If you did I wouldn’t get anything other than extended range temperature SFP. There’s also an activation code included with the SFP kit if I remember that you need.
Jon Langeler Michwave Technologies, Inc. > On Jun 26, 2020, at 3:09 PM, Josh Luthman <j...@imaginenetworksllc.com> wrote: > > > Can I use any SFP for the 450m 3ghz? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > >> On Fri, Jun 26, 2020 at 11:45 AM dave <dmilho...@wletc.com> wrote: >> We have installed dozens of these so I wanted to chime in. >> First off the difference on connecting up a 5Ghz vs 3.65ghz 450m >> 5Ghz will use only POE and has an aux port and a SFP port >> 3.65Ghz has a DC Port with 4pin connector. It also has a main,aux and SFP >> port. >> In order for any of them to use sync the main port must have Cambium Sync to >> it. >> >> We have started using the DC card packetflux has to power and control the >> 450m 3.65 radios. >> I have not had any issues by doing so, but we do run the main,aux and fiber >> ports for data and aux control. >> >> One of the thing we do to ensure long term reliability is installing the DC >> Lpus on all cables that use the Cat6 Armored cables >> we also install the DC Lpus for the DC ports. We also have inline fuses to >> each dc port. >> A tip is also add the cable ground kits if your running the armored cable up >> the tower. >> >> We see 300 to 400Mbs of traffic on a couple of our medusas that are cbsd's >> at 30mhz wide >> >> Fiber never looked so good on those ports LOL :) >> >> >> >> <Vcard.jpg> >>> On 6/25/20 11:45 AM, Steve Jones wrote: >>> Im confused as shit, and the cambium documentation is not clear. The >>> syncinjector cambium sync says 450m, but is the only 450m 5ghz? the 3ghz as >>> bestI can tell is a DC only product (even says something about sync over >>> power) >>> >>> so will the syncinjector still provide sync at the ethernet port, i just >>> turn off the power output on the syncinjector? or am i misunderstanding >>> this and the 450m 3ghz will take power via the ethernet port? >>> >>> forrest? >>> >>> >>> >>> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
