Just try it dude.. 450M's are cheap On Thu, Jun 25, 2020 at 1:39 PM Steve Jones <thatoneguyst...@gmail.com> wrote:
> wont sending POE power to the radio damage the port?, syncinjectors are > passive poe > > On Thu, Jun 25, 2020 at 12:21 PM Eric Muehleisen <ericm...@gmail.com> > wrote: > >> The RackInjector board naming scheme is confusing. He really needs a >> table matrix that breaks down what boards support what equipment and what >> jumpers and power requirements to use. I think this is why he was asking >> for help on his documentation. >> >> Power Injection for Cambium Sync = 450M & 450i. >> Power Injection + Canopy Sync = ePMP, 450 & 320 >> >> To power a 3ghz 450M you'll need a PDU card and a Power Injection for >> Cambium Sync to provide sync pulse. No PoE on the 3.65ghz 450M. You leave >> power enabled on the card/ports or sync will not work. >> >> >> >> On Thu, Jun 25, 2020 at 11:46 AM Steve Jones <thatoneguyst...@gmail.com> >> wrote: >> >>> Im confused as shit, and the cambium documentation is not clear. The >>> syncinjector cambium sync says 450m, but is the only 450m 5ghz? the 3ghz as >>> bestI can tell is a DC only product (even says something about sync over >>> power) >>> >>> so will the syncinjector still provide sync at the ethernet port, i just >>> turn off the power output on the syncinjector? or am i misunderstanding >>> this and the 450m 3ghz will take power via the ethernet port? >>> >>> forrest? >>> >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
