Hi Tom,
Le 23/04/2012 19:19, Tom Rini a écrit :
Hello,
The following changes since commit 5697158fd27c9cc938eb3e3308e3c1483a2a1ef8:
Tom Rini (1):
include/configs: Remove CONFIG_SYS_64BIT_STRTOUL
are available in the git repository at:
git://git.denx.de/u-boot-ti master
Nikita
Hi Andy,
> Those two patches have been combined together for easier review.
>
> Both fixes corner cases caught on the Samsung's GONI target.
> Namely:
> - lack of call to mmc_init with fat handling
> - Not setting MMC capabilities according to host capabilities
>
>
> Lukasz Majewski (2):
> mm
On 24 April 2012 20:44, Anatolij Gustschin wrote:
> Hi,
>
> On Tue, 24 Apr 2012 10:37:05 +0900
> Donghwa Lee wrote:
>
>> vl_bpix of vidinfo_t was changed proper value for u-boot.
>> It is used to multiple of 2 by using NBITS() macro.
>>
>> Signed-off-by: Donghwa Lee
>> Signed-off-by: Kyungmin Pa
Dear Albert,
The following changes since commit 6e7c76a15753f3a5e1b94df372392a08e4b11b02:
arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
(2012-04-23 09:15:23 -0700)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
Chander Kashyap (1):
s6e8ax0 panel init gamma value is changed because existing it was not
proper value for this panel.
Signed-off-by: Donghwa Lee
Signed-off-by: Kyungmin Park
Signed-off-by: Inki Dae
---
drivers/video/s6e8ax0.c |8
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers
From: Mike Frysinger
Merge our duplicate definitions with the common header.
Also fix drivers/usb/gadget/s3c_udc_otg_xfer_dma.c to
use min() instead of min_t() since we remove the latter
from compat.h.
Signed-off-by: Mike Frysinger
Signed-off-by: Anatolij Gustschin
---
v2:
- fix build breakag
> -Original Message-
> From: u-boot-boun...@lists.denx.de [mailto:u-boot-
> boun...@lists.denx.de] On Behalf Of Daniel Stodden
> Sent: 24 April 2012 11:37
> To: U-Boot
> Subject: [U-Boot] [PATCH] kwboot: Boot Marvell Kirkwood SoCs over a
> serial link.
Hi Daniel
Pls maintain change log,
Hi,
On Wed, 25 Apr 2012 17:04:39 +0900
Donghwa Lee wrote:
> s6e8ax0 panel init gamma value is changed because existing it was not
> proper value for this panel.
>
> Signed-off-by: Donghwa Lee
> Signed-off-by: Kyungmin Park
> Signed-off-by: Inki Dae
> ---
> drivers/video/s6e8ax0.c |8 +++
Hi Andy,
Le 25/04/2012 07:33, Andy Fleming a écrit :
The MAKEALL script cleverly runs make with the appropriate options
to use all of the cores on the system, but your average U-Boot build
can't make much use of more than a few cores. If you happen to have
a many-core server, your builds will l
This describes requirement of e500 and e500v2 processor to support external
debugger.
It also provide an insight of the configuration switch required and their
description.
Signed-off-by: Radu Lazarescu
Signed-off-by: Marius Grigoras
Signed-off-by: Prabhakar Kushwaha
---
Based upon git://git
Debugging of e500 and e500v1 processer requires MSR[DE] bit to be set always.
Where MSR = Machine State register
Make sure of MSR[DE] bit is set uniformaly across the different execution
address space i.e. AS0 and AS1.
Signed-off-by: Radu Lazarescu
Signed-off-by: Catalin Udma
Signed-off-by: Mar
Debugging of e500 and e500v1 processer requires debug exception vecter (IVPR +
IVOR15) to have valid and fetchable OP code.
While executing in translated space (AS=1), whenever a debug exception is
generated, the MSR[DS/IS] gets cleared i.e. AS=0 and the processor tries to
fetch an instruction fro
Update NAND code base to ovecome e500 and e500v2's second limitation i.e. IVPR
+ IVOR15 should be valid fetchable OP code address.
As NAND SPL does not compile vector table so making sure IVOR + IVOR15 points to
any fetchable valid data
Signed-off-by: Radu Lazarescu
Signed-off-by: Marius Grigora
P1010 and P1014 SoC has e500v2 processor.
And Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some
restrictions on external debugging (JTAG).
So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be
used during boot to work around the limitations.
Please refer
Drop mdelay() macros since we already have a common mdelay() func.
Signed-off-by: Anatolij Gustschin
---
drivers/block/sata_sil.c |1 -
drivers/video/da8xx-fb.c |1 -
2 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/drivers/block/sata_sil.c b/drivers/block/sata_sil.c
index
Hi,
On Wed, 16 Mar 2011 10:11:03 +0800
Shaohui Xie wrote:
> The tool can build u-boot image which can be used by PBL,
> run "make P4080DS_RAMBOOT_PBL" can make all works done,
> the default output image is u-boot.pbl, for more details
> please refer to doc/README.pblimage.
>
> Signed-off-by: Sh
panel_info data structure is global variable, so, I have initialized it
in board file. If it is initialized in init_panel_info() like existing,
it can't be used in drv_lcd_init() in common/lcd.c because
init_panel_info() is called after drv_lcd_init().
Signed-off-by: Donghwa Lee
Signed-off-by: Ky
>
> Debugging of e500 and e500v1 processer requires MSR[DE] bit to be set always.
> Where MSR = Machine State register
>
> Make sure of MSR[DE] bit is set uniformaly across the different execution
> address space i.e. AS0 and AS1.
Hi
We are trying to bring up our custom P2010 RDB based board. boo
From: Enric Balletbo i Serra
Based on commit cf073e49bc3502be1b48a0e3faf0cde9edbb89db for beagleboard
Using the new env import command it is possible to use plain text files instead
of script-images. Plain text files are much easier to handle.
E.g. If your boot.scr contains the following:
Dear Daniel Stodden,
In message <1335325799.8304.15.camel@ramone> you wrote:
>
> > Why not use something like:
> >
> > BIN_FILES-$(CONFIG_KIRKWOOD) += kwboot$(SFX)
>
> Huh?
>
> I don't know u-boot's build system very well, but normally CONFIG items
> are employed to keep the target lean. Where
From: Enric Balletbo i Serra
This patch changes the default mpurate variable from 500 to auto on
all IGEP boards, with this the default rate is autoselected.
Signed-off-by: Enric Balletbo i Serra
Signed-off-by: Anatolij Gustschin
---
v2:
- rebased on u-boot-ti/master.
include/configs/igep00
Hello,
On Wed, 25 May 2011 16:19:17 +0200
Enric Balletbo i Serra wrote:
> Hello,
>
> This is a couple of patches to update the support for IGEP boards, please
> consider to adding.
Sorry for very long delay. These patches needed rebasing, I've included
Tom in Cc for v2, so these patches hopefu
Dear Thirumalesha N,
In message
you wrote:
>
> Yes These frequency and flash base address are correct to my board.
> SMC2 pins PA9-TX and PA8-Rx,
> I Checked BRG and clock routing is matching to board.
Then you need a debugger.
> I have BDI 2000 tool, but its not connecting to board.
Th
Hello,
U-Boot v2012.04.01 has been released and is available from the git
repository and the FTP server.
Please update and use this bug fix release instead of v2012.04. It
fixes a nasty bug in the command line processing, which can cause
incorrect execution of commands and scripts.
Thanks.
Best
On 04/24/2012 11:05 PM, Andy Fleming wrote:
On Tue, Apr 24, 2012 at 10:48 PM, Prabhakar Kushwaha
wrote:
Hi,
On Wednesday 25 April 2012 02:50 AM, Andy Fleming wrote:
On Tue, Apr 24, 2012 at 4:10 PM, Scott Wood
wrote:
On 04/24/2012 03:45 PM, Andy Fleming wrote:
On Mon, Mar 26, 2012 at
On Wednesday 25 April 2012 04:11:41 Anatolij Gustschin wrote:
> From: Mike Frysinger
>
> Merge our duplicate definitions with the common header.
> Also fix drivers/usb/gadget/s3c_udc_otg_xfer_dma.c to
> use min() instead of min_t() since we remove the latter
> from compat.h.
>
> Signed-off-by: M
Vikram Narayanan (4):
patman: Fix a typo error
patman: Add meaningful statements instead of blah blah
patman: Change the location of patman path in README
patman: Handle searching of patman config
tools/patman/README | 17 -
tools/patman/settings.py | 26
Signed-off-by: Vikram Narayanan
Cc: Simon Glass
---
tools/patman/README |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/tools/patman/README b/tools/patman/README
index 587c97f..d9820ab 100644
--- a/tools/patman/README
+++ b/tools/patman/README
@@ -197,7 +197,7 @@ patch
Signed-off-by: Vikram Narayanan
Cc: Simon Glass
---
tools/patman/README |9 -
1 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/tools/patman/README b/tools/patman/README
index d9820ab..d98f081 100644
--- a/tools/patman/README
+++ b/tools/patman/README
@@ -132,16 +132,15
Signed-off-by: Vikram Narayanan
Cc: Simon Glass
---
tools/patman/README |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/patman/README b/tools/patman/README
index d98f081..4913510 100644
--- a/tools/patman/README
+++ b/tools/patman/README
@@ -93,17 +93,17 @@ H
patman shouts when it couldn't find a $(HOME)/.config/patman file.
Also, it couldn't create patch files without the above config file.
Handle it in a sane way by creating a new one for the user.
Signed-off-by: Vikram Narayanan
Cc: Simon Glass
---
tools/patman/settings.py | 26 +++
Hi Marek,
> This patch set provides support for composite gadget framework.
> Files from Linux kernel (2.6.36) - namely composite.{c|h} have been
> ported to u-boot.
>
> Code supporting this framework has been added to gadget.h and
> Samsung's UDC driver as well.
>
> ---
> Changes for v2:
>
Hi Anatolij,
> From: Mike Frysinger
>
> Merge our duplicate definitions with the common header.
> Also fix drivers/usb/gadget/s3c_udc_otg_xfer_dma.c to
> use min() instead of min_t() since we remove the latter
> from compat.h.
Yes. the include/usb/lin_gadget_compat.h layer.
Good idea to provide
Dear Lukasz Majewski,
> Hi Marek,
>
> > This patch set provides support for composite gadget framework.
> > Files from Linux kernel (2.6.36) - namely composite.{c|h} have been
> > ported to u-boot.
> >
> > Code supporting this framework has been added to gadget.h and
> > Samsung's UDC driver as
Hi Daniel,
On Wed, Apr 25, 2012 at 02:34:07PM +0200, Wolfgang Denk wrote:
> In message <1335325799.8304.15.camel@ramone> you wrote:
> >
> > > Why not use something like:
> > >
> > > BIN_FILES-$(CONFIG_KIRKWOOD) += kwboot$(SFX)
> >
> > Huh?
> >
> > I don't know u-boot's build system very well, b
From: Peter Meerwald
SPL boot outputs a 'timed out in wait_for_bb: IC2_STAT' message on beagle
U-Boot SPL 2012.04-00020-gb8310b9-dirty (Apr 25 2012 - 18:49:57)
Texas Instruments Revision detection unimplemented
OMAP SD/MMC: 0
timed out in wait_for_bb: I2C_STAT=1000
reading u-boot.img
the reason
Hi,
On Stefano´s tree I see this sata patch for mx5/mx6:
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commit;h=6931bd30d03de827c52bf2c8ddc6ed0c8f21dc9d
Has anyone tried sata support on mx6qsabrelite yet?
Any patches missing that were not applied?
I don't have a way to test it at the moment, bu
On 04/25/2012 05:57 AM, Joakim Tjernlund wrote:
>>
>> Debugging of e500 and e500v1 processer requires MSR[DE] bit to be set always.
>> Where MSR = Machine State register
>>
>> Make sure of MSR[DE] bit is set uniformaly across the different execution
>> address space i.e. AS0 and AS1.
>
> Hi
>
> W
Scott Wood wrote on 2012/04/25 20:43:22:
>
> On 04/25/2012 05:57 AM, Joakim Tjernlund wrote:
> >>
> >> Debugging of e500 and e500v1 processer requires MSR[DE] bit to be set
> >> always.
> >> Where MSR = Machine State register
> >>
> >> Make sure of MSR[DE] bit is set uniformaly across the differ
On 04/25/2012 01:55 PM, Joakim Tjernlund wrote:
>
> Scott Wood wrote on 2012/04/25 20:43:22:
>>
>> On 04/25/2012 05:57 AM, Joakim Tjernlund wrote:
Debugging of e500 and e500v1 processer requires MSR[DE] bit to be set
always.
Where MSR = Machine State register
Make s
On 04/18/2012 05:07 AM, Joakim Tjernlund wrote:
> Your linker file is buggy I think. I found u-boot-nand_spl.lds, is that the
> one?
That's the one for the SPL part.
> Check out that files reloc part:
> .reloc : {
> _GOT2_TABLE_ = .;
> KEEP(*(.got2))
> _
On 04/25/2012 11:40 AM, Fabio Estevam wrote:
Hi,
On Stefano´s tree I see this sata patch for mx5/mx6:
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commit;h=6931bd30d03de827c52bf2c8ddc6ed0c8f21dc9d
Has anyone tried sata support on mx6qsabrelite yet?
Any patches missing that were not applied?
pdnb3 and scpu are explicitly on LIST_ixp, even though they are
also specified in boards.cfg as having cpu ixp. This means that
they will be built twice when doing ./MAKEALL ixp, or ./MAKEALL arm.
This was pointless before, but actually breaks things if you launch
both builds at the same time, as
On Tuesday 24 April 2012 03:33:35 Stefano Babic wrote:
> On 22/04/2012 22:23, Charles Manning wrote:
> > On Friday 20 April 2012 09:40:50 Tom Rini wrote:
> >> On Mon, Apr 16, 2012 at 04:32:07PM +1200, Charles Manning wrote:
> >>> Hello ubooters and yaffsers
>
> Hi Charles,
>
> >>> I was commissione
On Tuesday 24 April 2012 08:58:09 you wrote:
> Dear Charles Manning,
>
> In message <201204231346.32195.mannin...@actrix.gen.nz> you wrote:
> > I recently sent a message to the list announcing a method for patching in
> > the latest yaffs2.
> >
> > u-boot updated with the latest yaffs2 can be pulle
If uart2 is enabled during boot, spurious wifi chip transmission will
hang the module and it is impossible to recover from this situation
without hard reset. This will prevent any l4_per domain idle
transitions.
Signed-off-by: Tero Kristo
---
board/ti/panda/panda_mux_data.h |8
1 fi
If this is done in the bootloader, the FS-USB will later be stuck into
intransition state, which will prevent the device from entering idle.
Signed-off-by: Tero Kristo
---
arch/arm/cpu/armv7/omap4/clocks.c |2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/arm
[sorry, failed with the header sending, trying it again]
Hi,
The following patches are needed before kernel can enter core retention.
Namely, u-boot is enabling some functionality too early in the init
phase which seems not to be needed, and it is causing trouble later on.
I haven't found any oth
Booting up these cores (dsp / ivahd / cortex-m3) is bad without
firmware running on them, and they will hang preventing any kind
of sleep transitions later on with the kernel.
Signed-off-by: Tero Kristo
---
arch/arm/cpu/armv7/omap4/clocks.c |4
1 files changed, 0 insertions(+), 4 deleti
List,
"make menuconfig" does not work for u-boot under panadaboard.
Old mailing list said because of no Kconfig in u-boot tree.
Any plan to add Kconfig or any other way to configure u-boot?
Thanks for any help!
---henry
___
U-Boot mailing list
U-Boot@l
Dear all:
I had a ARM platform which call DVTEST.
While booting, the platform (ROM code) will copy image from SD card to SDRAM
base address (0x0).
So my TEXT_BASE address should be start from 0x.
But I found all the ARM platforms in U-boot didn’t start from their SDRAM
base address.
On 04/19/2012 08:53 AM, Ilya Averyanov wrote:
> arch/arm/include/asm/arch-s3c24x0/s3c2410.h |4 +-
> arch/arm/include/asm/arch-s3c24x0/s3c2440.h |4 +-
> arch/arm/include/asm/arch-s3c24x0/s3c24x0.h | 13 +-
> drivers/mtd/nand/Makefile |3 +-
> drivers/mtd/nand/s3c24
On Wed, Apr 25, 2012 at 3:22 AM, Albert ARIBAUD
wrote:
> Hi Andy,
>
> Le 25/04/2012 07:33, Andy Fleming a écrit :
> *However*, two boards build without and do not build clean with: scpu and
> pndb3.
Ok, I figured that one out, and sent out a patch.
>
> Also, the final report is not displayed a
Dear =?big5?B?p2Sn065w?=,
In message <001e01cd2301$609c2e00$21d48a00$@x...@msa.hinet.net> you wrote:
...
Urgent~
...
> Please help me because this problem had confused me a lot of days.
Please see the README (section "U-Boot Porting Guide", but also
section "System Initialization"), and read doc/
On 04/17/2012 01:50 PM, Simon Glass wrote:
> +#define DEBUG
Did you mean to leave this in?
> +/**
> + * [DEFAULT] Read one byte from the chip
> + *
> + * @param mtdMTD device structure
> + * @return data byte
> + *
> + * Default read function for 8bit bus-width
> + */
This isn't the de
On 04/25/2012 12:10 PM, Eric Nelson wrote:
On 04/25/2012 11:40 AM, Fabio Estevam wrote:
Hi,
On Stefano´s tree I see this sata patch for mx5/mx6:
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commit;h=6931bd30d03de827c52bf2c8ddc6ed0c8f21dc9d
Has anyone tried sata support on mx6qsabrelite yet?
On Thu, Apr 26, 2012 at 09:08:42AM +1200, Charles Manning wrote:
> On Tuesday 24 April 2012 08:58:09 you wrote:
> > Dear Charles Manning,
> >
> > In message <201204231346.32195.mannin...@actrix.gen.nz> you wrote:
> > > I recently sent a message to the list announcing a method for patching in
> > >
Hi Henry,
On Thu, Apr 26, 2012 at 4:21 AM, hong zhang wrote:
> List,
>
> "make menuconfig" does not work for u-boot under panadaboard.
> Old mailing list said because of no Kconfig in u-boot tree.
Correct - new mailing list says the same thing ;)
> Any plan to add Kconfig or any other way to co
On Thursday 26 April 2012 10:21:37 Tom Rini wrote:
> On Thu, Apr 26, 2012 at 09:08:42AM +1200, Charles Manning wrote:
> > On Tuesday 24 April 2012 08:58:09 you wrote:
> > > Dear Charles Manning,
> > >
> > > In message <201204231346.32195.mannin...@actrix.gen.nz> you wrote:
> > > > I recently sent a
On 04/25/2012 03:28 PM, Charles Manning wrote:
On Thursday 26 April 2012 10:21:37 Tom Rini wrote:
On Thu, Apr 26, 2012 at 09:08:42AM +1200, Charles Manning wrote:
On Tuesday 24 April 2012 08:58:09 you wrote:
Dear Charles Manning,
In message<201204231346.32195.mannin...@actrix.gen.nz> you wro
On Thursday 26 April 2012 10:40:51 Tom Rini wrote:
> On 04/25/2012 03:28 PM, Charles Manning wrote:
> > On Thursday 26 April 2012 10:21:37 Tom Rini wrote:
> >> On Thu, Apr 26, 2012 at 09:08:42AM +1200, Charles Manning wrote:
> >>> On Tuesday 24 April 2012 08:58:09 you wrote:
> Dear Charles Man
Acked-by: Mike Frysinger
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Wednesday 25 April 2012 14:46:27 Tom Rini wrote:
> --- a/mkconfig
> +++ b/mkconfig
> @@ -167,6 +167,11 @@ cat << EOF >> config.h
> #include
> #include
> #include
> +
> +/* Default baud rate table */
> +#ifndef CONFIG_SYS_BAUDRATE_TABLE
> +#define CONFIG_SYS_BAUDRATE_TABLE{ 9600, 19200,
On Tuesday 24 April 2012 03:53:44 Thierry Reding wrote:
> The MMC core sometimes reads buffers that are smaller than a complete
> cacheline, for example when reading the SCR. In order to avoid a warning
> from the ARM v7 cache handling code, this patch makes sure that complete
> cachelines are flus
Dear Lukasz Majewski,
> USB Composite gadget implementation for u-boot. It builds on top
> of USB UDC drivers.
>
> This commit is based on following files from Linux Kernel v2.6.36:
>
> ./include/linux/usb/composite.h
> ./drivers/usb/gadget/composite.c
>
> SHA1: d187abb9a83e6c6b6e9f2ca17962bdea
On 03/26/2012 09:59 AM, Eric Nelson wrote:
On 03/26/2012 06:42 AM, Stefano Babic wrote:
On 26/03/2012 15:35, Eric Nelson wrote:
On 03/26/2012 01:35 AM, Stefano Babic wrote:
On 26/03/2012 01:00, Eric Nelson wrote:
V2 has been stripped of the board-independent changes and
+#ifde
panel_info data structure is gloable variable, so, I have initialized it
in board file. If it is initialized in init_panel_info() like existing,
it can't be used in drv_lcd_init() in common/lcd.c because
init_panel_info() is called after drv_lcd_init().
change of v1:
- I had made a mistake that m
Dear Scott Wood,
> On 04/19/2012 08:53 AM, Ilya Averyanov wrote:
> > arch/arm/include/asm/arch-s3c24x0/s3c2410.h |4 +-
> > arch/arm/include/asm/arch-s3c24x0/s3c2440.h |4 +-
> > arch/arm/include/asm/arch-s3c24x0/s3c24x0.h | 13 +-
> > drivers/mtd/nand/Makefile |3
This patch requires Stefano's driver for MX5/MX6 to be useful.
http://lists.denx.de/pipermail/u-boot/2012-February/118530.html
This is the first and board-independent part of what's needed to enable
SATA on an i.MX6 board as discussed in this thread:
http://lists.denx.de/pipermail
Signed-off-by: Eric Nelson
---
V2 has been stripped of the board-independent changes and
uses clrsetbits_le32() instead of twiddling bits by hand.
V3 returns immediately from setup_sata() if enable_sata_clock()
returns an error.
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 32
On 04/25/2012 03:11 PM, Eric Nelson wrote:
On 04/25/2012 12:10 PM, Eric Nelson wrote:
On 04/25/2012 11:40 AM, Fabio Estevam wrote:
Hi,
On Stefano´s tree I see this sata patch for mx5/mx6:
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commit;h=6931bd30d03de827c52bf2c8ddc6ed0c8f21dc9d
Has any
Uses the 'magic_keys' idiom as described in doc/README.kbd:
http://lists.denx.de/pipermail/u-boot/2012-April/122502.html
Signed-off-by: Eric Nelson
Acked-by: Marek Vasut
---
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 122 -
include/configs/mx6qsabrelite.h
Hi Eric,
On Wed, Apr 25, 2012 at 8:55 PM, Eric Nelson
wrote:
> I just re-based and re-sent two of the three patches needed to get
> SATA up and running against mainline/master.
That's good news! Thanks a lot!
I think Pete can give a try on SATA with mainline U-boot now.
Thanks,
Fabio Estevam
Dear Eric Nelson,
> Uses the 'magic_keys' idiom as described in doc/README.kbd:
> http://lists.denx.de/pipermail/u-boot/2012-April/122502.html
If this is a V2 of a patch, please send is as "in-reply-to" and descibe the
changes below (at spot marked V2 (and V3 etc))... Also, change the key
Signed-off-by: Eric Nelson
---
V2 fixes checkpatch errors and typecasts as pointed out on the ML.
drivers/mmc/fsl_esdhc.c | 17 -
1 files changed, 16 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index a2f35e3..539d848 100644
---
On 04/25/2012 05:17 PM, Marek Vasut wrote:
Dear Eric Nelson,
Uses the 'magic_keys' idiom as described in doc/README.kbd:
http://lists.denx.de/pipermail/u-boot/2012-April/122502.html
If this is a V2 of a patch, please send is as "in-reply-to" and descibe the
changes below (at spot mar
On 03/28/2012 07:37 AM, Jason Cooper wrote:
This patch dramatically drops the amount of time u-boot needs to read a
file from an ext2 partition. On a typical 2 to 5 MB file (kernels and
initrds) it goes from tens of seconds to a couple seconds.
All we are doing here is grouping contiguous block
Hello, everyone!
I find a strange problem when I use the u-boot command. I list the command I
used in the u-boot command line as follows.
nand erase
nand read 0x200 0x0 0x800
md 0x200
I should see 2K bytes of "0xFF" because I have erase the whole nand flash
device. Actually, I find a
Hi Scott,
On Wednesday 25 April 2012 08:20 PM, Scott Wood wrote:
On 04/24/2012 11:05 PM, Andy Fleming wrote:
On Tue, Apr 24, 2012 at 10:48 PM, Prabhakar Kushwaha
wrote:
Hi,
On Wednesday 25 April 2012 02:50 AM, Andy Fleming wrote:
On Tue, Apr 24, 2012 at 4:10 PM, Scott Wood
wrote:
On
All,
I know this is a little off topic, but u-boot is the only project I've
found implementing a feature I'd like to add to a project.
Specifically, the macro U_BOOT_CMD() and it's use of
section(".u_boot_cmd").
I'd like to implement something similar in a userspace C program, but I
can't get it
Hi Civic Wu,
> Please see the README (section "U-Boot Porting Guide", but also
> section "System Initialization"), and read doc/README.SPL and
> http://catb.org/esr/faqs/smart-questions.html
>
> If this is urgent, and you spent many days on this, then the best
> advice for you is to hire an expert
Hi Fabio,
On 20.03.2012 22:40, Fabio Estevam wrote:
get_ahb_clk() is a common function between mx5 and mx6.
Place it into imx-common directory.
Signed-off-by: Fabio Estevam
---
arch/arm/cpu/armv7/imx-common/cpu.c| 23
arch/arm/cpu/armv7/mx5/clock.c
* Mike Frysinger wrote:
> On Tuesday 24 April 2012 03:53:44 Thierry Reding wrote:
> > The MMC core sometimes reads buffers that are smaller than a complete
> > cacheline, for example when reading the SCR. In order to avoid a warning
> > from the ARM v7 cache handling code, this patch makes sure tha
Scott Wood wrote on 2012/04/25 21:01:00:
>
> On 04/18/2012 05:07 AM, Joakim Tjernlund wrote:
> > Your linker file is buggy I think. I found u-boot-nand_spl.lds, is that the
> > one?
>
> That's the one for the SPL part.
OK, good.
>
> > Check out that files reloc part:
> > .reloc : {
> > _G
84 matches
Mail list logo
