The RackInjector board naming scheme is confusing. He really needs a table matrix that breaks down what boards support what equipment and what jumpers and power requirements to use. I think this is why he was asking for help on his documentation.
Power Injection for Cambium Sync = 450M & 450i. Power Injection + Canopy Sync = ePMP, 450 & 320 To power a 3ghz 450M you'll need a PDU card and a Power Injection for Cambium Sync to provide sync pulse. No PoE on the 3.65ghz 450M. You leave power enabled on the card/ports or sync will not work. On Thu, Jun 25, 2020 at 11:46 AM Steve Jones <thatoneguyst...@gmail.com> wrote: > Im confused as shit, and the cambium documentation is not clear. The > syncinjector cambium sync says 450m, but is the only 450m 5ghz? the 3ghz as > bestI can tell is a DC only product (even says something about sync over > power) > > so will the syncinjector still provide sync at the ethernet port, i just > turn off the power output on the syncinjector? or am i misunderstanding > this and the 450m 3ghz will take power via the ethernet port? > > forrest? > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
