Here is the log using 5.4 The result is unchanged On Sat, Jul 30, 2016 at 5:50 PM, Michael Katzmann <m...@nlsbph.org> wrote:
> Here are the logs with API (server) log enabled > > I'll compile up 5.4 from the git repo (I'm using the distribution package) > and see if that makes any difference. > > On Sat, Jul 30, 2016 at 4:55 PM, Dave Mielke <d...@mielke.cc> wrote: > >> [quoted lines by Michael Katzmann on 2016/07/30 at 12:55 -0400] >> >> >Yes, that's the point... I get no log file if brltty is started bt >> systemd >> >with "Type=forking". >> >> What does "systemctl status brltty" report when Type=forking? >> >> >I added api to the "log-level" option >> >log-level debug,inpkts,outpkts,brlkeys,brldrv,api >> >> So much for trusting my memory. It's server - not api. >> >> Is it possible, by the way, for you to use 5.4 instead of 5.2? >> >> -- >> Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of >> God. >> Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ >> EMail: d...@mielke.cc | Canada K2A 1H7 | http://FamilyRadio.org/ >> _______________________________________________ >> This message was sent via the BRLTTY mailing list. >> To post a message, send an e-mail to: BRLTTY@mielke.cc >> For general information, go to: http://mielke.cc/mailman/listinfo/brltty >> > >
2016-07-30@22:59:25.230 [brltty] BRLTTY 5.4 rev unknown [http://brltty.com/] 2016-07-30@22:59:25.232 [brltty] lock descriptor allocated: queue-discarded-elements 2016-07-30@22:59:25.232 [brltty] Log Level: debug,inpkts,outpkts,brlkeys,brldrv,server 2016-07-30@22:59:25.233 [brltty] pushed command environment: initial 2016-07-30@22:59:25.233 [brltty] report listener registered: 0: handleUpdateBrailleOnline 2016-07-30@22:59:25.235 [brltty] program exit event added: pid-file 2016-07-30@22:59:25.235 [brltty] program exit event added: screen-data 2016-07-30@22:59:25.235 [brltty] Working Directory: / 2016-07-30@22:59:25.235 [brltty] Configuration File: /etc/brltty.conf 2016-07-30@22:59:25.235 [brltty] Updatable Directory: /var/lib/brltty 2016-07-30@22:59:25.236 [brltty] Preferences File: brltty.prefs 2016-07-30@22:59:25.236 [brltty] Writable Directory: /var/run/brltty 2016-07-30@22:59:25.236 [brltty] Drivers Directory: /lib/brltty 2016-07-30@22:59:25.236 [brltty] Tables Directory: /etc/brltty 2016-07-30@22:59:25.236 [brltty] directory created: /var/lib/brltty 2016-07-30@22:59:25.236 [brltty] program exit event added: tunes 2016-07-30@22:59:25.236 [brltty] tune thread state change: 0 -> 1 2016-07-30@22:59:25.237 [brltty] tune thread state change: 1 -> 3 2016-07-30@22:59:25.237 [brltty] regions: text=0.0 status=0.0 2016-07-30@22:59:25.237 [brltty] shifts: full=1 half=0 vertical=5 2016-07-30@22:59:25.237 [brltty] checking for text table: /etc/brltty/Text/en_GB.ttb 2016-07-30@22:59:25.237 [brltty] compiling text table: /etc/brltty/Text/en_GB.ttb 2016-07-30@22:59:25.237 [brltty] file opened: /etc/brltty/Text/en_GB.ttb fd=8 2016-07-30@22:59:25.237 [brltty] including data file: /etc/brltty/Text/en_GB.ttb 2016-07-30@22:59:25.237 [brltty] file opened: /etc/brltty/Text/ltr-latin.tti fd=9 2016-07-30@22:59:25.237 [brltty] including data file: /etc/brltty/Text/ltr-latin.tti 2016-07-30@22:59:25.238 [brltty] file opened: /etc/brltty/Text/ltr-alias.tti fd=10 2016-07-30@22:59:25.238 [brltty] including data file: /etc/brltty/Text/ltr-alias.tti 2016-07-30@22:59:25.250 [brltty] file opened: /etc/brltty/Text/ctl-latin.tti fd=9 2016-07-30@22:59:25.250 [brltty] including data file: /etc/brltty/Text/ctl-latin.tti 2016-07-30@22:59:25.253 [brltty] file opened: /etc/brltty/Text/common.tti fd=9 2016-07-30@22:59:25.253 [brltty] including data file: /etc/brltty/Text/common.tti 2016-07-30@22:59:25.253 [brltty] file opened: /etc/brltty/Text/spaces.tti fd=10 2016-07-30@22:59:25.253 [brltty] including data file: /etc/brltty/Text/spaces.tti 2016-07-30@22:59:25.253 [brltty] file opened: /etc/brltty/Text/boxes.tti fd=10 2016-07-30@22:59:25.253 [brltty] including data file: /etc/brltty/Text/boxes.tti 2016-07-30@22:59:25.255 [brltty] file opened: /etc/brltty/Text/blocks.tti fd=10 2016-07-30@22:59:25.256 [brltty] including data file: /etc/brltty/Text/blocks.tti 2016-07-30@22:59:25.257 [brltty] Text Table: en_GB 2016-07-30@22:59:25.257 [brltty] program exit event added: text-table 2016-07-30@22:59:25.257 [brltty] Attributes Table: left_right 2016-07-30@22:59:25.257 [brltty] program exit event added: attributes-table 2016-07-30@22:59:25.257 [brltty] program exit event added: contraction-table 2016-07-30@22:59:25.257 [brltty] Contraction Table: none 2016-07-30@22:59:25.257 [brltty] Keyboard Property: type= 2016-07-30@22:59:25.257 [brltty] Keyboard Property: vendor= 2016-07-30@22:59:25.257 [brltty] Keyboard Property: product= 2016-07-30@22:59:25.257 [brltty] program exit event added: keyboard-table 2016-07-30@22:59:25.257 [brltty] Keyboard Table: none 2016-07-30@22:59:25.257 [brltty] program exit event added: screen-driver 2016-07-30@22:59:25.257 [brltty] activity action request: screen-driver: start 2016-07-30@22:59:25.257 [brltty] activity state change: screen-driver: 4[preparing] 2016-07-30@22:59:25.257 [brltty] activity state change: screen-driver: 1[prepared] 2016-07-30@22:59:25.257 [brltty] activity state change: screen-driver: 2[scheduled] 2016-07-30@22:59:25.257 [brltty] BrlAPI Server: release 0.6.5 2016-07-30@22:59:25.257 [brltty] API Parameter: auth= 2016-07-30@22:59:25.257 [brltty] API Parameter: host= 2016-07-30@22:59:25.257 [brltty] API Parameter: stacksize= 2016-07-30@22:59:25.257 [brltty] program exit event added: address-table 2016-07-30@22:59:25.258 [brltty] program exit event added: api-server 2016-07-30@22:59:25.258 [server-main] server: server thread started 2016-07-30@22:59:25.258 [brltty] program exit event added: braille-data 2016-07-30@22:59:25.258 [brltty] program exit event added: braille-driver 2016-07-30@22:59:25.258 [brltty] activity action request: braille-driver: start 2016-07-30@22:59:25.258 [brltty] activity state change: braille-driver: 4[preparing] 2016-07-30@22:59:25.258 [brltty] Braille Display Dimensions: 1 row, 1 column 2016-07-30@22:59:25.258 [brltty] regions: text=0.1 status=0.0 2016-07-30@22:59:25.258 [brltty] shifts: full=1 half=0 vertical=5 2016-07-30@22:59:25.258 [brltty] activity state change: braille-driver: 1[prepared] 2016-07-30@22:59:25.258 [brltty] activity state change: braille-driver: 2[scheduled] 2016-07-30@22:59:25.258 [server-main] server: socket creation started: 0 2016-07-30@22:59:25.258 [server-main] server: creating socket: 0 (LOCAL:0) 2016-07-30@22:59:25.258 [brltty] program exit event added: speech-data 2016-07-30@22:59:25.258 [brltty] program exit event added: speech-driver 2016-07-30@22:59:25.258 [brltty] activity action request: speech-driver: start 2016-07-30@22:59:25.258 [brltty] activity state change: speech-driver: 4[preparing] 2016-07-30@22:59:25.258 [brltty] activity state change: speech-driver: 1[prepared] 2016-07-30@22:59:25.258 [brltty] activity state change: speech-driver: 2[scheduled] 2016-07-30@22:59:25.259 [brltty] Speech Input: none 2016-07-30@22:59:25.259 [brltty] program exit event added: sessions 2016-07-30@22:59:25.259 [brltty] pushed command environment: main 2016-07-30@22:59:25.259 [brltty] pushed command handler: unhandled 2016-07-30@22:59:25.259 [brltty] pushed command handler: miscellaneous 2016-07-30@22:59:25.259 [brltty] pushed command handler: learn 2016-07-30@22:59:25.259 [brltty] pushed command handler: speech 2016-07-30@22:59:25.259 [brltty] pushed command handler: clipboard 2016-07-30@22:59:25.259 [server-main] server: linking local socket lock: File exists 2016-07-30@22:59:25.259 [brltty] pushed command handler: preferences 2016-07-30@22:59:25.259 [brltty] pushed command handler: toggle 2016-07-30@22:59:25.259 [brltty] report listener registered: 3: brailleWindowUpdatedListener 2016-07-30@22:59:25.259 [brltty] pushed command handler: touch 2016-07-30@22:59:25.259 [brltty] report listener registered: 0: keycodeCommandDataResetListener 2016-07-30@22:59:25.259 [brltty] pushed command handler: keycodes 2016-07-30@22:59:25.260 [server-main] server: socket 0 created (fd 10) 2016-07-30@22:59:25.260 [brltty] report listener registered: 0: inputCommandDataResetListener 2016-07-30@22:59:25.260 [server-main] server: socket creation started: 1 2016-07-30@22:59:25.260 [server-main] server: creating socket: 1 (127.0.0.1:4101) 2016-07-30@22:59:25.260 [brltty] pushed command handler: input 2016-07-30@22:59:25.260 [brltty] pushed command handler: navigation 2016-07-30@22:59:25.260 [brltty] pushed command handler: screen 2016-07-30@22:59:25.260 [brltty] pushed command handler: custom 2016-07-30@22:59:25.260 [brltty] pushed command handler: API 2016-07-30@22:59:25.260 [server-main] server: socket 1 created (fd 11) 2016-07-30@22:59:25.260 [server-main] server: socket creation finished: 1 2016-07-30@22:59:25.260 [brltty] activity state change: screen-driver: 6[starting] 2016-07-30@22:59:25.260 [brltty] checking for screen driver: lx 2016-07-30@22:59:25.260 [server-main] server: socket creation finished: 0 2016-07-30@22:59:25.261 [brltty] initializing screen driver: lx 2016-07-30@22:59:25.261 [brltty] device directory: /dev 2016-07-30@22:59:25.261 [brltty] checking screen device: /dev/vcsa 2016-07-30@22:59:25.261 [brltty] screen device: vcsa 2016-07-30@22:59:25.261 [brltty] checking console device: /dev/tty0 2016-07-30@22:59:25.261 [brltty] console device: tty0 2016-07-30@22:59:25.261 [brltty] device opened: /dev/tty1: fd=12 2016-07-30@22:59:25.261 [brltty] device opened: /dev/vcsa: fd=13 2016-07-30@22:59:25.262 [brltty] starting host command: /sbin/modprobe -q uinput 2016-07-30@22:59:25.268 [brltty] host command exit status: 0: /sbin/modprobe 2016-07-30@22:59:25.268 [brltty] activity state change: braille-driver: 6[starting] 2016-07-30@22:59:25.268 [brltty] checking braille device: usb: 2016-07-30@22:59:25.268 [brltty] performing braille driver autodetection 2016-07-30@22:59:25.269 [brltty] checking for braille driver: al 2016-07-30@22:59:25.269 [brltty] initializing braille driver: al -> usb: 2016-07-30@22:59:25.270 [brltty] braille driver initialization failed: al -> usb: 2016-07-30@22:59:25.270 [brltty] checking for braille driver: bm 2016-07-30@22:59:25.270 [brltty] initializing braille driver: bm -> usb: 2016-07-30@22:59:25.271 [brltty] braille driver initialization failed: bm -> usb: 2016-07-30@22:59:25.271 [brltty] checking for braille driver: eu 2016-07-30@22:59:25.271 [brltty] initializing braille driver: eu -> usb: 2016-07-30@22:59:25.272 [brltty] braille driver initialization failed: eu -> usb: 2016-07-30@22:59:25.272 [brltty] checking for braille driver: fs 2016-07-30@22:59:25.272 [brltty] initializing braille driver: fs -> usb: 2016-07-30@22:59:25.273 [brltty] braille driver initialization failed: fs -> usb: 2016-07-30@22:59:25.273 [brltty] checking for braille driver: hd 2016-07-30@22:59:25.273 [brltty] initializing braille driver: hd -> usb: 2016-07-30@22:59:25.273 [brltty] braille driver initialization failed: hd -> usb: 2016-07-30@22:59:25.274 [brltty] checking for braille driver: hm 2016-07-30@22:59:25.274 [brltty] initializing braille driver: hm -> usb: 2016-07-30@22:59:25.274 [brltty] braille driver initialization failed: hm -> usb: 2016-07-30@22:59:25.274 [brltty] checking for braille driver: ht 2016-07-30@22:59:25.275 [brltty] initializing braille driver: ht -> usb: 2016-07-30@22:59:25.275 [brltty] braille driver initialization failed: ht -> usb: 2016-07-30@22:59:25.275 [brltty] checking for braille driver: hw 2016-07-30@22:59:25.276 [brltty] initializing braille driver: hw -> usb: 2016-07-30@22:59:25.276 [brltty] braille driver initialization failed: hw -> usb: 2016-07-30@22:59:25.276 [brltty] checking for braille driver: mt 2016-07-30@22:59:25.276 [brltty] initializing braille driver: mt -> usb: 2016-07-30@22:59:25.277 [brltty] braille driver initialization failed: mt -> usb: 2016-07-30@22:59:25.277 [brltty] checking for braille driver: pg 2016-07-30@22:59:25.277 [brltty] initializing braille driver: pg -> usb: 2016-07-30@22:59:25.278 [brltty] braille driver initialization failed: pg -> usb: 2016-07-30@22:59:25.278 [brltty] checking for braille driver: pm 2016-07-30@22:59:25.278 [brltty] initializing braille driver: pm -> usb: 2016-07-30@22:59:25.278 [brltty] braille driver initialization failed: pm -> usb: 2016-07-30@22:59:25.279 [brltty] checking for braille driver: sk 2016-07-30@22:59:25.279 [brltty] initializing braille driver: sk -> usb: 2016-07-30@22:59:25.279 [brltty] braille driver initialization failed: sk -> usb: 2016-07-30@22:59:25.279 [brltty] checking for braille driver: vo 2016-07-30@22:59:25.280 [brltty] initializing braille driver: vo -> usb: 2016-07-30@22:59:25.280 [brltty] braille driver initialization failed: vo -> usb: 2016-07-30@22:59:25.280 [brltty] braille driver not found 2016-07-30@22:59:25.280 [brltty] checking braille device: bluetooth:00:25:EC:01:8D:EB 2016-07-30@22:59:25.280 [brltty] program exit event added: bluetooth-device-queue 2016-07-30@22:59:25.280 [brltty] activity state change: speech-driver: 6[starting] 2016-07-30@22:59:25.280 [brltty] no autodetectable speech drivers 2016-07-30@22:59:25.281 [brltty] checking for speech driver: no 2016-07-30@22:59:25.281 [brltty] initializing speech driver: no 2016-07-30@22:59:25.281 [brltty] Speech Driver: no [NoSpeech] 2016-07-30@22:59:25.281 [brltty] NoSpeech Speech Driver: 2016-07-30@22:59:25.281 [brltty] activity state change: speech-driver: 3[started] 2016-07-30@22:59:29.285 [brltty] device opened: /dev/tty0: fd=19 2016-07-30@22:59:30.283 [brltty] performing braille driver autodetection 2016-07-30@22:59:30.283 [brltty] checking for braille driver: np 2016-07-30@22:59:30.284 [brltty] initializing braille driver: np -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@22:59:30.285 [brltty] RFCOMM connect error 114: Operation already in progress. 2016-07-30@22:59:30.285 [brltty] braille driver initialization failed: np -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@22:59:30.285 [brltty] checking for braille driver: ht 2016-07-30@22:59:30.285 [brltty] initializing braille driver: ht -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@22:59:30.285 [brltty] braille driver initialization failed: ht -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@22:59:30.285 [brltty] checking for braille driver: al 2016-07-30@22:59:30.286 [brltty] initializing braille driver: al -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@22:59:35.549 [brltty] L2CAP connect error 112: Host is down. 2016-07-30@22:59:35.549 [brltty] braille driver initialization failed: al -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@22:59:35.549 [brltty] checking for braille driver: bm 2016-07-30@22:59:35.550 [brltty] initializing braille driver: bm -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@22:59:40.839 [brltty] L2CAP connect error 112: Host is down. 2016-07-30@22:59:40.839 [brltty] braille driver initialization failed: bm -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@22:59:40.839 [brltty] braille driver not found 2016-07-30@22:59:40.839 [brltty] checking braille device: bluetooth:00:17:91:04:7D:10 2016-07-30@22:59:45.845 [brltty] performing braille driver autodetection 2016-07-30@22:59:45.845 [brltty] checking for braille driver: np 2016-07-30@22:59:45.846 [brltty] initializing braille driver: np -> bluetooth:00:17:91:04:7D:10 2016-07-30@22:59:45.847 [brltty] RFCOMM connect error 114: Operation already in progress. 2016-07-30@22:59:45.847 [brltty] braille driver initialization failed: np -> bluetooth:00:17:91:04:7D:10 2016-07-30@22:59:45.847 [brltty] checking for braille driver: ht 2016-07-30@22:59:45.847 [brltty] initializing braille driver: ht -> bluetooth:00:17:91:04:7D:10 2016-07-30@22:59:45.847 [brltty] braille driver initialization failed: ht -> bluetooth:00:17:91:04:7D:10 2016-07-30@22:59:45.847 [brltty] checking for braille driver: al 2016-07-30@22:59:45.848 [brltty] initializing braille driver: al -> bluetooth:00:17:91:04:7D:10 2016-07-30@22:59:45.996 [brltty] L2CAP connect error 114: Operation already in progress. 2016-07-30@22:59:45.996 [brltty] braille driver initialization failed: al -> bluetooth:00:17:91:04:7D:10 2016-07-30@22:59:45.996 [brltty] checking for braille driver: bm 2016-07-30@22:59:45.997 [brltty] initializing braille driver: bm -> bluetooth:00:17:91:04:7D:10 2016-07-30@22:59:51.279 [brltty] L2CAP connect error 112: Host is down. 2016-07-30@22:59:51.279 [brltty] braille driver initialization failed: bm -> bluetooth:00:17:91:04:7D:10 2016-07-30@22:59:51.279 [brltty] braille driver not found 2016-07-30@22:59:51.279 [brltty] activity action failed: braille-driver: start 2016-07-30@22:59:51.279 [brltty] activity state change: braille-driver: 2[scheduled] 2016-07-30@22:59:51.279 [brltty] checking uinput device: /dev/uinput 2016-07-30@22:59:51.279 [brltty] uinput device: uinput 2016-07-30@22:59:51.279 [brltty] device opened: /dev/uinput: fd=14 2016-07-30@22:59:51.280 [brltty] uinput opened: uinput fd=14 2016-07-30@22:59:51.281 [brltty] report listener registered: 1: lxBrailleOfflineListener 2016-07-30@22:59:51.281 [brltty] Screen Driver: lx [Linux] 2016-07-30@22:59:51.281 [brltty] Linux Screen Driver: 2016-07-30@22:59:51.281 [brltty] Screen Parameter: charset= 2016-07-30@22:59:51.281 [brltty] Screen Parameter: debugsfm= 2016-07-30@22:59:51.281 [brltty] Screen Parameter: hfb= 2016-07-30@22:59:51.281 [brltty] Screen Parameter: vt= 2016-07-30@22:59:51.281 [brltty] activity state change: screen-driver: 3[started] 2016-07-30@22:59:51.281 [brltty] activity state change: braille-driver: 6[starting] 2016-07-30@22:59:51.281 [brltty] checking braille device: usb: 2016-07-30@22:59:51.281 [brltty] performing braille driver autodetection 2016-07-30@22:59:51.281 [brltty] checking for braille driver: al 2016-07-30@22:59:51.282 [brltty] initializing braille driver: al -> usb: 2016-07-30@22:59:51.283 [brltty] braille driver initialization failed: al -> usb: 2016-07-30@22:59:51.283 [brltty] checking for braille driver: bm 2016-07-30@22:59:51.283 [brltty] initializing braille driver: bm -> usb: 2016-07-30@22:59:51.284 [brltty] braille driver initialization failed: bm -> usb: 2016-07-30@22:59:51.284 [brltty] checking for braille driver: eu 2016-07-30@22:59:51.284 [brltty] initializing braille driver: eu -> usb: 2016-07-30@22:59:51.285 [brltty] braille driver initialization failed: eu -> usb: 2016-07-30@22:59:51.285 [brltty] checking for braille driver: fs 2016-07-30@22:59:51.286 [brltty] initializing braille driver: fs -> usb: 2016-07-30@22:59:51.287 [brltty] braille driver initialization failed: fs -> usb: 2016-07-30@22:59:51.287 [brltty] checking for braille driver: hd 2016-07-30@22:59:51.287 [brltty] initializing braille driver: hd -> usb: 2016-07-30@22:59:51.288 [brltty] braille driver initialization failed: hd -> usb: 2016-07-30@22:59:51.288 [brltty] checking for braille driver: hm 2016-07-30@22:59:51.288 [brltty] initializing braille driver: hm -> usb: 2016-07-30@22:59:51.289 [brltty] braille driver initialization failed: hm -> usb: 2016-07-30@22:59:51.289 [brltty] checking for braille driver: ht 2016-07-30@22:59:51.289 [brltty] initializing braille driver: ht -> usb: 2016-07-30@22:59:51.290 [brltty] braille driver initialization failed: ht -> usb: 2016-07-30@22:59:51.290 [brltty] checking for braille driver: hw 2016-07-30@22:59:51.291 [brltty] initializing braille driver: hw -> usb: 2016-07-30@22:59:51.291 [brltty] braille driver initialization failed: hw -> usb: 2016-07-30@22:59:51.291 [brltty] checking for braille driver: mt 2016-07-30@22:59:51.292 [brltty] initializing braille driver: mt -> usb: 2016-07-30@22:59:51.292 [brltty] braille driver initialization failed: mt -> usb: 2016-07-30@22:59:51.292 [brltty] checking for braille driver: pg 2016-07-30@22:59:51.293 [brltty] initializing braille driver: pg -> usb: 2016-07-30@22:59:51.293 [brltty] braille driver initialization failed: pg -> usb: 2016-07-30@22:59:51.293 [brltty] checking for braille driver: pm 2016-07-30@22:59:51.293 [brltty] initializing braille driver: pm -> usb: 2016-07-30@22:59:51.294 [brltty] braille driver initialization failed: pm -> usb: 2016-07-30@22:59:51.294 [brltty] checking for braille driver: sk 2016-07-30@22:59:51.295 [brltty] initializing braille driver: sk -> usb: 2016-07-30@22:59:51.295 [brltty] braille driver initialization failed: sk -> usb: 2016-07-30@22:59:51.295 [brltty] checking for braille driver: vo 2016-07-30@22:59:51.295 [brltty] initializing braille driver: vo -> usb: 2016-07-30@22:59:51.296 [brltty] braille driver initialization failed: vo -> usb: 2016-07-30@22:59:51.296 [brltty] braille driver not found 2016-07-30@22:59:51.296 [brltty] checking braille device: bluetooth:00:25:EC:01:8D:EB 2016-07-30@22:59:54.200 [brltty] performing braille driver autodetection 2016-07-30@22:59:54.200 [brltty] checking for braille driver: hw 2016-07-30@22:59:54.201 [brltty] initializing braille driver: hw -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@22:59:58.862 [server-main] BrlAPI connection fd=21 accepted: local <unnamed> 2016-07-30@22:59:58.862 [server-main] server: authorization key loaded 2016-07-30@22:59:58.862 [server-main] server: received GetDriverName request on fd 21 2016-07-30@22:59:58.863 [server-main] server: received GetDisplaySize request on fd 21 2016-07-30@22:59:58.863 [server-main] server: received EnterRawMode request on fd 21 2016-07-30@22:59:58.863 [server-main] writing error 6 to 21 2016-07-30@22:59:58.863 [server-main] ((!strncmp(&getDevicePacket->name, trueBraille->definition.name, remaining))) not met: wrong driver name 2016-07-30@22:59:58.863 [server-main] server: error 6 on fd 21 2016-07-30@22:59:58.863 [server-main] server: received GetDisplaySize request on fd 21 2016-07-30@22:59:58.863 [server-main] server: received EnterTtyMode request on fd 21 2016-07-30@22:59:58.863 [server-main] adding range [0(0)..ffffffff(ffffffff)] 2016-07-30@22:59:58.863 [server-main] removing range [2000004c(0)..2000004c(ffffffff)] 2016-07-30@22:59:58.863 [server-main] removing range [20000000(0)..20000000(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [2000004a(0)..2000004a(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20000073(0)..20000073(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20000072(0)..20000072(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [2000004b(0)..2000004b(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20000075(0)..20000075(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20000074(0)..20000074(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20000077(0)..20000077(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20000076(0)..20000076(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20060000(0)..2006ffff(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20000046(0)..20000046(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20000047(0)..20000047(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [201e0000(0)..201effff(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20000078(0)..20000078(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20000079(0)..20000079(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20240000(0)..2024ffff(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20230000(0)..2023ffff(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20250000(0)..2025ffff(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20260000(0)..2026ffff(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [201f0000(0)..201fffff(ffffffff)] 2016-07-30@22:59:58.864 [server-main] removing range [20220000(0)..2022ffff(ffffffff)] 2016-07-30@22:59:58.864 [server-main] server: taking control of tty 0000000000 (how=0) 2016-07-30@22:59:58.864 [server-main] server: received Write request on fd 21 2016-07-30@22:59:58.864 [server-main] writing exception 6 to 21 2016-07-30@22:59:58.864 [server-main] (rbeg >= 1) && (rbeg <= displaySize) not met: invalid region start 2016-07-30@22:59:58.864 [server-main] server: exception 6 for packet type 119 on fd 21 2016-07-30@22:59:58.865 [server-main] server: closing connection on fd 21 2016-07-30@22:59:58.865 [server-main] server: client on fd 21 did not give up control of tty 0000000000 properly 2016-07-30@22:59:58.865 [server-main] server: releasing tty 0000000000 2016-07-30@23:00:00.148 [brltty] output packet: sent: 1B 00 00 2016-07-30@23:00:00.218 [brltty] input packet: 1B 01 03 00 02 20 2016-07-30@23:00:00.218 [brltty] detected Humanware device: model=2 cells=32 2016-07-30@23:00:00.218 [brltty] output packet: sent: 1B 0C 00 2016-07-30@23:00:00.218 [brltty] output packet: sent: 1B 03 00 2016-07-30@23:00:00.218 [brltty] Braille Display Dimensions: 1 row, 32 columns 2016-07-30@23:00:00.218 [brltty] regions: text=0.32 status=0.0 2016-07-30@23:00:00.218 [brltty] shifts: full=32 half=16 vertical=5 2016-07-30@23:00:00.218 [brltty] Key Bindings: mb2 2016-07-30@23:00:00.218 [brltty] program exit event added: sorted-command-table 2016-07-30@23:00:00.219 [brltty] file opened: /etc/brltty/Input/hw/mb2.ktb fd=21 2016-07-30@23:00:00.219 [brltty] including data file: /etc/brltty/Input/hw/mb2.ktb 2016-07-30@23:00:00.219 [brltty] file opened: /etc/brltty/Input/hw/nav.kti fd=22 2016-07-30@23:00:00.219 [brltty] including data file: /etc/brltty/Input/hw/nav.kti 2016-07-30@23:00:00.220 [brltty] file opened: /etc/brltty/Input/hw/../bm/display6.kti fd=23 2016-07-30@23:00:00.220 [brltty] including data file: /etc/brltty/Input/hw/../bm/display6.kti 2016-07-30@23:00:00.220 [brltty] file opened: /etc/brltty/Input/hw/../bm/d6.kti fd=24 2016-07-30@23:00:00.220 [brltty] including data file: /etc/brltty/Input/hw/../bm/d6.kti 2016-07-30@23:00:00.222 [brltty] file opened: /etc/brltty/Input/hw/../bm/routing6.kti fd=23 2016-07-30@23:00:00.222 [brltty] including data file: /etc/brltty/Input/hw/../bm/routing6.kti 2016-07-30@23:00:00.223 [brltty] file opened: /etc/brltty/Input/hw/kbd.kti fd=22 2016-07-30@23:00:00.223 [brltty] including data file: /etc/brltty/Input/hw/kbd.kti 2016-07-30@23:00:00.223 [brltty] file opened: /etc/brltty/Input/hw/../chords.kti fd=23 2016-07-30@23:00:00.223 [brltty] including data file: /etc/brltty/Input/hw/../chords.kti 2016-07-30@23:00:00.224 [brltty] file opened: /etc/brltty/Input/hw/../toggle.kti fd=24 2016-07-30@23:00:00.224 [brltty] including data file: /etc/brltty/Input/hw/../toggle.kti 2016-07-30@23:00:00.224 [brltty] file opened: /etc/brltty/Input/hw/../toggle.kti fd=24 2016-07-30@23:00:00.224 [brltty] including data file: /etc/brltty/Input/hw/../toggle.kti 2016-07-30@23:00:00.225 [brltty] file opened: /etc/brltty/Input/hw/../toggle.kti fd=24 2016-07-30@23:00:00.225 [brltty] including data file: /etc/brltty/Input/hw/../toggle.kti 2016-07-30@23:00:00.225 [brltty] file opened: /etc/brltty/Input/hw/../toggle.kti fd=24 2016-07-30@23:00:00.225 [brltty] including data file: /etc/brltty/Input/hw/../toggle.kti 2016-07-30@23:00:00.225 [brltty] file opened: /etc/brltty/Input/hw/../toggle.kti fd=24 2016-07-30@23:00:00.225 [brltty] including data file: /etc/brltty/Input/hw/../toggle.kti 2016-07-30@23:00:00.226 [brltty] file opened: /etc/brltty/Input/hw/../toggle.kti fd=24 2016-07-30@23:00:00.226 [brltty] including data file: /etc/brltty/Input/hw/../toggle.kti 2016-07-30@23:00:00.226 [brltty] file opened: /etc/brltty/Input/hw/../toggle.kti fd=24 2016-07-30@23:00:00.226 [brltty] including data file: /etc/brltty/Input/hw/../toggle.kti 2016-07-30@23:00:00.227 [brltty] file opened: /etc/brltty/Input/hw/../toggle.kti fd=24 2016-07-30@23:00:00.227 [brltty] including data file: /etc/brltty/Input/hw/../toggle.kti 2016-07-30@23:00:00.227 [brltty] file opened: /etc/brltty/Input/hw/../toggle.kti fd=24 2016-07-30@23:00:00.227 [brltty] including data file: /etc/brltty/Input/hw/../toggle.kti 2016-07-30@23:00:00.228 [brltty] file opened: /etc/brltty/Input/hw/../toggle.kti fd=24 2016-07-30@23:00:00.228 [brltty] including data file: /etc/brltty/Input/hw/../toggle.kti 2016-07-30@23:00:00.229 [brltty] file opened: /etc/brltty/Input/hw/../menu.kti fd=24 2016-07-30@23:00:00.229 [brltty] including data file: /etc/brltty/Input/hw/../menu.kti 2016-07-30@23:00:00.229 [brltty] program exit event added: sorted-keyboard-functions 2016-07-30@23:00:00.247 [brltty] Key Table: /etc/brltty/Input/hw/mb2.ktb 2016-07-30@23:00:00.247 [brltty] constructing special screen: help 2016-07-30@23:00:00.251 [brltty] server: api link 2016-07-30@23:00:00.251 [brltty] report listener registered: 0: brlapi_handleReports 2016-07-30@23:00:00.251 [brltty] Braille Driver: hw [HumanWare] 2016-07-30@23:00:00.251 [brltty] HumanWare Braille Driver: 2016-07-30@23:00:00.252 [brltty] Braille Device: bluetooth:00:25:EC:01:8D:EB 2016-07-30@23:00:00.252 [brltty] Old Preferences File: /etc/brltty-hw.prefs 2016-07-30@23:00:00.252 [brltty] cannot open file: /etc/brltty-hw.prefs: No such file or directory 2016-07-30@23:00:00.252 [brltty] regions: text=0.32 status=0.0 2016-07-30@23:00:00.252 [brltty] shifts: full=32 half=16 vertical=5 2016-07-30@23:00:00.252 [brltty] program exit event added: alert-tunes 2016-07-30@23:00:00.252 [brltty] activity state change: braille-driver: 3[started] 2016-07-30@23:00:00.252 [tune-thread] starting host command: /sbin/modprobe -q pcspkr 2016-07-30@23:00:00.252 [brltty] output packet: sent: 1B 02 20 0E 09 17 11 11 1D 00 1D 15 1E 00 0A 1D 00 1E 11 2D 1E 00 0D 15 19 11 00 00 00 00 00 00 00 00 00 2016-07-30@23:00:00.253 [brltty] server: api unlink 2016-07-30@23:00:00.254 [brltty] report listener unregistered: 0: brlapi_handleReports 2016-07-30@23:00:00.254 [brltty] pushed command environment: message 2016-07-30@23:00:00.254 [brltty] pushed command handler: message 2016-07-30@23:00:00.254 [brltty] output packet: sent: 1B 02 20 43 57 47 5E 5E 7D 00 31 32 39 00 17 11 27 00 25 1D 05 1D 15 3A 1D 00 00 00 00 00 00 00 00 00 00 2016-07-30@23:00:00.259 [tune-thread] host command exit status: 1: /sbin/modprobe 2016-07-30@23:00:00.259 [tune-thread] kernel module not installed: pcspkr 2016-07-30@23:00:00.259 [tune-thread] console opened: fd=21 2016-07-30@23:00:00.259 [tune-thread] program exit event added: console-stream 2016-07-30@23:00:00.259 [tune-thread] beeper enabled 2016-07-30@23:00:00.259 [tune-thread] tone: MSecs:60 Freq:329 2016-07-30@23:00:00.287 [brltty] input packet: 1B 0D 04 01 02 01 01 2016-07-30@23:00:00.287 [brltty] Firmware Version: 2.1.1 2016-07-30@23:00:00.319 [tune-thread] tone: MSecs:100 Freq:440 2016-07-30@23:00:00.340 [brltty] input packet: 1B 04 00 2016-07-30@23:00:02.321 [tune-thread] beeper disabled 2016-07-30@23:00:04.259 [brltty] popped command handler: message 2016-07-30@23:00:04.260 [brltty] popped command environment: message 2016-07-30@23:00:04.260 [brltty] server: api link 2016-07-30@23:00:04.260 [brltty] report listener registered: 0: brlapi_handleReports 2016-07-30@23:00:04.260 [brltty] output packet: sent: 1B 02 20 0E 09 17 11 11 1D 00 1D 15 1E 00 0A 1D 00 1E 11 2D 1E 00 0D 15 19 11 00 00 00 00 00 00 00 00 00 2016-07-30@23:00:04.326 [server-main] BrlAPI connection fd=22 accepted: local <unnamed> 2016-07-30@23:00:04.326 [server-main] server: authorization key loaded 2016-07-30@23:00:04.326 [server-main] server: received GetDriverName request on fd 22 2016-07-30@23:00:04.326 [server-main] server: received GetDisplaySize request on fd 22 2016-07-30@23:00:04.327 [server-main] server: received EnterRawMode request on fd 22 2016-07-30@23:00:04.327 [server-main] writing error 9 to 22 2016-07-30@23:00:04.327 [server-main] isRawCapable(trueBraille) not met: driver doesn't support Raw mode 2016-07-30@23:00:04.327 [server-main] server: error 9 on fd 22 2016-07-30@23:00:04.327 [server-main] server: received EnterTtyMode request on fd 22 2016-07-30@23:00:04.327 [server-main] adding range [0(0)..ffffffff(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [2000004c(0)..2000004c(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [20000000(0)..20000000(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [2000004a(0)..2000004a(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [20000073(0)..20000073(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [20000072(0)..20000072(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [2000004b(0)..2000004b(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [20000075(0)..20000075(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [20000074(0)..20000074(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [20000077(0)..20000077(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [20000076(0)..20000076(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [20060000(0)..2006ffff(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [20000046(0)..20000046(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [20000047(0)..20000047(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [201e0000(0)..201effff(ffffffff)] 2016-07-30@23:00:04.327 [server-main] removing range [20000078(0)..20000078(ffffffff)] 2016-07-30@23:00:04.328 [server-main] removing range [20000079(0)..20000079(ffffffff)] 2016-07-30@23:00:04.328 [server-main] removing range [20240000(0)..2024ffff(ffffffff)] 2016-07-30@23:00:04.328 [server-main] removing range [20230000(0)..2023ffff(ffffffff)] 2016-07-30@23:00:04.328 [server-main] removing range [20250000(0)..2025ffff(ffffffff)] 2016-07-30@23:00:04.328 [server-main] removing range [20260000(0)..2026ffff(ffffffff)] 2016-07-30@23:00:04.328 [server-main] removing range [201f0000(0)..201fffff(ffffffff)] 2016-07-30@23:00:04.328 [server-main] removing range [20220000(0)..2022ffff(ffffffff)] 2016-07-30@23:00:04.328 [server-main] server: taking control of tty 0000000000 (how=0) 2016-07-30@23:00:04.328 [server-main] server: received Write request on fd 22 2016-07-30@23:00:04.328 [server-main] lock descriptor allocated: charset 2016-07-30@23:00:04.328 [server-main] program exit event added: wchar-charset 2016-07-30@23:00:04.328 [server-main] program exit event added: charset-iconv 2016-07-30@23:00:04.328 [server-main] program exit event added: current-charset 2016-07-30@23:00:04.328 [server-main] server: charset UTF-8 2016-07-30@23:00:04.329 [brltty] output packet: sent: 1B 02 20 4F 17 11 0E 0E 00 01 00 03 17 01 0A 07 07 11 00 05 11 3D 00 1E 15 00 09 15 1D 1E 0A 1D 25 11 32 2016-07-30@23:00:09.169 [brltty] input packet: 1B 05 01 04 2016-07-30@23:00:09.169 [brltty] server: API got key 00 04 (press 1), thus client code 8000000000000004 2016-07-30@23:00:09.169 [brltty] program exit event added: command-queue 2016-07-30@23:00:09.169 [brltty] brl key press: Dot3 (Ctx:2 Grp:0 Num:4) -> NOOP (Cmd:000000) 2016-07-30@23:00:09.169 [brltty] command: 000000 (NOOP: do nothing) 2016-07-30@23:00:09.170 [brltty] server: command 00000000 -> client code 0000000020000000 2016-07-30@23:00:09.303 [brltty] input packet: 1B 06 01 04 2016-07-30@23:00:09.303 [brltty] server: API got key 00 04 (press 0), thus client code 0000000000000004 2016-07-30@23:00:09.303 [brltty] brl key release: Dot3 (Ctx:2 Grp:0 Num:4) -> PASSDOTS (Cmd:002204) 2016-07-30@23:00:09.303 [brltty] command: 002204 (PASSDOTS: type braille dots [3]) 2016-07-30@23:00:09.303 [brltty] server: command 00002204 -> client code 0000000020220004 2016-07-30@23:00:09.303 [brltty] server: command 00002204 -> client code 0000000000000027 2016-07-30@23:00:09.303 [brltty] server: transmitting accepted command 2204 as client code 0000000000000027 2016-07-30@23:00:09.303 [brltty] server: writing key 00000000 27000000 2016-07-30@23:00:09.304 [server-main] server: received LeaveTtyMode request on fd 22 2016-07-30@23:00:09.304 [server-main] server: releasing tty 0000000000 2016-07-30@23:00:09.304 [brltty] output packet: sent: 1B 02 20 0E 09 17 11 11 1D 00 1D 15 1E 00 0A 1D 00 1E 11 2D 1E 00 0D 15 19 11 00 00 00 00 00 00 00 00 00 2016-07-30@23:00:09.305 [server-main] server: closing connection on fd 22 2016-07-30@23:00:16.339 [brltty] braille input monitor error 5: Input/output error. 2016-07-30@23:00:16.339 [brltty] activity action request: braille-driver: stop 2016-07-30@23:00:16.339 [brltty] activity state change: braille-driver: 9[stopping] 2016-07-30@23:00:16.339 [brltty] server: api unlink 2016-07-30@23:00:16.339 [brltty] report listener unregistered: 0: brlapi_handleReports 2016-07-30@23:00:16.342 [brltty] activity state change: braille-driver: 0[stopped] 2016-07-30@23:00:16.342 [tune-thread] beeper enabled 2016-07-30@23:00:16.342 [brltty] reinitializing braille driver 2016-07-30@23:00:16.342 [brltty] activity action request: braille-driver: start 2016-07-30@23:00:16.342 [brltty] activity state change: braille-driver: 4[preparing] 2016-07-30@23:00:16.342 [brltty] Braille Display Dimensions: 1 row, 1 column 2016-07-30@23:00:16.342 [brltty] regions: text=0.1 status=0.0 2016-07-30@23:00:16.342 [brltty] shifts: full=1 half=0 vertical=5 2016-07-30@23:00:16.343 [brltty] activity state change: braille-driver: 1[prepared] 2016-07-30@23:00:16.343 [tune-thread] tone: MSecs:60 Freq:329 2016-07-30@23:00:16.343 [brltty] activity state change: braille-driver: 2[scheduled] 2016-07-30@23:00:16.343 [brltty] activity state change: braille-driver: 6[starting] 2016-07-30@23:00:16.343 [brltty] checking braille device: usb: 2016-07-30@23:00:16.343 [brltty] performing braille driver autodetection 2016-07-30@23:00:16.343 [brltty] checking for braille driver: al 2016-07-30@23:00:16.343 [brltty] initializing braille driver: al -> usb: 2016-07-30@23:00:16.345 [brltty] braille driver initialization failed: al -> usb: 2016-07-30@23:00:16.345 [brltty] checking for braille driver: bm 2016-07-30@23:00:16.345 [brltty] initializing braille driver: bm -> usb: 2016-07-30@23:00:16.346 [brltty] braille driver initialization failed: bm -> usb: 2016-07-30@23:00:16.347 [brltty] checking for braille driver: eu 2016-07-30@23:00:16.348 [brltty] initializing braille driver: eu -> usb: 2016-07-30@23:00:16.348 [brltty] braille driver initialization failed: eu -> usb: 2016-07-30@23:00:16.348 [brltty] checking for braille driver: fs 2016-07-30@23:00:16.349 [brltty] initializing braille driver: fs -> usb: 2016-07-30@23:00:16.349 [brltty] braille driver initialization failed: fs -> usb: 2016-07-30@23:00:16.350 [brltty] checking for braille driver: hd 2016-07-30@23:00:16.350 [brltty] initializing braille driver: hd -> usb: 2016-07-30@23:00:16.350 [brltty] braille driver initialization failed: hd -> usb: 2016-07-30@23:00:16.351 [brltty] checking for braille driver: hm 2016-07-30@23:00:16.351 [brltty] initializing braille driver: hm -> usb: 2016-07-30@23:00:16.352 [brltty] braille driver initialization failed: hm -> usb: 2016-07-30@23:00:16.352 [brltty] checking for braille driver: ht 2016-07-30@23:00:16.352 [brltty] initializing braille driver: ht -> usb: 2016-07-30@23:00:16.354 [brltty] braille driver initialization failed: ht -> usb: 2016-07-30@23:00:16.354 [brltty] checking for braille driver: hw 2016-07-30@23:00:16.354 [brltty] initializing braille driver: hw -> usb: 2016-07-30@23:00:16.355 [brltty] braille driver initialization failed: hw -> usb: 2016-07-30@23:00:16.355 [brltty] checking for braille driver: mt 2016-07-30@23:00:16.356 [brltty] initializing braille driver: mt -> usb: 2016-07-30@23:00:16.356 [brltty] braille driver initialization failed: mt -> usb: 2016-07-30@23:00:16.356 [brltty] checking for braille driver: pg 2016-07-30@23:00:16.357 [brltty] initializing braille driver: pg -> usb: 2016-07-30@23:00:16.357 [brltty] braille driver initialization failed: pg -> usb: 2016-07-30@23:00:16.358 [brltty] checking for braille driver: pm 2016-07-30@23:00:16.358 [brltty] initializing braille driver: pm -> usb: 2016-07-30@23:00:16.359 [brltty] braille driver initialization failed: pm -> usb: 2016-07-30@23:00:16.359 [brltty] checking for braille driver: sk 2016-07-30@23:00:16.359 [brltty] initializing braille driver: sk -> usb: 2016-07-30@23:00:16.360 [brltty] braille driver initialization failed: sk -> usb: 2016-07-30@23:00:16.360 [brltty] checking for braille driver: vo 2016-07-30@23:00:16.360 [brltty] initializing braille driver: vo -> usb: 2016-07-30@23:00:16.361 [brltty] braille driver initialization failed: vo -> usb: 2016-07-30@23:00:16.361 [brltty] braille driver not found 2016-07-30@23:00:16.361 [brltty] checking braille device: bluetooth:00:25:EC:01:8D:EB 2016-07-30@23:00:16.361 [brltty] hci_get_route error 19: No such device. 2016-07-30@23:00:16.361 [brltty] performing braille driver autodetection 2016-07-30@23:00:16.361 [brltty] checking for braille driver: np 2016-07-30@23:00:16.362 [brltty] initializing braille driver: np -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@23:00:16.362 [brltty] braille driver initialization failed: np -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@23:00:16.362 [brltty] checking for braille driver: ht 2016-07-30@23:00:16.362 [brltty] initializing braille driver: ht -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@23:00:16.363 [brltty] braille driver initialization failed: ht -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@23:00:16.363 [brltty] checking for braille driver: al 2016-07-30@23:00:16.363 [brltty] initializing braille driver: al -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@23:00:16.363 [brltty] L2CAP connect error 113: No route to host. 2016-07-30@23:00:16.363 [brltty] braille driver initialization failed: al -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@23:00:16.363 [brltty] checking for braille driver: bm 2016-07-30@23:00:16.364 [brltty] initializing braille driver: bm -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@23:00:16.364 [brltty] L2CAP connect error 113: No route to host. 2016-07-30@23:00:16.364 [brltty] braille driver initialization failed: bm -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@23:00:16.364 [brltty] braille driver not found 2016-07-30@23:00:16.364 [brltty] checking braille device: bluetooth:00:17:91:04:7D:10 2016-07-30@23:00:16.364 [brltty] hci_get_route error 19: No such device. 2016-07-30@23:00:16.364 [brltty] performing braille driver autodetection 2016-07-30@23:00:16.364 [brltty] checking for braille driver: np 2016-07-30@23:00:16.365 [brltty] initializing braille driver: np -> bluetooth:00:17:91:04:7D:10 2016-07-30@23:00:16.365 [brltty] braille driver initialization failed: np -> bluetooth:00:17:91:04:7D:10 2016-07-30@23:00:16.365 [brltty] checking for braille driver: ht 2016-07-30@23:00:16.365 [brltty] initializing braille driver: ht -> bluetooth:00:17:91:04:7D:10 2016-07-30@23:00:16.366 [brltty] braille driver initialization failed: ht -> bluetooth:00:17:91:04:7D:10 2016-07-30@23:00:16.366 [brltty] checking for braille driver: al 2016-07-30@23:00:16.366 [brltty] initializing braille driver: al -> bluetooth:00:17:91:04:7D:10 2016-07-30@23:00:16.369 [brltty] L2CAP connect error 113: No route to host. 2016-07-30@23:00:16.369 [brltty] braille driver initialization failed: al -> bluetooth:00:17:91:04:7D:10 2016-07-30@23:00:16.369 [brltty] checking for braille driver: bm 2016-07-30@23:00:16.370 [brltty] initializing braille driver: bm -> bluetooth:00:17:91:04:7D:10 2016-07-30@23:00:16.370 [brltty] L2CAP connect error 113: No route to host. 2016-07-30@23:00:16.370 [brltty] braille driver initialization failed: bm -> bluetooth:00:17:91:04:7D:10 2016-07-30@23:00:16.370 [brltty] braille driver not found 2016-07-30@23:00:16.370 [brltty] activity action failed: braille-driver: start 2016-07-30@23:00:16.370 [brltty] activity state change: braille-driver: 2[scheduled] 2016-07-30@23:00:16.405 [tune-thread] tone: MSecs:60 Freq:220 2016-07-30@23:00:18.405 [tune-thread] beeper disabled 2016-07-30@23:00:18.669 [brltty] control[console] error 5: Input/output error. 2016-07-30@23:00:18.669 [brltty] device opened: /dev/tty1: fd=20 2016-07-30@23:00:18.712 [brltty] stopping program components 2016-07-30@23:00:18.712 [brltty] stopping program component: command-queue 2016-07-30@23:00:18.712 [brltty] stopping program component: current-charset 2016-07-30@23:00:18.712 [brltty] stopping program component: charset-iconv 2016-07-30@23:00:18.712 [brltty] stopping program component: wchar-charset 2016-07-30@23:00:18.712 [brltty] stopping program component: console-stream 2016-07-30@23:00:18.712 [brltty] stopping program component: alert-tunes 2016-07-30@23:00:18.714 [brltty] stopping program component: sorted-keyboard-functions 2016-07-30@23:00:18.715 [brltty] stopping program component: sorted-command-table 2016-07-30@23:00:18.715 [brltty] stopping program component: bluetooth-device-queue 2016-07-30@23:00:18.715 [brltty] stopping program component: sessions 2016-07-30@23:00:18.715 [brltty] popped command handler: API 2016-07-30@23:00:18.715 [brltty] popped command handler: custom 2016-07-30@23:00:18.715 [brltty] popped command handler: screen 2016-07-30@23:00:18.715 [brltty] popped command handler: navigation 2016-07-30@23:00:18.715 [brltty] popped command handler: input 2016-07-30@23:00:18.715 [brltty] report listener unregistered: 0: inputCommandDataResetListener 2016-07-30@23:00:18.715 [brltty] popped command handler: keycodes 2016-07-30@23:00:18.715 [brltty] report listener unregistered: 0: keycodeCommandDataResetListener 2016-07-30@23:00:18.715 [brltty] popped command handler: touch 2016-07-30@23:00:18.715 [brltty] report listener unregistered: 3: brailleWindowUpdatedListener 2016-07-30@23:00:18.715 [brltty] popped command handler: toggle 2016-07-30@23:00:18.715 [brltty] popped command handler: preferences 2016-07-30@23:00:18.716 [brltty] popped command handler: clipboard 2016-07-30@23:00:18.716 [brltty] popped command handler: speech 2016-07-30@23:00:18.716 [brltty] popped command handler: learn 2016-07-30@23:00:18.716 [brltty] popped command handler: miscellaneous 2016-07-30@23:00:18.716 [brltty] popped command handler: unhandled 2016-07-30@23:00:18.716 [brltty] popped command environment: main 2016-07-30@23:00:18.716 [brltty] stopping program component: speech-driver 2016-07-30@23:00:18.716 [brltty] activity action request: speech-driver: stop 2016-07-30@23:00:18.716 [brltty] activity state change: speech-driver: 9[stopping] 2016-07-30@23:00:18.716 [brltty] activity state change: speech-driver: 0[stopped] 2016-07-30@23:00:18.716 [brltty] stopping program component: speech-data 2016-07-30@23:00:18.716 [brltty] stopping program component: braille-driver 2016-07-30@23:00:18.717 [brltty] activity action request: braille-driver: stop 2016-07-30@23:00:18.717 [brltty] activity state change: braille-driver: 1[prepared] 2016-07-30@23:00:18.717 [brltty] activity state change: braille-driver: 0[stopped] 2016-07-30@23:00:18.717 [brltty] stopping program component: braille-data 2016-07-30@23:00:18.717 [brltty] stopping program component: api-server 2016-07-30@23:00:18.717 [server-main] select: Interrupted system call 2016-07-30@23:00:18.717 [server-main] server: server thread finished 2016-07-30@23:00:18.717 [brltty] stopping program component: address-table 2016-07-30@23:00:18.717 [brltty] stopping program component: screen-driver 2016-07-30@23:00:18.717 [brltty] activity action request: screen-driver: stop 2016-07-30@23:00:18.718 [brltty] activity state change: screen-driver: 9[stopping] 2016-07-30@23:00:18.718 [brltty] report listener unregistered: 1: lxBrailleOfflineListener 2016-07-30@23:00:18.896 [brltty] activity state change: screen-driver: 0[stopped] 2016-07-30@23:00:18.896 [brltty] stopping program component: keyboard-table 2016-07-30@23:00:18.896 [brltty] stopping program component: contraction-table 2016-07-30@23:00:18.896 [brltty] stopping program component: attributes-table 2016-07-30@23:00:18.896 [brltty] stopping program component: text-table 2016-07-30@23:00:18.896 [brltty] stopping program component: tunes 2016-07-30@23:00:18.896 [tune-thread] tune thread state change: 3 -> 4 2016-07-30@23:00:18.896 [brltty] tune thread state change: 4 -> 5 2016-07-30@23:00:18.896 [brltty] stopping program component: screen-data 2016-07-30@23:00:18.896 [brltty] destructing special screen: help 2016-07-30@23:00:18.896 [brltty] stopping program component: pid-file 2016-07-30@23:00:18.896 [brltty] stopping program component: log
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
