The command line in the systemd brltty.service file starts with the command line switch -q /sbin/brltty -c -q -P /run/brltty.pid When I remove the -q switch to get the log file, brltty seems to crash shortly after it connects to the bluetooth braille display.
The log file is attached. On Fri, Jul 29, 2016 at 3:56 PM, Dave Mielke <d...@mielke.cc> wrote: > [quoted lines by Michael Katzmann on 2016/07/29 at 12:12 -0400] > > >No it is started by systemd. I don't think this implementation (Raspbian) > >uses an init ram disk.. > > Are you able to capture a debug log? If so, make sure you have the log file > written to a location that'd be mounted very early - maybe right under > root in > order to be sure. Add these two lines to your brltty.conf: > > log-file /brltty.log > log-level debug,inpkts,outpkts,brlkeys,brldrv > > -- > Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of > God. > Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ > EMail: d...@mielke.cc | Canada K2A 1H7 | http://FamilyRadio.org/ > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: BRLTTY@mielke.cc > For general information, go to: http://mielke.cc/mailman/listinfo/brltty >
2016-07-30@02:21:03.676 [brltty] pushed command environment: initial 2016-07-30@02:21:03.676 [brltty] BRLTTY 5.2dev rev BRLTTY-5.1-794-g565e9b1b [http://brltty.com] 2016-07-30@02:21:03.678 [brltty] program exit event added: screen-data 2016-07-30@02:21:03.678 [brltty] Working Directory: / 2016-07-30@02:21:03.678 [brltty] Writable Directory: /var/run/brltty 2016-07-30@02:21:03.678 [brltty] Configuration File: /etc/brltty.conf 2016-07-30@02:21:03.678 [brltty] Preferences File: brltty.prefs 2016-07-30@02:21:03.678 [brltty] regions: text=0.0 status=0.0 2016-07-30@02:21:03.678 [brltty] shifts: full=1 half=0 vertical=5 2016-07-30@02:21:03.679 [brltty] Drivers Directory: /lib/brltty 2016-07-30@02:21:03.679 [brltty] Tables Directory: /etc/brltty 2016-07-30@02:21:03.679 [brltty] checking for text table: /etc/brltty/Text/en_GB.ttb 2016-07-30@02:21:03.679 [brltty] compiling text table: /etc/brltty/Text/en_GB.ttb 2016-07-30@02:21:03.679 [brltty] file opened: /etc/brltty/Text/en_GB.ttb fd=4 2016-07-30@02:21:03.679 [brltty] including data file: /etc/brltty/Text/en_GB.ttb 2016-07-30@02:21:03.679 [brltty] file opened: /etc/brltty/Text/ltr-latin.tti fd=5 2016-07-30@02:21:03.679 [brltty] including data file: /etc/brltty/Text/ltr-latin.tti 2016-07-30@02:21:03.690 [brltty] file opened: /etc/brltty/Text/ctl-latin.tti fd=5 2016-07-30@02:21:03.690 [brltty] including data file: /etc/brltty/Text/ctl-latin.tti 2016-07-30@02:21:03.692 [brltty] file opened: /etc/brltty/Text/common.tti fd=5 2016-07-30@02:21:03.692 [brltty] including data file: /etc/brltty/Text/common.tti 2016-07-30@02:21:03.692 [brltty] file opened: /etc/brltty/Text/spaces.tti fd=6 2016-07-30@02:21:03.692 [brltty] including data file: /etc/brltty/Text/spaces.tti 2016-07-30@02:21:03.693 [brltty] file opened: /etc/brltty/Text/boxes.tti fd=6 2016-07-30@02:21:03.693 [brltty] including data file: /etc/brltty/Text/boxes.tti 2016-07-30@02:21:03.695 [brltty] file opened: /etc/brltty/Text/blocks.tti fd=6 2016-07-30@02:21:03.695 [brltty] including data file: /etc/brltty/Text/blocks.tti 2016-07-30@02:21:03.695 [brltty] Text Table: en_GB 2016-07-30@02:21:03.695 [brltty] program exit event added: text-table 2016-07-30@02:21:03.695 [brltty] Attributes Table: left_right 2016-07-30@02:21:03.695 [brltty] program exit event added: attributes-table 2016-07-30@02:21:03.695 [brltty] program exit event added: contraction-table 2016-07-30@02:21:03.695 [brltty] compiling contraction table: /etc/brltty/Contraction/-P.ctb 2016-07-30@02:21:03.696 [brltty] cannot open file: /etc/brltty/Contraction/-P.ctb: No such file or directory 2016-07-30@02:21:03.696 [brltty] cannot compile contraction table: /etc/brltty/Contraction/-P.ctb 2016-07-30@02:21:03.696 [brltty] Contraction Table: -P 2016-07-30@02:21:03.696 [brltty] Keyboard Property: type= 2016-07-30@02:21:03.696 [brltty] Keyboard Property: vendor= 2016-07-30@02:21:03.696 [brltty] Keyboard Property: product= 2016-07-30@02:21:03.696 [brltty] program exit event added: keyboard-table 2016-07-30@02:21:03.696 [brltty] Keyboard Table: none 2016-07-30@02:21:03.696 [brltty] program exit event added: screen-driver 2016-07-30@02:21:03.696 [brltty] activity action request: screen-driver: start 2016-07-30@02:21:03.696 [brltty] activity state change: screen-driver: 4[preparing] 2016-07-30@02:21:03.696 [brltty] activity state change: screen-driver: 1[prepared] 2016-07-30@02:21:03.696 [brltty] activity state change: screen-driver: 2[scheduled] 2016-07-30@02:21:03.696 [brltty] BrlAPI Server: release 0.6.2 2016-07-30@02:21:03.696 [brltty] API Parameter: auth= 2016-07-30@02:21:03.696 [brltty] API Parameter: host= 2016-07-30@02:21:03.696 [brltty] API Parameter: stacksize= 2016-07-30@02:21:03.696 [brltty] program exit event added: address-table 2016-07-30@02:21:03.697 [brltty] program exit event added: api-server 2016-07-30@02:21:03.697 [brltty] program exit event added: braille-data 2016-07-30@02:21:03.697 [brltty] program exit event added: braille-driver 2016-07-30@02:21:03.697 [brltty] activity action request: braille-driver: start 2016-07-30@02:21:03.697 [brltty] activity state change: braille-driver: 4[preparing] 2016-07-30@02:21:03.697 [brltty] Braille Display Dimensions: 1 row, 1 column 2016-07-30@02:21:03.697 [brltty] regions: text=0.1 status=0.0 2016-07-30@02:21:03.697 [brltty] shifts: full=1 half=0 vertical=5 2016-07-30@02:21:03.697 [brltty] activity state change: braille-driver: 1[prepared] 2016-07-30@02:21:03.697 [brltty] activity state change: braille-driver: 2[scheduled] 2016-07-30@02:21:03.697 [brltty] program exit event added: speech-data 2016-07-30@02:21:03.697 [brltty] program exit event added: speech-driver 2016-07-30@02:21:03.697 [brltty] activity action request: speech-driver: start 2016-07-30@02:21:03.697 [brltty] activity state change: speech-driver: 4[preparing] 2016-07-30@02:21:03.698 [brltty] activity state change: speech-driver: 1[prepared] 2016-07-30@02:21:03.698 [brltty] activity state change: speech-driver: 2[scheduled] 2016-07-30@02:21:03.698 [brltty] Speech Input: none 2016-07-30@02:21:03.698 [brltty] program exit event added: sessions 2016-07-30@02:21:03.698 [brltty] pushed command environment: main 2016-07-30@02:21:03.698 [brltty] pushed command handler: unhandled 2016-07-30@02:21:03.698 [brltty] pushed command handler: miscellaneous 2016-07-30@02:21:03.698 [brltty] pushed command handler: learn 2016-07-30@02:21:03.698 [brltty] pushed command handler: speech 2016-07-30@02:21:03.698 [brltty] pushed command handler: clipboard 2016-07-30@02:21:03.698 [brltty] pushed command handler: preferences 2016-07-30@02:21:03.698 [brltty] pushed command handler: toggle 2016-07-30@02:21:03.698 [brltty] pushed command handler: touch 2016-07-30@02:21:03.698 [brltty] report listener registered: 0: keycodeCommandDataResetListener 2016-07-30@02:21:03.698 [brltty] pushed command handler: keycodes 2016-07-30@02:21:03.698 [brltty] report listener registered: 0: inputCommandDataResetListener 2016-07-30@02:21:03.698 [brltty] pushed command handler: input 2016-07-30@02:21:03.698 [brltty] pushed command handler: navigation 2016-07-30@02:21:03.698 [brltty] pushed command handler: screen 2016-07-30@02:21:03.698 [brltty] pushed command handler: custom 2016-07-30@02:21:03.699 [brltty] activity state change: screen-driver: 6[starting] 2016-07-30@02:21:03.699 [brltty] checking for screen driver: lx 2016-07-30@02:21:03.699 [brltty] initializing screen driver: lx 2016-07-30@02:21:03.700 [brltty] device directory: /dev 2016-07-30@02:21:03.700 [brltty] checking screen device: /dev/vcsa 2016-07-30@02:21:03.700 [brltty] screen device: vcsa 2016-07-30@02:21:03.700 [brltty] checking console device: /dev/tty0 2016-07-30@02:21:03.700 [brltty] console device: tty0 2016-07-30@02:21:03.700 [brltty] device opened: /dev/vcsa: fd=7 2016-07-30@02:21:03.700 [brltty] screen opened: vcsa: fd=7 2016-07-30@02:21:03.700 [brltty] device opened: /dev/tty0: fd=9 2016-07-30@02:21:03.700 [brltty] console opened: tty0: fd=9 2016-07-30@02:21:03.700 [brltty] screen is monitorable: yes 2016-07-30@02:21:03.700 [brltty] Screen Font Map Size: 303 2016-07-30@02:21:03.700 [brltty] VGA Character Count: 256(small) 2016-07-30@02:21:03.700 [brltty] attributes masks: font=0000 unshifted=FF00 shifted=0000 2016-07-30@02:21:03.700 [brltty] starting host command: /sbin/modprobe 2016-07-30@02:21:03.707 [brltty] host command exit status: 0: /sbin/modprobe 2016-07-30@02:21:03.707 [brltty] activity state change: braille-driver: 6[starting] 2016-07-30@02:21:03.707 [brltty] checking braille device: usb: 2016-07-30@02:21:03.707 [brltty] performing braille driver autodetection 2016-07-30@02:21:03.707 [brltty] checking for braille driver: al 2016-07-30@02:21:03.708 [brltty] initializing braille driver: al -> usb: 2016-07-30@02:21:03.709 [brltty] braille driver initialization failed: al -> usb: 2016-07-30@02:21:03.710 [brltty] checking for braille driver: bm 2016-07-30@02:21:03.710 [brltty] initializing braille driver: bm -> usb: 2016-07-30@02:21:03.710 [brltty] braille driver initialization failed: bm -> usb: 2016-07-30@02:21:03.710 [brltty] checking for braille driver: eu 2016-07-30@02:21:03.711 [brltty] initializing braille driver: eu -> usb: 2016-07-30@02:21:03.711 [brltty] braille driver initialization failed: eu -> usb: 2016-07-30@02:21:03.711 [brltty] checking for braille driver: fs 2016-07-30@02:21:03.712 [brltty] initializing braille driver: fs -> usb: 2016-07-30@02:21:03.712 [brltty] braille driver initialization failed: fs -> usb: 2016-07-30@02:21:03.712 [brltty] checking for braille driver: hd 2016-07-30@02:21:03.713 [brltty] initializing braille driver: hd -> usb: 2016-07-30@02:21:03.713 [brltty] braille driver initialization failed: hd -> usb: 2016-07-30@02:21:03.713 [brltty] checking for braille driver: hm 2016-07-30@02:21:03.713 [brltty] initializing braille driver: hm -> usb: 2016-07-30@02:21:03.714 [brltty] braille driver initialization failed: hm -> usb: 2016-07-30@02:21:03.714 [brltty] checking for braille driver: ht 2016-07-30@02:21:03.714 [brltty] initializing braille driver: ht -> usb: 2016-07-30@02:21:03.715 [brltty] braille driver initialization failed: ht -> usb: 2016-07-30@02:21:03.715 [brltty] checking for braille driver: hw 2016-07-30@02:21:03.715 [brltty] initializing braille driver: hw -> usb: 2016-07-30@02:21:03.715 [brltty] braille driver initialization failed: hw -> usb: 2016-07-30@02:21:03.715 [brltty] checking for braille driver: mt 2016-07-30@02:21:03.716 [brltty] initializing braille driver: mt -> usb: 2016-07-30@02:21:03.716 [brltty] braille driver initialization failed: mt -> usb: 2016-07-30@02:21:03.716 [brltty] checking for braille driver: pg 2016-07-30@02:21:03.717 [brltty] initializing braille driver: pg -> usb: 2016-07-30@02:21:03.717 [brltty] braille driver initialization failed: pg -> usb: 2016-07-30@02:21:03.717 [brltty] checking for braille driver: pm 2016-07-30@02:21:03.718 [brltty] initializing braille driver: pm -> usb: 2016-07-30@02:21:03.718 [brltty] braille driver initialization failed: pm -> usb: 2016-07-30@02:21:03.718 [brltty] checking for braille driver: sk 2016-07-30@02:21:03.718 [brltty] initializing braille driver: sk -> usb: 2016-07-30@02:21:03.719 [brltty] braille driver initialization failed: sk -> usb: 2016-07-30@02:21:03.719 [brltty] checking for braille driver: vo 2016-07-30@02:21:03.719 [brltty] initializing braille driver: vo -> usb: 2016-07-30@02:21:03.720 [brltty] braille driver initialization failed: vo -> usb: 2016-07-30@02:21:03.720 [brltty] braille driver not found 2016-07-30@02:21:03.720 [brltty] checking braille device: bluetooth:00:25:EC:01:8D:EB 2016-07-30@02:21:03.720 [brltty] program exit event added: bluetooth-device-queue 2016-07-30@02:21:03.720 [brltty] activity state change: speech-driver: 6[starting] 2016-07-30@02:21:03.720 [brltty] no autodetectable speech drivers 2016-07-30@02:21:03.720 [brltty] checking for speech driver: no 2016-07-30@02:21:03.720 [brltty] initializing speech driver: no 2016-07-30@02:21:03.720 [brltty] Speech Driver: no [NoSpeech] 2016-07-30@02:21:03.720 [brltty] NoSpeech Speech Driver: 2016-07-30@02:21:03.721 [brltty] activity state change: speech-driver: 3[started] 2016-07-30@02:21:05.747 [brltty] performing braille driver autodetection 2016-07-30@02:21:05.747 [brltty] checking for braille driver: hw 2016-07-30@02:21:05.748 [brltty] initializing braille driver: hw -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@02:21:07.717 [brltty] output packet: sent: 1B 00 00 2016-07-30@02:21:07.720 [brltty] Screen Font Map Size: 303 2016-07-30@02:21:07.720 [brltty] VGA Character Count: 256(small) 2016-07-30@02:21:07.721 [brltty] attributes masks: font=0000 unshifted=FF00 shifted=0000 2016-07-30@02:21:07.721 [brltty] console number changed: 0 -> 7 2016-07-30@02:21:07.835 [brltty] input packet: 1B 01 03 00 02 20 2016-07-30@02:21:07.835 [brltty] detected Humanware device: model=2 cells=32 2016-07-30@02:21:07.835 [brltty] Braille Display Dimensions: 1 row, 32 columns 2016-07-30@02:21:07.835 [brltty] regions: text=0.32 status=0.0 2016-07-30@02:21:07.835 [brltty] shifts: full=32 half=16 vertical=5 2016-07-30@02:21:07.836 [brltty] Key Bindings: all 2016-07-30@02:21:07.836 [brltty] program exit event added: sorted-command-table 2016-07-30@02:21:07.836 [brltty] file opened: /etc/brltty/Input/hw/all.ktb fd=15 2016-07-30@02:21:07.836 [brltty] including data file: /etc/brltty/Input/hw/all.ktb 2016-07-30@02:21:07.837 [brltty] file opened: /etc/brltty/Input/hw/../chords.kti fd=16 2016-07-30@02:21:07.837 [brltty] including data file: /etc/brltty/Input/hw/../chords.kti 2016-07-30@02:21:07.839 [brltty] program exit event added: sorted-keyboard-functions 2016-07-30@02:21:07.839 [brltty] file opened: /etc/brltty/Input/hw/../bm/display6.kti fd=16 2016-07-30@02:21:07.839 [brltty] including data file: /etc/brltty/Input/hw/../bm/display6.kti 2016-07-30@02:21:07.841 [brltty] file opened: /etc/brltty/Input/hw/../bm/routing6.kti fd=16 2016-07-30@02:21:07.841 [brltty] including data file: /etc/brltty/Input/hw/../bm/routing6.kti 2016-07-30@02:21:07.860 [brltty] Key Table: /etc/brltty/Input/hw/all.ktb 2016-07-30@02:21:07.863 [brltty] report: 0: keycodeCommandDataResetListener 2016-07-30@02:21:07.863 [brltty] report: 0: inputCommandDataResetListener 2016-07-30@02:21:07.863 [brltty] Braille Driver: hw [HumanWare] 2016-07-30@02:21:07.863 [brltty] HumanWare Braille Driver: 2016-07-30@02:21:07.863 [brltty] Braille Device: bluetooth:00:25:EC:01:8D:EB 2016-07-30@02:21:07.863 [brltty] Old Preferences File: /etc/brltty-hw.prefs 2016-07-30@02:21:07.863 [brltty] cannot open file: /etc/brltty-hw.prefs: No such file or directory 2016-07-30@02:21:07.863 [brltty] regions: text=0.32 status=0.0 2016-07-30@02:21:07.863 [brltty] shifts: full=32 half=16 vertical=5 2016-07-30@02:21:07.864 [brltty] starting host command: /sbin/modprobe 2016-07-30@02:21:07.870 [brltty] host command exit status: 1: /sbin/modprobe 2016-07-30@02:21:07.870 [brltty] kernel module not installed: pcspkr 2016-07-30@02:21:07.870 [brltty] console opened: fd=15 2016-07-30@02:21:07.870 [brltty] program exit event added: console-stream 2016-07-30@02:21:07.870 [brltty] beeper enabled 2016-07-30@02:21:07.871 [brltty] program exit event added: tunes 2016-07-30@02:21:07.871 [brltty] tone: msec=60 note=64 2016-07-30@02:21:07.931 [brltty] tone: msec=100 note=69 2016-07-30@02:21:08.031 [brltty] activity state change: braille-driver: 3[started] 2016-07-30@02:21:08.031 [brltty] checking uinput device: /dev/uinput 2016-07-30@02:21:08.031 [brltty] uinput device: uinput 2016-07-30@02:21:08.031 [brltty] device opened: /dev/uinput: fd=16 2016-07-30@02:21:08.031 [brltty] uinput opened: uinput fd=16 2016-07-30@02:21:08.035 [brltty] report listener registered: 1: lxBrailleOfflineListener 2016-07-30@02:21:08.035 [brltty] Screen Driver: lx [Linux] 2016-07-30@02:21:08.035 [brltty] Linux Screen Driver: 2016-07-30@02:21:08.035 [brltty] Screen Parameter: charset= 2016-07-30@02:21:08.035 [brltty] Screen Parameter: hfb= 2016-07-30@02:21:08.035 [brltty] Screen Parameter: debugsfm= 2016-07-30@02:21:08.035 [brltty] activity state change: screen-driver: 3[started] 2016-07-30@02:21:08.036 [brltty] output packet: sent: 1B 02 20 0E 09 17 11 11 1D 00 1D 15 1E 00 0A 1D 00 1E 11 2D 1E 00 0D 15 19 11 00 00 00 00 00 00 00 00 00 2016-07-30@02:21:08.036 [brltty] pushed command environment: message 2016-07-30@02:21:08.036 [brltty] pushed command handler: message 2016-07-30@02:21:08.036 [brltty] output packet: sent: 1B 02 20 43 57 47 5E 5E 7D 00 31 32 23 19 11 27 00 17 11 27 00 43 57 47 5E 5E 7D 24 31 32 21 24 3B 2A 34 2016-07-30@02:21:09.932 [brltty] beeper disabled 2016-07-30@02:21:12.040 [brltty] output packet: sent: 1B 02 20 39 24 1B 31 2B 31 11 2A 03 21 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2016-07-30@02:21:23.469 [brltty] popped command handler: message 2016-07-30@02:21:23.469 [brltty] popped command environment: message 2016-07-30@02:21:23.469 [brltty] stopping program components 2016-07-30@02:21:23.469 [brltty] stopping program component: tunes 2016-07-30@02:21:23.469 [brltty] stopping program component: console-stream 2016-07-30@02:21:23.469 [brltty] stopping program component: sorted-keyboard-functions 2016-07-30@02:21:23.469 [brltty] stopping program component: sorted-command-table 2016-07-30@02:21:23.469 [brltty] stopping program component: bluetooth-device-queue 2016-07-30@02:21:23.469 [brltty] stopping program component: sessions 2016-07-30@02:21:23.469 [brltty] popped command handler: custom 2016-07-30@02:21:23.469 [brltty] popped command handler: screen 2016-07-30@02:21:23.469 [brltty] popped command handler: navigation 2016-07-30@02:21:23.469 [brltty] popped command handler: input 2016-07-30@02:21:23.469 [brltty] report listener unregistered: 0: inputCommandDataResetListener 2016-07-30@02:21:23.469 [brltty] popped command handler: keycodes 2016-07-30@02:21:23.470 [brltty] report listener unregistered: 0: keycodeCommandDataResetListener 2016-07-30@02:21:23.470 [brltty] popped command handler: touch 2016-07-30@02:21:23.470 [brltty] popped command handler: toggle 2016-07-30@02:21:23.470 [brltty] popped command handler: preferences 2016-07-30@02:21:23.470 [brltty] popped command handler: clipboard 2016-07-30@02:21:23.470 [brltty] popped command handler: speech 2016-07-30@02:21:23.470 [brltty] popped command handler: learn 2016-07-30@02:21:23.470 [brltty] popped command handler: miscellaneous 2016-07-30@02:21:23.470 [brltty] popped command handler: unhandled 2016-07-30@02:21:23.470 [brltty] popped command environment: main 2016-07-30@02:21:23.470 [brltty] stopping program component: speech-driver 2016-07-30@02:21:23.470 [brltty] activity action request: speech-driver: stop 2016-07-30@02:21:23.470 [brltty] activity state change: speech-driver: 9[stopping] 2016-07-30@02:21:23.470 [brltty] activity state change: speech-driver: 0[stopped] 2016-07-30@02:21:23.470 [brltty] stopping program component: speech-data 2016-07-30@02:21:23.470 [brltty] stopping program component: braille-driver 2016-07-30@02:21:23.471 [brltty] pushed command environment: message 2016-07-30@02:21:23.471 [brltty] pushed command handler: message 2016-07-30@02:21:23.471 [brltty] output packet: sent: 1B 02 20 43 57 47 5E 5E 7D 00 0E 1E 15 0F 0F 11 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2016-07-30@02:21:23.472 [brltty] popped command handler: message 2016-07-30@02:21:23.472 [brltty] popped command environment: message 2016-07-30@02:21:23.472 [brltty] activity action request: braille-driver: stop 2016-07-30@02:21:23.472 [brltty] activity state change: braille-driver: 9[stopping] 2016-07-30@02:21:23.473 [brltty] report: 1: lxBrailleOfflineListener 2016-07-30@02:21:23.475 [brltty] console opened: fd=10 2016-07-30@02:21:23.475 [brltty] program exit event added: console-stream 2016-07-30@02:21:23.475 [brltty] beeper enabled 2016-07-30@02:21:23.475 [brltty] program exit event added: tunes 2016-07-30@02:21:23.475 [brltty] tone: msec=60 note=64 2016-07-30@02:21:23.535 [brltty] tone: msec=60 note=57 2016-07-30@02:21:23.595 [brltty] activity state change: braille-driver: 0[stopped] 2016-07-30@02:21:23.595 [brltty] stopping program component: tunes 2016-07-30@02:21:23.595 [brltty] beeper disabled 2016-07-30@02:21:23.595 [brltty] stopping program component: console-stream 2016-07-30@02:21:23.595 [brltty] stopping program component: braille-data 2016-07-30@02:21:23.595 [brltty] stopping program component: api-server 2016-07-30@02:21:23.595 [brltty] stopping program component: address-table 2016-07-30@02:21:23.595 [server-main] select: Interrupted system call 2016-07-30@02:21:23.596 [brltty] stopping program component: screen-driver 2016-07-30@02:21:23.596 [brltty] activity action request: screen-driver: stop 2016-07-30@02:21:23.596 [brltty] activity state change: screen-driver: 9[stopping] 2016-07-30@02:21:23.596 [brltty] console closed: fd=9 2016-07-30@02:21:23.619 [brltty] screen closed: fd=7 2016-07-30@02:21:23.619 [brltty] report listener unregistered: 1: lxBrailleOfflineListener 2016-07-30@02:21:23.719 [brltty] activity state change: screen-driver: 0[stopped] 2016-07-30@02:21:23.720 [brltty] stopping program component: keyboard-table 2016-07-30@02:21:23.720 [brltty] stopping program component: contraction-table 2016-07-30@02:21:23.720 [brltty] stopping program component: attributes-table 2016-07-30@02:21:23.720 [brltty] stopping program component: text-table 2016-07-30@02:21:23.720 [brltty] stopping program component: screen-data 2016-07-30@02:21:23.720 [brltty] stopping program component: log
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
