Can I use any SFP for the 450m 3ghz? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Jun 26, 2020 at 11:45 AM dave <dmilho...@wletc.com> wrote: > We have installed dozens of these so I wanted to chime in. > First off the difference on connecting up a 5Ghz vs 3.65ghz 450m > 5Ghz will use only POE and has an aux port and a SFP port > 3.65Ghz has a DC Port with 4pin connector. It also has a main,aux and SFP > port. > In order for any of them to use sync the main port must have Cambium Sync > to it. > > We have started using the DC card packetflux has to power and control the > 450m 3.65 radios. > I have not had any issues by doing so, but we do run the main,aux and > fiber ports for data and aux control. > > One of the thing we do to ensure long term reliability is installing the > DC Lpus on all cables that use the Cat6 Armored cables > we also install the DC Lpus for the DC ports. We also have inline fuses to > each dc port. > A tip is also add the cable ground kits if your running the armored cable > up the tower. > > We see 300 to 400Mbs of traffic on a couple of our medusas that are cbsd's > at 30mhz wide > > Fiber never looked so good on those ports LOL :) > > > > On 6/25/20 11:45 AM, Steve Jones wrote: > > Im confused as shit, and the cambium documentation is not clear. The > syncinjector cambium sync says 450m, but is the only 450m 5ghz? the 3ghz as > bestI can tell is a DC only product (even says something about sync over > power) > > so will the syncinjector still provide sync at the ethernet port, i just > turn off the power output on the syncinjector? or am i misunderstanding > this and the 450m 3ghz will take power via the ethernet port? > > forrest? > > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
