** Bug watch added: Red Hat Bugzilla #1297803
https://bugzilla.redhat.com/show_bug.cgi?id=1297803
** Also affects: nautilus-image-converter (Fedora) via
https://bugzilla.redhat.com/show_bug.cgi?id=1297803
Importance: Unknown
Status: Unknown
--
You received this bug notification b
I am affected on Fedora 23 and EPEL 7 (testing update) also:
nautilus-image-converter-0.3.1-0.10.git430afce31.fc23
nautilus-image-converter-0.3.1-0.10.git430afce31.el7
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launch
@plotkin I do not know because I no longer have a copy of NX 3 that I
can install, and NoMachine removed it from their site.
I would look for a config file under /etc/ where you can define what the
GNOME session command is. If that doesn't work, look for an NX 3 script
under /usr/ (I am not sure w
@plotkin it should work as long as you tell NX 3 to run the command:
gnome-session --session=gnome-flashback --disable-acceleration-check
(Not tested)
You may have to put that line in a script, and tell NX 3 to launch that
script. That's what you will have to do with X2Go at least.
I wrote the l
On Tue, Nov 25, 2014 at 12:32 AM, Dmitry Shachnev wrote:
> No, I think Compiz won't work without hardware acceleration. So only for
> Metacity.
I just tested compiz 0.8.8.28.fc21 on Fedora 21 and I can confirm that
it does require the GLX extension.
So I agree that we should only add that option
On Sat, Sep 27, 2014 at 6:54 PM, Chris Good wrote:
> Would someone please explain what the problem is in simple terms?
> I thought it was that Unity in Ubuntu 14.04 requires 3D acceleration but if
> so, why does Unity work when run in VirtualBox without 3D acceleration, and
> also when run in a
I tested the new boxes, and there were no regressions for my use case.
:)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1354839
Title:
precise vagrant cloud-images still use raring HWE stack
To man
Thanks. I'll test it within the next few days.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1354839
Title:
precise vagrant cloud-images still use raring HWE stack
To manage notifications about thi
Keep in mind that these boxes do have the VirtualBox guest extensions
installed. The guest extensions are needed for being used with Vagrant.
If you have to revert to the precise HWE stack to make the guest
extensions work, that's fine with me.
--
You received this bug notification because you a
Public bug reported:
With the 64-bit Vagrant precise 20140807 image:
http://cloud-images.ubuntu.com/vagrant/precise/
I get this message on login:
Your current Hardware Enablement Stack (HWE) is no longer supported
since 2014-08-07. Security updates for critical parts (kernel
and graphics stack)
I reran the commands from the 2014-03-26 32-bit desktop CD (where the
VMware Tools were never installed) and after installing from that CD and
installing all available updates (without ever installing VMware Tools.)
There appears to be no difference.
>From the desktop CD:
root@ubuntu:~# lsusb
unab
I am going to try reformatting this VM with the latest nightly desktop
CD for the sake of testing. Still, here's the output with and without
VMware Tools as root:
With VMware tools installed:
root@executor-u-t:~# lsusb
unable to initialize libusb: -99
root@executor-u-t:~# /usr/lib/cups/backend/usb
I forgot to mention that I did install VMware Tools from this version of
VMware Workstation. I can try uninstalling them.
Also, "hpfax" crashes during each login too. Launchpad suggested I mark
it as a duplicate of bug 1007226, and I did. However, it may not be a
duplicate after all because 100722
@Till yes it happens every time I log in.
@pizza-7 Are you sure the 2nd command is correct?
I ran all 3 commands from gnome-terminal so I could copy & paste.
mike@executor-u-t:~$ lsusb
unable to initialize libusb: -99
mike@executor-u-t:~$ /usr/lib/cups/backend/usb
bash: /usr/lib/cups/backend/usb
Public bug reported:
This crash occurs as soon as I login to the Unity desktop.
I am running trusty under VMware Workstation 10.0.1 on a Windows 8.1
64-bit host. I have VMware Workstation's "Printer" feaure "connected",
so VMware is sharing my host OS's printers with the trusty VM.
ProblemType:
I just experiened this bug on Trusty 32-bit (latest updates as of
2014-03-15) after doing a software update. I have no 3rd party repos or
packages installed.
I am using VMware Workstation 10.0.1 with VMware's printer sharing
enabled. I have printers shared, but none of them are HP printers.
--
Y
Christopher M. Penalver (penalvch), Sorry, I cannot test because I gave
the netbook away as a gift.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/562043
Title:
[Acer Aspire 1410 (2009 netbook)] Bat
Also:
1. "Install the system" failed immediately after I selected to do a
normal install. Every additional time I ran it, it did the same.
2. I just re-ran the installer and it was completely successful.
The differences this time were that I selected "Command-line expert install"
and that I did
** Attachment added: "This log was generated by default by VirtualBox. I did
not enable any extra logging features in VBox."
https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1185844/+attachment/3690686/+files/VBox.log
--
You received this bug notification because you are a mem
Despite what the syslog message says at 14:09:10, /dev/saucy-server-vg was
created. Maybe it was created too late.
Also, I misspelled "saucy" earlier.
** Attachment added: "Despite the syslog message, /dev/saucy-server-vg was
created, possibly too late"
https://bugs.launchpad.net/ubuntu/+sou
** Attachment added: "The ssh console messed up after I hit continue"
https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1185844/+attachment/3690684/+files/2013-05-30%2010_10_46-%7E.png
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
** Attachment added: "hardware-summary.txt"
https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1185844/+attachment/3690682/+files/hardware-summary.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launch
** Attachment added: "partman.txt"
https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1185844/+attachment/3690683/+files/partman.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/11858
Public bug reported:
Setup:
VirtualBox 4.2.12 on a Windows 7 64-bit SP1 host
64-bit suacy "mini.iso" built on 2013-05-29
The error message:
"Installation step failed" under "Install the system".
See attached logs for further info.
What I did before it occurred:
I purposely selected to do an expe
To provide some context for the bugsquad:
FreeRDP rewrote a significant portion of their code between FreeRDP .0.8.2 (in
this Lucid bug) & FreeRDP 1.0.1 (in Precise), as explained in this link:
http://sourceforge.net/mailarchive/message.php?msg_id=27782543
I've never encountered this issue on Fre
** Attachment added: "The MBR partition table (64 bytes) of the affected SD
card."
https://bugs.launchpad.net/ubuntu/+source/gnome-disk-utility/+bug/1000472/+attachment/3149736/+files/partition-table
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subs
I can only click on this section of free space and the 3 primary
partitions before it.
** Attachment added: "gnome-disk-utlity bug.png"
https://bugs.launchpad.net/ubuntu/+source/gnome-disk-utility/+bug/1000472/+attachment/3149735/+files/gnome-disk-utlity%20bug.png
--
You received this bug no
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1000472
Title:
gnome-disk-utility won't let you select certain partitions
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubunt
Public bug reported:
I recently pulled a 2GB microSD card with a complex MBR partition table out of
my Chumby One (an embedded device), and put it into a USB 2.0 SD card reader on
my Ubuntu 12.04 AMD64 desktop/server. When I view the disk/reader in
gnome-disk-utlity, it won't let me click on ce
Mlaverdiere,
Yes, you do need to have the "samba" package installed because it
contains nmbd, the netbios P2P name lookup daemon. Otherwise, your
system tries only DNS for the name lookups, which fail for the
aforementioned reason.
I've become more experienced with Linux, and my recommended compl
** Visibility changed to: Public
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/437246
Title:
[Karmic] alarm-clock-applet crashes when clearing alarms
To manage notifications about this bug go to:
h
I am still experiencing this bug on Oneiric AMD64 with the latest
updates.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/470037
Title:
sudo tab autocomplete shows erratic behavior with spaces in nam
Martin Pitt, That worked!
Updating gnome-control-center & libgnome-control-center from oneiric's
1:3.2.0-0ubuntu6 to oneiric-proposed's 1:3.2.1-0ubuntu1 fixed this bug for me.
(Done on AMD64)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
I had to figure out how to use ubuntu-bug on the .crash file (because it wasn't
prompting to file a bug when it crashes anymore), but I believe I followed your
instructions to create bug 870435 .
https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/870435
--
You received this bug
** Attachment added: "From a previous time that it crashed."
https://bugs.launchpad.net/bugs/870435/+attachment/2525799/+files/gdb-gnome-contrtrol-center.txt
** Visibility changed to: Public
** Description changed:
gnome-control-center produces this crash when you go to open up "User
Acco
I'll do that when I get home at around 23:00 UTC; thanks Sebastian!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/854231
Title:
gnome-control-center crashed with SIGSEGV in g_str_hash()
To manage n
I've attached the gdb backtrace.
I'm not sure if I'm supposed to reopen this bug or not.
I noticed this:
um_password_dialog_new () at um-password-dialog.c:690
690 um-password-dialog.c: No such file or directory.
in um-password-dialog.c
** Attachment added: "gdb-gnome-contrtrol-cente
I believe I just experienced this same bug with up to date packages.
It happened when I went to open "User Accounts".
I've marked this as new.
** Changed in: gnome-control-center (Ubuntu)
Status: Invalid => New
--
You received this bug notification because you are a member of Ubuntu
Bugs,
*** This bug is a duplicate of bug 704667 ***
https://bugs.launchpad.net/bugs/704667
** Visibility changed to: Public
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/733620
Title:
update-manager
ybaruss:
I just reran the wireshark test on my maverick 10.10 (latest updates) 64-bit
system with a Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI
Express.
I got the following results, which are similar to before:
TCP checksums are about 90% incorrect with tx checksum on
TCP checksu
Hey Jeremy,
I installed the latest upstream linux-image package and its two headers
package. The linux image package is as follows:
linux-image-2.6.36-020636-generic_2.6.36-020636.201010210905_amd64.deb
I then ran the same test as before with this upstream kernel, and the
frequency problem is st
OK.
The log is attached.
Here's what I did:
1. Entered your command and started evolution.
2. Canceled out of the default request for google IMAP password.
3. Hit Send/Receive
4. Canceled out of the request for google IMAP password and purposely entered a
wrong password at the 1st prompt for my go
Present in Maverick too. I just changed it from Desktop Wall to Desktop
Cube and the crash occured.
--
simple-ccsm crashed with KeyError in AppearenceBoxChanged()
https://bugs.launchpad.net/bugs/506310
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
** Attachment added: "Dependencies.txt"
https://bugs.launchpad.net/bugs/642475/+attachment/1605906/+files/Dependencies.txt
** Attachment added: "ProcMaps.txt"
https://bugs.launchpad.net/bugs/642475/+attachment/1605907/+files/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
https://
Public bug reported:
Binary package hint: evolution
To recreate this issue:
1. Setup your gmail SMTP account (smtp.gmail.com) with SSL and authentication
type "Login."
2. Create a new email and send it via this gmail account.
3. When it prompts you for your password, enter an invalid one.
4. The
Public bug reported:
Binary package hint: cpufreqd
My system is running the latest version of maverick 64-bit. The CPU is
an intel core i5 750 (quad core, 4 threads) and my board is an Intel
DP55WG (P55 chipset). The cpu has a default maximum frequency of 2.67
ghz, ignoring the turbo frequency.
Public bug reported:
snes9x-gtk exhibits very high cpu usage all the time on my quad-core
core i5 system with a regular clock speed of 2.67 ghz. My system seems
to only run at 1.2 ghz during these benchmarks regularly, but it is
still very fast. I will create another bug report for the cpu frequen
** Attachment added: "Dependencies.txt"
https://bugs.launchpad.net/bugs/637828/+attachment/1581701/+files/Dependencies.txt
--
[maverick] snes9x-gtk exhibits very high cpu usage and possible slowdown
https://bugs.launchpad.net/bugs/637828
You received this bug notification because you are a m
I just tested out the following two kernels:
linux-image-2.6.35-02063504-generic_2.6.35-02063504.201008271919_amd64
linux-image-2.6.36-999-generic_2.6.36-999.201009121120_amd64
I experienced the same symptom I experienced previously:
"as it was shutting down, the Ubuntu splash screen was displayed
** Attachment added: "AcpiTables.txt"
https://bugs.launchpad.net/bugs/630002/+attachment/1541822/+files/AcpiTables.txt
** Attachment added: "AlsaDevices.txt"
https://bugs.launchpad.net/bugs/630002/+attachment/1541823/+files/AlsaDevices.txt
** Attachment added: "AplayDevices.txt"
http
Public bug reported:
I have an Intel DP55WG desktop motherboard. Whenever Ubuntu is supposed
to reboot the computer, the motherboard always has trouble rebooting.
Most of the time when rebooting, after Ubuntu shuts down the system's
power LED and fans go off for a few seconds. Then the system sta
I have an airlink AWLL6075 USB adapter with a RTL8191SU chipset.
With the test deb I can successfully scan for networks, but cannot
connect to my verizon actiontec MI424-WR Rev. D network with 64-bit WEP.
I also tried the firmware files from
rtl8192se_linux_2.6.0017.0507.2010.tar.gz package from
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/53303170/BootDmesg.txt
** Attachment added: "CurrentDmesg.txt"
http://launchpadlibrarian.net/53303171/CurrentDmesg.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/53303172/Dependencies.txt
** A
Public bug reported:
Binary package hint: mdadm
I've had this problem happen a few times in the past with previous versions of
Ubuntu. (I'm now on Lucid) I forget how I got rid of it then. What happened now
is a just added a couple of eSATA disks (/dev/sdd and /dev/sde) (they function
like reg
I tested this on another computer, one running lucid 64-bit with a Marvell
Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12).
I have observed the following:
TCP checksums are about 40% incorrect with tx checksum on
TCP checksums are about 25% incorrect with tx checksum off
U
I am running lucid 64-bit with a Broadcom Corporation NetXtreme BCM5722 Gigabit
Ethernet PCI Express.
I have observed the following:
TCP checksums are always about 1/3rd incorrect regardless of tx checksum
offloading
All UDP checksums are incorreft with tx checksum offloading
All UDP checksums ar
ghook's method work's erratically with lucid
I followed his instructions (it sounds more like the actual feature than a
workaround) by adding these lines to /etc/gdm/custom.conf
[daemon]
RemoteGreeter=/usr/lib/gdm/gdmlogin
[xdmcp]
Enable=true
Sure enough, I can connect to the server with Xming
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/43997092/Dependencies.txt
--
[Acer Aspire 1410 (2009 netbook)] Battery Life Significantly less than in
Windows (and worse in Lucid than in 9.10)
https://bugs.launchpad.net/bugs/562043
You received this bug notification bec
Public bug reported:
Binary package hint: acpid
My system is an Acer Aspire 1410 (2009 11.6" netbook, not the full sized
laptop released in 2005) with a Core 2 Solo @ 1.4 ghz.
Under Windows Vista or Windows 7, the battery life is roughly 6 hours
when idling with screen at moderate bringness and
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/43994070/Dependencies.txt
** Attachment added: "IpAddr.txt"
http://launchpadlibrarian.net/43994071/IpAddr.txt
** Attachment added: "IwConfig.txt"
http://launchpadlibrarian.net/43994072/IwConfig.txt
** Attachment adde
Public bug reported:
I have tested this on multiple systems with recent versions of lucid 64-bit. It
has been observed on both wired and wireless connections.
My current one:
Acer Aspire 1410
Lucid installed from daily-live cd from April 12th.
The simplest way to reproduce this is to go to your
Just thought I'd point out that wikipedia has a section on this practice by
ISPs.
http://en.wikipedia.org/wiki/DNS_hijacking#Use_by_ISPs
Also, my preferred workaround, either for individual machines by themselves, or
for entire networks, is to use a real public DNS service. The only one I know
I figured out what the problem was!
We are customer's of Comcast, a large American ISP, in State College,
Pennsylvania, USA.
They have DNS search redirection or whatever. EVERY hostname name is
resolved by them. If it isn't one on the public internet, they redirect
you to their web server with a
smbtree worked on my desktop (lucid beta2 x86-64 with updates as of this
moment.) BTW, ORPHEUS and MORPHEUS are indeed separate computers.
m...@telescreen:~$ smbtree --user=guest --no-pass
WORKGROUP
\\VERSIFICATOR MP560 series
cli_start_connection: failed to connect to VER
I have had issues like this for the last few releases. I am running
nightly Lucid 64-bit live ATM on a homogeneous (engineering fraternity)
network. I can view the names of workgroups, and access machines by ip
address in nautilus (generally) but nautilus can neither browse a
workgroup nor a machin
** Attachment added: "Casper.gz"
http://launchpadlibrarian.net/39872064/Casper.gz
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/39872065/Dependencies.txt
** Attachment added: "UbiquityDebug.gz"
http://launchpadlibrarian.net/39872066/UbiquityDebug.gz
** Attachmen
Public bug reported:
Binary package hint: ubiquity
Ubiquity in (Gnome) Ubuntu Lucid Alpha 3 states that Firefox 3.5 is going to be
installed during the slide show. However, Lucid now includes Firefox 3.6
I don't mean to nitpick, but this should be updated to avoid confusion.
I chose to update th
Public bug reported:
Binary package hint: nautilus
Right now, as seen in the attachment, one background is being imposed on
another background. You can find the two backgrounds in:
/usr/share/backgrounds/cosmos
I selected the cosmos slideshow for my background under the appearance
preferences.
** Attachment added: "The two background being combined"
http://launchpadlibrarian.net/35032075/Screenshot-1.png
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/35032077/Dependencies.txt
** Attachment added: "XsessionErrors.txt"
http://launchpadlibrarian.net/350320
** Attachment added: "Casper.gz"
http://launchpadlibrarian.net/34984757/Casper.gz
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/34984758/Dependencies.txt
** Attachment added: "UbiquityDebug.gz"
http://launchpadlibrarian.net/34984759/UbiquityDebug.gz
** Attachmen
Public bug reported:
Binary package hint: ubiquity
Normally Ubiquity presents a user with the suggested hard disk
configurations, and going to the manual partitioner is only an option.
If no hard disks are detected, Ubuntu instead takes the user to the manual
partitioner and does not make it cl
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/34924924/Dependencies.txt
** Attachment added: "XsessionErrors.txt"
http://launchpadlibrarian.net/34924925/XsessionErrors.txt
--
sudo tab autocomplete shows erratic behavior with spaces in names
https://bugs.launchpad.n
Public bug reported:
Binary package hint: bash-completion
I have observed this behavior on two machines running Ubuntu AMD64 9.10
To reproduce, open up a terminal with bash
Then go to a directory that contains a folder or directory with spaces in its
name.
Type "sudo ./" and then the first part
I've also experienced this same error message on AMD64.
--
One reports "Capabilitiesmismatch with server"
https://bugs.launchpad.net/bugs/466688
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lis
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/34192670/Dependencies.txt
** Attachment added: "XsessionErrors.txt"
http://launchpadlibrarian.net/34192671/XsessionErrors.txt
--
gtweakui-session error: cannot find the splash image
https://bugs.launchpad.net/bugs/45872
Public bug reported:
Binary package hint: gtweakui
In Karmic, gtweakui-session gives the following error on startup:
Error opening current splash image.
The current splash image filename is:
/usr/share/pixmaps/splash/ubuntu-splash.png
I see that under /usr/share/pixmaps, there is no "splash" fol
** Attachment added: "The PCF file which gives the error"
http://launchpadlibrarian.net/33097617/ISPtoPSUtest.pcf
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/33097618/Dependencies.txt
** Attachment added: "XsessionErrors.txt"
http://launchpadlibrarian.net/33097
Public bug reported:
Binary package hint: network-manager-vpnc
When I go to import my PCF file for network-manager-vpnc, it gives a
NMSettingIP4Config error (after bringing up the settings menu and
hitting OK.) Attached is the PCF file with the the groupPWD set to a
fake value (to protect the org
There is a similar problem with nautilus-filename-repairer.
m...@minitrue:~$ sudo apt-get install nautilus-filename-repairer
[sudo] password for mike:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may me
Here's my sample NM output from var/log/daemon.
Note that the first time it failed to connect and I do not know why.
Apr 6 09:45:06 emissary NetworkManager: Starting VPN service
'org.freedesktop.NetworkManager.vpnc'...
Apr 6 09:45:06 emissary NetworkManager: VPN service
'org.freedesktop.N
I can confirm this bug is present in Jaunty.
--
nm-vpnc and vpnc-connect produce different routing tables
https://bugs.launchpad.net/bugs/207506
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lis
It looks like after updating my system with the countless updates over
the last few days, gstreamer-properties no longer crashes. It still
fails to preview the camera with either v4l or v4l2. Actually, to be
more precise, one time it worked under v4l2 but only for a split-second.
Attached is what g
Public bug reported:
System:
Intrepid AMD64 with latest updates as of October 9th
Symptoms:
Apt should detect that both kfilereplace and kfilereplace-kde4 conflict. They
both at least provide the same file:
/usr/share/icons/hicolor/22x22/apps/kfilereplace.png
When you go to install both of them
I forgot to mention, this happens even when xserver-xorg-input-joystick
is not installed.
--
X restarts after button on gamepad is pressed
https://bugs.launchpad.net/bugs/272421
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-
I am experiencing this as well with my Nintendo64 gamepad/joystick on a USB
adapter.
Bus 002 Device 003: ID :0667 Prototype product Vendor ID WiseGroup Smart
Joy PSX, PS-PC Smart JoyPad
** Attachment added: "lshal.txt"
http://launchpadlibrarian.net/18022079/lshal.txt
--
X restarts afte
Based on Lamah's info, it sounds like there is no way we can fix it.
Still, I tried out rhythmbox on Intrepid Alpha 6 and it fails to connect
all the same without displaying any error message (that Apple makes
their shares incompatible with 3rd parties.) I believe it would be very
helpful for the a
Public bug reported:
System:
Asus F8SN-D1 Laptop with a Geforce 9500m GS
Fresh install of Ubuntu Intrepid Alpha 6 AMD64
Steps to reproduce:
Open up Synaptic package manager (and authenticate,) so as to lock the Apt
database.
Open up Jockey-GTK (hardware drivers GUI)
Chose to install the Nvidia 1
armin_somorjai:
First of all, if you are new to Linux, I would probably suggest just
installing nvidia-glx. Its features are not all that much less. The
manual installation process of the 100.14.19 requires moderate linux
experience.
Regardless, here is the other driver:
http://www.nvidia.com/obj
On Hardy x86, this bug is present with the following drivers directly from
NVIDIA:
169.07
169.12
173.08
It is not present with:
100.14.19 (the same driver as in gutsy.)
--
laptop monitor does not turn on after inactivity when using nvidia-glx-new
https://bugs.launchpad.net/bugs/190526
You receiv
Timo, this is occuring with the latest Nvidia driver, 169.12 (at least
for me and presumably waspbr.)
--
laptop monitor does not turn on after inactivity when using nvidia-glx-new
https://bugs.launchpad.net/bugs/190526
You received this bug notification because you are a member of Ubuntu
Bugs, wh
Correction, for me it seems like there is corruption rather than the
screen being turned off.
--
laptop monitor does not turn on after inactivity when using nvidia-glx-new
https://bugs.launchpad.net/bugs/190526
You received this bug notification because you are a member of Ubuntu
Bugs, which is s
I am experiencing this on my HP TX1000z (customized) laptop using the
Geforce 61050 go also.
This problems also occurs whenever I switch over to the console or when
it is shutting down.
Here are some other people noticing this problem.
http://ubuntuforums.org/showpost.php?p=4514822&postcount=697
I am also noticing this problem whenever the display is turned off, such
as by inactivity or by closing the lid. I then have to restart X. This
makes it a very serious problem for the casual user.
--
Nvidia Driver + Consolle ttyXX = Problem
https://bugs.launchpad.net/bugs/35930
You received this
BTW, I'm not sure if I am using vesafb or whatever. I am not using any
specific resolutions for the console, just everything set at the
default.
--
Nvidia Driver + Consolle ttyXX = Problem
https://bugs.launchpad.net/bugs/35930
You received this bug notification because you are a member of Ubuntu
** Attachment added: "Corrupt console with blue vertical lines."
http://launchpadlibrarian.net/12812140/Photo_032208_005.jpg
--
Nvidia Driver + Consolle ttyXX = Problem
https://bugs.launchpad.net/bugs/35930
You received this bug notification because you are a member of Ubuntu
Bugs, which is a
I think this problem is occurring again for those of us with HP pavilion
TX1000 series (TX1000z, TX1100 series, TX1200 series, and TX1300 series)
and probably the TX2000 series laptops/Tablet PCs.
Here is someone else who experienced the problem.
http://ubuntuforums.org/showpost.php?p=4514822&post
** Also affects: linux-restricted-modules-2.6.24 (Ubuntu)
Importance: Undecided
Status: New
--
Nvidia Driver + Consolle ttyXX = Problem
https://bugs.launchpad.net/bugs/35930
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ub
I need to correct myself. After installing the drivers and running the
graphical config program, I saw a copyright notice within it.
--
egalax touchscreeen driver do not work in hardy
https://bugs.launchpad.net/bugs/198911
You received this bug notification because you are a member of Ubuntu
Bugs
I think a very good solution is to get it into the backports.
--
Get Alien Arena 2008 (v7.0) into hardy
https://bugs.launchpad.net/bugs/200954
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists
I have some things to add.
First of all, it is the tx1000z series, and that includes all sorts of
tx1100, tx1200, and tx1300 series laptops/tablets.
Secondly, I can't seem to find a license or copyright notice or anything for
the driver. I hope it is public domain, but I am pretty sure that pack
1 - 100 of 144 matches
Mail list logo
