If uart2 is enabled during boot, spurious wifi chip transmission will
hang the module and it is impossible to recover from this situation
without hard reset. This will prevent any l4_per domain idle
transitions.
Signed-off-by: Tero Kristo <t-kri...@ti.com>
---
board/ti/panda/panda_mux_data.h | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
index 3efc22a..dc8b388 100644
--- a/board/ti/panda/panda_mux_data.h
+++ b/board/ti/panda/panda_mux_data.h
@@ -168,10 +168,10 @@ const struct pad_conf_entry
core_padconf_array_non_essential[] = {
{ABE_DMIC_DIN1, (IEN | M0)}, /*
abe_dmic_din1 */
{ABE_DMIC_DIN2, (PTU | IEN | M3)}, /*
gpio_121 */
{ABE_DMIC_DIN3, (IEN | M0)}, /*
abe_dmic_din3 */
- {UART2_CTS, (PTU | IEN | M0)}, /*
uart2_cts */
- {UART2_RTS, (M0)}, /*
uart2_rts */
- {UART2_RX, (PTU | IEN | M0)}, /*
uart2_rx */
- {UART2_TX, (M0)}, /*
uart2_tx */
+ {UART2_CTS, (PTU | IEN | M7)}, /*
uart2_cts */
+ {UART2_RTS, (M7)}, /*
uart2_rts */
+ {UART2_RX, (PTU | IEN | M7)}, /*
uart2_rx */
+ {UART2_TX, (M7)}, /*
uart2_tx */
{HDQ_SIO, (M3)}, /*
gpio_127 */
{MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /*
mcspi1_clk */
{MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /*
mcspi1_somi */
--
1.7.4.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
