .. in editing i inadvertently added the -c Here is another log. This is from boot, connecting the Bralliant and running the brlapitest (sending braille key (code=27) several times and then CSRTRK). I restart brltty and send braille key (code=27)
On Fri, Jul 29, 2016 at 11:04 PM, Dave Mielke <d...@mielke.cc> wrote: > [quoted lines by Michael Katzmann on 2016/07/29 at 22:28 -0400] > > >The log file is attached. > > Yes, the log file indeed shows that brltty is trying to use a contraction > table > named -P. > > -- > Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of > God. > Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ > EMail: d...@mielke.cc | Canada K2A 1H7 | http://FamilyRadio.org/ > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: BRLTTY@mielke.cc > For general information, go to: http://mielke.cc/mailman/listinfo/brltty >
2016-07-30@03:36:50.718 [brltty] pushed command environment: initial 2016-07-30@03:36:50.718 [brltty] BRLTTY 5.2dev rev BRLTTY-5.1-794-g565e9b1b [http://brltty.com] 2016-07-30@03:36:50.720 [brltty] program exit event added: pid-file 2016-07-30@03:36:50.721 [brltty] program exit event added: screen-data 2016-07-30@03:36:50.721 [brltty] Working Directory: / 2016-07-30@03:36:50.721 [brltty] Writable Directory: /var/run/brltty 2016-07-30@03:36:50.721 [brltty] Configuration File: /etc/brltty.conf 2016-07-30@03:36:50.721 [brltty] Preferences File: brltty.prefs 2016-07-30@03:36:50.721 [brltty] regions: text=0.0 status=0.0 2016-07-30@03:36:50.721 [brltty] shifts: full=1 half=0 vertical=5 2016-07-30@03:36:50.721 [brltty] Drivers Directory: /lib/brltty 2016-07-30@03:36:50.721 [brltty] Tables Directory: /etc/brltty 2016-07-30@03:36:50.721 [brltty] checking for text table: /etc/brltty/Text/en_GB.ttb 2016-07-30@03:36:50.721 [brltty] compiling text table: /etc/brltty/Text/en_GB.ttb 2016-07-30@03:36:50.722 [brltty] file opened: /etc/brltty/Text/en_GB.ttb fd=4 2016-07-30@03:36:50.722 [brltty] including data file: /etc/brltty/Text/en_GB.ttb 2016-07-30@03:36:50.722 [brltty] file opened: /etc/brltty/Text/ltr-latin.tti fd=5 2016-07-30@03:36:50.722 [brltty] including data file: /etc/brltty/Text/ltr-latin.tti 2016-07-30@03:36:50.735 [brltty] file opened: /etc/brltty/Text/ctl-latin.tti fd=5 2016-07-30@03:36:50.735 [brltty] including data file: /etc/brltty/Text/ctl-latin.tti 2016-07-30@03:36:50.738 [brltty] file opened: /etc/brltty/Text/common.tti fd=5 2016-07-30@03:36:50.738 [brltty] including data file: /etc/brltty/Text/common.tti 2016-07-30@03:36:50.738 [brltty] file opened: /etc/brltty/Text/spaces.tti fd=6 2016-07-30@03:36:50.738 [brltty] including data file: /etc/brltty/Text/spaces.tti 2016-07-30@03:36:50.739 [brltty] file opened: /etc/brltty/Text/boxes.tti fd=6 2016-07-30@03:36:50.739 [brltty] including data file: /etc/brltty/Text/boxes.tti 2016-07-30@03:36:50.741 [brltty] file opened: /etc/brltty/Text/blocks.tti fd=6 2016-07-30@03:36:50.741 [brltty] including data file: /etc/brltty/Text/blocks.tti 2016-07-30@03:36:50.742 [brltty] Text Table: en_GB 2016-07-30@03:36:50.742 [brltty] program exit event added: text-table 2016-07-30@03:36:50.742 [brltty] Attributes Table: left_right 2016-07-30@03:36:50.742 [brltty] program exit event added: attributes-table 2016-07-30@03:36:50.742 [brltty] program exit event added: contraction-table 2016-07-30@03:36:50.742 [brltty] Contraction Table: none 2016-07-30@03:36:50.742 [brltty] Keyboard Property: type= 2016-07-30@03:36:50.742 [brltty] Keyboard Property: vendor= 2016-07-30@03:36:50.742 [brltty] Keyboard Property: product= 2016-07-30@03:36:50.742 [brltty] program exit event added: keyboard-table 2016-07-30@03:36:50.742 [brltty] Keyboard Table: none 2016-07-30@03:36:50.742 [brltty] program exit event added: screen-driver 2016-07-30@03:36:50.742 [brltty] activity action request: screen-driver: start 2016-07-30@03:36:50.742 [brltty] activity state change: screen-driver: 4[preparing] 2016-07-30@03:36:50.742 [brltty] activity state change: screen-driver: 1[prepared] 2016-07-30@03:36:50.742 [brltty] activity state change: screen-driver: 2[scheduled] 2016-07-30@03:36:50.742 [brltty] BrlAPI Server: release 0.6.2 2016-07-30@03:36:50.742 [brltty] API Parameter: auth= 2016-07-30@03:36:50.742 [brltty] API Parameter: host= 2016-07-30@03:36:50.742 [brltty] API Parameter: stacksize= 2016-07-30@03:36:50.743 [brltty] program exit event added: address-table 2016-07-30@03:36:50.743 [brltty] program exit event added: api-server 2016-07-30@03:36:50.743 [brltty] program exit event added: braille-data 2016-07-30@03:36:50.743 [brltty] program exit event added: braille-driver 2016-07-30@03:36:50.743 [brltty] activity action request: braille-driver: start 2016-07-30@03:36:50.743 [brltty] activity state change: braille-driver: 4[preparing] 2016-07-30@03:36:50.743 [brltty] Braille Display Dimensions: 1 row, 1 column 2016-07-30@03:36:50.743 [brltty] regions: text=0.1 status=0.0 2016-07-30@03:36:50.743 [brltty] shifts: full=1 half=0 vertical=5 2016-07-30@03:36:50.743 [brltty] activity state change: braille-driver: 1[prepared] 2016-07-30@03:36:50.743 [brltty] activity state change: braille-driver: 2[scheduled] 2016-07-30@03:36:50.743 [brltty] program exit event added: speech-data 2016-07-30@03:36:50.744 [brltty] program exit event added: speech-driver 2016-07-30@03:36:50.744 [brltty] activity action request: speech-driver: start 2016-07-30@03:36:50.744 [brltty] activity state change: speech-driver: 4[preparing] 2016-07-30@03:36:50.744 [brltty] activity state change: speech-driver: 1[prepared] 2016-07-30@03:36:50.744 [brltty] activity state change: speech-driver: 2[scheduled] 2016-07-30@03:36:50.744 [brltty] Speech Input: none 2016-07-30@03:36:50.744 [brltty] program exit event added: sessions 2016-07-30@03:36:50.744 [brltty] pushed command environment: main 2016-07-30@03:36:50.744 [brltty] pushed command handler: unhandled 2016-07-30@03:36:50.744 [brltty] pushed command handler: miscellaneous 2016-07-30@03:36:50.744 [brltty] pushed command handler: learn 2016-07-30@03:36:50.744 [brltty] pushed command handler: speech 2016-07-30@03:36:50.744 [brltty] pushed command handler: clipboard 2016-07-30@03:36:50.744 [brltty] pushed command handler: preferences 2016-07-30@03:36:50.744 [brltty] pushed command handler: toggle 2016-07-30@03:36:50.744 [brltty] pushed command handler: touch 2016-07-30@03:36:50.744 [brltty] report listener registered: 0: keycodeCommandDataResetListener 2016-07-30@03:36:50.744 [brltty] pushed command handler: keycodes 2016-07-30@03:36:50.745 [brltty] report listener registered: 0: inputCommandDataResetListener 2016-07-30@03:36:50.745 [brltty] pushed command handler: input 2016-07-30@03:36:50.745 [brltty] pushed command handler: navigation 2016-07-30@03:36:50.745 [brltty] pushed command handler: screen 2016-07-30@03:36:50.745 [brltty] pushed command handler: custom 2016-07-30@03:36:50.745 [brltty] activity state change: screen-driver: 6[starting] 2016-07-30@03:36:50.745 [brltty] checking for screen driver: lx 2016-07-30@03:36:50.746 [brltty] initializing screen driver: lx 2016-07-30@03:36:50.746 [brltty] device directory: /dev 2016-07-30@03:36:50.746 [brltty] checking screen device: /dev/vcsa 2016-07-30@03:36:50.746 [brltty] screen device: vcsa 2016-07-30@03:36:50.746 [brltty] checking console device: /dev/tty0 2016-07-30@03:36:50.746 [brltty] console device: tty0 2016-07-30@03:36:50.746 [brltty] device opened: /dev/vcsa: fd=7 2016-07-30@03:36:50.746 [brltty] screen opened: vcsa: fd=7 2016-07-30@03:36:50.746 [brltty] device opened: /dev/tty0: fd=9 2016-07-30@03:36:50.746 [brltty] console opened: tty0: fd=9 2016-07-30@03:36:50.746 [brltty] screen is monitorable: yes 2016-07-30@03:36:50.747 [brltty] Screen Font Map Size: 303 2016-07-30@03:36:50.747 [brltty] VGA Character Count: 256(small) 2016-07-30@03:36:50.747 [brltty] attributes masks: font=0000 unshifted=FF00 shifted=0000 2016-07-30@03:36:50.747 [brltty] starting host command: /sbin/modprobe 2016-07-30@03:36:50.753 [brltty] host command exit status: 0: /sbin/modprobe 2016-07-30@03:36:50.753 [brltty] activity state change: braille-driver: 6[starting] 2016-07-30@03:36:50.753 [brltty] checking braille device: usb: 2016-07-30@03:36:50.753 [brltty] performing braille driver autodetection 2016-07-30@03:36:50.754 [brltty] checking for braille driver: al 2016-07-30@03:36:50.754 [brltty] initializing braille driver: al -> usb: 2016-07-30@03:36:50.756 [brltty] braille driver initialization failed: al -> usb: 2016-07-30@03:36:50.756 [brltty] checking for braille driver: bm 2016-07-30@03:36:50.756 [brltty] initializing braille driver: bm -> usb: 2016-07-30@03:36:50.757 [brltty] braille driver initialization failed: bm -> usb: 2016-07-30@03:36:50.757 [brltty] checking for braille driver: eu 2016-07-30@03:36:50.757 [brltty] initializing braille driver: eu -> usb: 2016-07-30@03:36:50.758 [brltty] braille driver initialization failed: eu -> usb: 2016-07-30@03:36:50.758 [brltty] checking for braille driver: fs 2016-07-30@03:36:50.758 [brltty] initializing braille driver: fs -> usb: 2016-07-30@03:36:50.759 [brltty] braille driver initialization failed: fs -> usb: 2016-07-30@03:36:50.759 [brltty] checking for braille driver: hd 2016-07-30@03:36:50.759 [brltty] initializing braille driver: hd -> usb: 2016-07-30@03:36:50.760 [brltty] braille driver initialization failed: hd -> usb: 2016-07-30@03:36:50.760 [brltty] checking for braille driver: hm 2016-07-30@03:36:50.760 [brltty] initializing braille driver: hm -> usb: 2016-07-30@03:36:50.760 [brltty] braille driver initialization failed: hm -> usb: 2016-07-30@03:36:50.760 [brltty] checking for braille driver: ht 2016-07-30@03:36:50.761 [brltty] initializing braille driver: ht -> usb: 2016-07-30@03:36:50.761 [brltty] braille driver initialization failed: ht -> usb: 2016-07-30@03:36:50.761 [brltty] checking for braille driver: hw 2016-07-30@03:36:50.762 [brltty] initializing braille driver: hw -> usb: 2016-07-30@03:36:50.762 [brltty] braille driver initialization failed: hw -> usb: 2016-07-30@03:36:50.762 [brltty] checking for braille driver: mt 2016-07-30@03:36:50.762 [brltty] initializing braille driver: mt -> usb: 2016-07-30@03:36:50.763 [brltty] braille driver initialization failed: mt -> usb: 2016-07-30@03:36:50.763 [brltty] checking for braille driver: pg 2016-07-30@03:36:50.763 [brltty] initializing braille driver: pg -> usb: 2016-07-30@03:36:50.764 [brltty] braille driver initialization failed: pg -> usb: 2016-07-30@03:36:50.764 [brltty] checking for braille driver: pm 2016-07-30@03:36:50.764 [brltty] initializing braille driver: pm -> usb: 2016-07-30@03:36:50.765 [brltty] braille driver initialization failed: pm -> usb: 2016-07-30@03:36:50.765 [brltty] checking for braille driver: sk 2016-07-30@03:36:50.765 [brltty] initializing braille driver: sk -> usb: 2016-07-30@03:36:50.765 [brltty] braille driver initialization failed: sk -> usb: 2016-07-30@03:36:50.765 [brltty] checking for braille driver: vo 2016-07-30@03:36:50.766 [brltty] initializing braille driver: vo -> usb: 2016-07-30@03:36:50.766 [brltty] braille driver initialization failed: vo -> usb: 2016-07-30@03:36:50.766 [brltty] braille driver not found 2016-07-30@03:36:50.766 [brltty] checking braille device: bluetooth:00:25:EC:01:8D:EB 2016-07-30@03:36:50.766 [brltty] program exit event added: bluetooth-device-queue 2016-07-30@03:36:50.767 [brltty] activity state change: speech-driver: 6[starting] 2016-07-30@03:36:50.767 [brltty] no autodetectable speech drivers 2016-07-30@03:36:50.767 [brltty] checking for speech driver: no 2016-07-30@03:36:50.767 [brltty] initializing speech driver: no 2016-07-30@03:36:50.767 [brltty] Speech Driver: no [NoSpeech] 2016-07-30@03:36:50.767 [brltty] NoSpeech Speech Driver: 2016-07-30@03:36:50.767 [brltty] activity state change: speech-driver: 3[started] 2016-07-30@03:36:50.829 [brltty] performing braille driver autodetection 2016-07-30@03:36:50.829 [brltty] checking for braille driver: hw 2016-07-30@03:36:50.830 [brltty] initializing braille driver: hw -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@03:36:51.137 [brltty] output packet: sent: 1B 00 00 2016-07-30@03:36:51.173 [brltty] input packet: 1B 01 03 00 02 20 2016-07-30@03:36:51.173 [brltty] detected Humanware device: model=2 cells=32 2016-07-30@03:36:51.173 [brltty] Braille Display Dimensions: 1 row, 32 columns 2016-07-30@03:36:51.173 [brltty] regions: text=0.32 status=0.0 2016-07-30@03:36:51.173 [brltty] shifts: full=32 half=16 vertical=5 2016-07-30@03:36:51.173 [brltty] Key Bindings: all 2016-07-30@03:36:51.173 [brltty] program exit event added: sorted-command-table 2016-07-30@03:36:51.174 [brltty] file opened: /etc/brltty/Input/hw/all.ktb fd=15 2016-07-30@03:36:51.174 [brltty] including data file: /etc/brltty/Input/hw/all.ktb 2016-07-30@03:36:51.174 [brltty] file opened: /etc/brltty/Input/hw/../chords.kti fd=16 2016-07-30@03:36:51.174 [brltty] including data file: /etc/brltty/Input/hw/../chords.kti 2016-07-30@03:36:51.176 [brltty] program exit event added: sorted-keyboard-functions 2016-07-30@03:36:51.176 [brltty] file opened: /etc/brltty/Input/hw/../bm/display6.kti fd=16 2016-07-30@03:36:51.176 [brltty] including data file: /etc/brltty/Input/hw/../bm/display6.kti 2016-07-30@03:36:51.178 [brltty] file opened: /etc/brltty/Input/hw/../bm/routing6.kti fd=16 2016-07-30@03:36:51.178 [brltty] including data file: /etc/brltty/Input/hw/../bm/routing6.kti 2016-07-30@03:36:51.197 [brltty] Key Table: /etc/brltty/Input/hw/all.ktb 2016-07-30@03:36:51.201 [brltty] report: 0: keycodeCommandDataResetListener 2016-07-30@03:36:51.201 [brltty] report: 0: inputCommandDataResetListener 2016-07-30@03:36:51.201 [brltty] Braille Driver: hw [HumanWare] 2016-07-30@03:36:51.201 [brltty] HumanWare Braille Driver: 2016-07-30@03:36:51.201 [brltty] Braille Device: bluetooth:00:25:EC:01:8D:EB 2016-07-30@03:36:51.201 [brltty] Old Preferences File: /etc/brltty-hw.prefs 2016-07-30@03:36:51.201 [brltty] cannot open file: /etc/brltty-hw.prefs: No such file or directory 2016-07-30@03:36:51.201 [brltty] regions: text=0.32 status=0.0 2016-07-30@03:36:51.201 [brltty] shifts: full=32 half=16 vertical=5 2016-07-30@03:36:51.202 [brltty] starting host command: /sbin/modprobe 2016-07-30@03:36:51.208 [brltty] host command exit status: 1: /sbin/modprobe 2016-07-30@03:36:51.208 [brltty] kernel module not installed: pcspkr 2016-07-30@03:36:51.208 [brltty] console opened: fd=15 2016-07-30@03:36:51.208 [brltty] program exit event added: console-stream 2016-07-30@03:36:51.208 [brltty] beeper enabled 2016-07-30@03:36:51.209 [brltty] program exit event added: tunes 2016-07-30@03:36:51.209 [brltty] tone: msec=60 note=64 2016-07-30@03:36:51.269 [brltty] tone: msec=100 note=69 2016-07-30@03:36:51.369 [brltty] activity state change: braille-driver: 3[started] 2016-07-30@03:36:51.369 [brltty] checking uinput device: /dev/uinput 2016-07-30@03:36:51.369 [brltty] uinput device: uinput 2016-07-30@03:36:51.369 [brltty] device opened: /dev/uinput: fd=16 2016-07-30@03:36:51.369 [brltty] uinput opened: uinput fd=16 2016-07-30@03:36:51.370 [brltty] report listener registered: 1: lxBrailleOfflineListener 2016-07-30@03:36:51.370 [brltty] Screen Driver: lx [Linux] 2016-07-30@03:36:51.370 [brltty] Linux Screen Driver: 2016-07-30@03:36:51.370 [brltty] Screen Parameter: charset= 2016-07-30@03:36:51.373 [brltty] Screen Parameter: hfb= 2016-07-30@03:36:51.373 [brltty] Screen Parameter: debugsfm= 2016-07-30@03:36:51.373 [brltty] activity state change: screen-driver: 3[started] 2016-07-30@03:36:51.373 [brltty] Screen Font Map Size: 303 2016-07-30@03:36:51.373 [brltty] VGA Character Count: 256(small) 2016-07-30@03:36:51.373 [brltty] attributes masks: font=0000 unshifted=FF00 shifted=0000 2016-07-30@03:36:51.373 [brltty] console number changed: 0 -> 7 2016-07-30@03:36:51.374 [brltty] output packet: sent: 1B 02 20 0E 09 17 11 11 1D 00 1D 15 1E 00 0A 1D 00 1E 11 2D 1E 00 0D 15 19 11 00 00 00 00 00 00 00 00 00 2016-07-30@03:36:51.374 [brltty] pushed command environment: message 2016-07-30@03:36:51.374 [brltty] pushed command handler: message 2016-07-30@03:36:51.374 [brltty] output packet: sent: 1B 02 20 43 57 47 5E 5E 7D 00 31 32 23 19 11 27 00 17 11 27 00 43 57 47 5E 5E 7D 24 31 32 21 24 3B 2A 34 2016-07-30@03:36:53.270 [brltty] beeper disabled 2016-07-30@03:36:55.377 [brltty] output packet: sent: 1B 02 20 39 24 1B 31 2B 31 11 2A 03 21 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2016-07-30@03:36:57.673 [server-main] BrlAPI connection fd=17 accepted: local <unnamed> 2016-07-30@03:36:57.674 [server-main] writing error 6 to 17 2016-07-30@03:36:57.674 [server-main] ((!strncmp(&getDevicePacket->name, trueBraille->definition.name, remaining))) not met: wrong driver name 2016-07-30@03:36:57.674 [server-main] adding range [0(0)..ffffffff(ffffffff)] 2016-07-30@03:36:57.674 [server-main] removing range [2000004c(0)..2000004c(ffffffff)] 2016-07-30@03:36:57.674 [server-main] removing range [20000000(0)..20000000(ffffffff)] 2016-07-30@03:36:57.675 [server-main] removing range [2000004a(0)..2000004a(ffffffff)] 2016-07-30@03:36:57.675 [server-main] removing range [2000004b(0)..2000004b(ffffffff)] 2016-07-30@03:36:57.675 [server-main] removing range [20060000(0)..2006ffff(ffffffff)] 2016-07-30@03:36:57.675 [server-main] removing range [20000046(0)..20000046(ffffffff)] 2016-07-30@03:36:57.675 [server-main] removing range [20000047(0)..20000047(ffffffff)] 2016-07-30@03:36:57.675 [server-main] removing range [20240000(0)..2024ffff(ffffffff)] 2016-07-30@03:36:57.675 [server-main] removing range [20230000(0)..2023ffff(ffffffff)] 2016-07-30@03:36:57.675 [server-main] removing range [20250000(0)..2025ffff(ffffffff)] 2016-07-30@03:36:57.675 [server-main] removing range [20220000(0)..2022ffff(ffffffff)] 2016-07-30@03:36:57.675 [server-main] program exit event added: wchar-charset 2016-07-30@03:36:57.675 [server-main] program exit event added: charset-iconv 2016-07-30@03:36:57.675 [server-main] program exit event added: current-charset 2016-07-30@03:36:59.380 [brltty] popped command handler: message 2016-07-30@03:36:59.380 [brltty] popped command environment: message 2016-07-30@03:37:00.557 [brltty] input packet: 1B 05 01 04 2016-07-30@03:37:00.557 [brltty] program exit event added: command-queue 2016-07-30@03:37:00.557 [brltty] brl key press: Dot3 (Ctx:2 Grp:0 Num:4) -> NOOP (Cmd:000000) 2016-07-30@03:37:00.557 [brltty] command: 000000 (NOOP: do nothing) 2016-07-30@03:37:00.808 [brltty] input packet: 1B 06 01 04 2016-07-30@03:37:00.808 [brltty] brl key release: Dot3 (Ctx:2 Grp:0 Num:4) -> PASSDOTS (Cmd:002204)
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
