wont sending POE power to the radio damage the port?, syncinjectors are passive poe
On Thu, Jun 25, 2020 at 12:21 PM Eric Muehleisen <[email protected]> wrote: > The RackInjector board naming scheme is confusing. He really needs a table > matrix that breaks down what boards support what equipment and what jumpers > and power requirements to use. I think this is why he was asking for help > on his documentation. > > Power Injection for Cambium Sync = 450M & 450i. > Power Injection + Canopy Sync = ePMP, 450 & 320 > > To power a 3ghz 450M you'll need a PDU card and a Power Injection for > Cambium Sync to provide sync pulse. No PoE on the 3.65ghz 450M. You leave > power enabled on the card/ports or sync will not work. > > > > On Thu, Jun 25, 2020 at 11:46 AM Steve Jones <[email protected]> > wrote: > >> Im confused as shit, and the cambium documentation is not clear. The >> syncinjector cambium sync says 450m, but is the only 450m 5ghz? the 3ghz as >> bestI can tell is a DC only product (even says something about sync over >> power) >> >> so will the syncinjector still provide sync at the ethernet port, i just >> turn off the power output on the syncinjector? or am i misunderstanding >> this and the 450m 3ghz will take power via the ethernet port? >> >> forrest? >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
