panel_info data structure is global variable, so, I have initialized it
in board file. If it is initialized in init_panel_info() like existing,
it can't be used in drv_lcd_init() in common/lcd.c because
init_panel_info() is called after drv_lcd_init().
Signed-off-by: Donghwa Lee <dh09....@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
---
board/samsung/trats/trats.c | 72 ++++++++++++++++++++++--------------------
drivers/video/exynos_fb.c | 3 --
2 files changed, 38 insertions(+), 37 deletions(-)
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 3085de1..a569c83 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -455,43 +455,47 @@ static int mipi_power(void)
return 0;
}
-void init_panel_info(vidinfo_t *vid)
-{
- vid->vl_freq = 60;
- vid->vl_col = 720;
- vid->vl_row = 1280;
- vid->vl_width = 720;
- vid->vl_height = 1280;
- vid->vl_clkp = CONFIG_SYS_HIGH;
- vid->vl_hsp = CONFIG_SYS_LOW;
- vid->vl_vsp = CONFIG_SYS_LOW;
- vid->vl_dp = CONFIG_SYS_LOW;
-
- vid->vl_bpix = 5;
- vid->dual_lcd_enabled = 0;
+vidinfo_t panel_info = {
+ .vl_freq = 60,
+ .vl_col = 720,
+ .vl_row = 1280,
+ .vl_width = 720,
+ .vl_height = 1280,
+ .vl_clkp = CONFIG_SYS_HIGH,
+ .vl_hsp = CONFIG_SYS_LOW,
+ .vl_vsp = CONFIG_SYS_LOW,
+ .vl_dp = CONFIG_SYS_LOW,
+
+ .vl_bpix = 5, /* Bits per pixel, 2^5 = 32 */
/* s6e8ax0 Panel */
- vid->vl_hspw = 5;
- vid->vl_hbpd = 10;
- vid->vl_hfpd = 10;
-
- vid->vl_vspw = 2;
- vid->vl_vbpd = 1;
- vid->vl_vfpd = 13;
- vid->vl_cmd_allow_len = 0xf;
-
- vid->win_id = 3;
- vid->cfg_gpio = NULL;
- vid->backlight_on = NULL;
- vid->lcd_power_on = NULL; /* lcd_power_on in mipi dsi driver */
- vid->reset_lcd = lcd_reset;
-
- vid->init_delay = 0;
- vid->power_on_delay = 0;
- vid->reset_delay = 0;
- vid->interface_mode = FIMD_RGB_INTERFACE;
- vid->mipi_enabled = 1;
+ .vl_hspw = 5,
+ .vl_hbpd = 10,
+ .vl_hfpd = 10,
+
+ .vl_vspw = 2,
+ .vl_vbpd = 1,
+ .vl_vfpd = 13,
+ .vl_cmd_allow_len = 0xf,
+
+ .win_id = 3,
+ .cfg_gpio = NULL,
+ .backlight_on = NULL,
+ .lcd_power_on = NULL, /* lcd_power_on in mipi dsi driver */
+ .reset_lcd = lcd_reset,
+
+ .init_delay = 0,
+ .power_on_delay = 0,
+ .reset_delay = 0,
+ .interface_mode = FIMD_RGB_INTERFACE,
+ .mipi_enabled = 1,
+ .boot_logo_on = 1,
+ .logo_height = TIZEN_LOGO_HEIGHT,
+ .logo_width = TIZEN_LOGO_WIDTH,
+};
+void init_panel_info(vidinfo_t *vid)
+{
strcpy(s6e8ax0_platform_data.lcd_panel_name, mipi_lcd_device.name);
s6e8ax0_platform_data.lcd_power = lcd_power;
s6e8ax0_platform_data.mipi_power = mipi_power;
diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c
index a1cf449..96a8ec1 100644
--- a/drivers/video/exynos_fb.c
+++ b/drivers/video/exynos_fb.c
@@ -44,9 +44,6 @@ short console_row;
static unsigned int panel_width, panel_height;
-/* LCD Panel data */
-vidinfo_t panel_info;
-
static void exynos_lcd_init_mem(void *lcdbase, vidinfo_t *vid)
{
unsigned long palette_size;
--
1.7.4.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
