On 04/25/2012 05:57 AM, Joakim Tjernlund wrote: >> >> Debugging of e500 and e500v1 processer requires MSR[DE] bit to be set always. >> Where MSR = Machine State register >> >> Make sure of MSR[DE] bit is set uniformaly across the different execution >> address space i.e. AS0 and AS1. > > Hi > > We are trying to bring up our custom P2010 RDB based board. boot is NOR > based and we cannot get past the rfi below. > lis r6,MSR_IS|MSR_DS@h > ori r6,r6,MSR_IS|MSR_DS@l > lis r7,switch_as@h > ori r7,r7,switch_as@l > > mtspr SPRN_SRR0,r7 > mtspr SPRN_SRR1,r6 > rfi > > switch_as: > > We end up with a TLB exception no matter what we do, even after applying this > patch.
Did you apply the entire patchset, and define CONFIG_SYS_PPC_E500_DEBUG_TLB? -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
