No, the space bar and the braille buttons are unresponsive until brltty is restarted. Only the control and routing keys seem to be active. It looks like only those codes with a high bit set eg: (code=20000001) not (code=20) as reported by brlapitest
On Thu, Jul 28, 2016 at 9:13 PM, Dave Mielke <d...@mielke.cc> wrote: > [quoted lines by Michael Katzmann on 2016/07/28 at 19:32 -0400] > > >I also tried a Refreshabraille 18 and it behaved the same, so it is not > >specific to the Brailiant. The braille keys on the Refreshabraille only > >worked after restarting brltty (control and routing keys were OK from the > >get-go .. just like the Brailliant) > >It looks as if it is an issue with brltty, the configuration or it's > >interaction with linux. > > Since the Refreshabraille is using a different driver, yes, it has to be a > more > general issue. Does the space bar work? > > -- > Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of > God. > Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ > EMail: d...@mielke.cc | Canada K2A 1H7 | http://FamilyRadio.org/ > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: BRLTTY@mielke.cc > For general information, go to: http://mielke.cc/mailman/listinfo/brltty >
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
