On Wed, Oct 10, 2012 at 7:43 PM, Benoît Thébaudeau
wrote:
> Or for the Eth PHY connected to the FEC?
Yes, for the DP83640 PHY connected to the FEC. The Ethernet PHY is powered now.
>
>> Still not able to get FEC to work on mx25pdk, but it seems to be
>> another problem now.
>
> FYI, the FEC wor
On Wed, Oct 10, 2012 at 6:50 PM, Fabio Estevam wrote:
> Hi,
>
> Has anyone managed to get i2c to work on mx25?
>
> I am using the latest u-boot.imx tree and I noticed that "i2c_write"
> always returns error.
Ok, i2c_write does work now. This recent commit fixed it:
commit b1e9e9ef71e6a33c3cc675a
Hi, Protr.
2012/9/24 Piotr Wilczek :
> This patch add the spacing for i2c for Exynos4
>
> Signed-off-by: Piotr Wilczek
> Signed-off-by: Kyungmin Park
> CC: Minkyu Kang
> ---
> arch/arm/include/asm/arch-exynos/cpu.h |2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/
From: Gabe Black
I suspect these includes were usually available because something else
included them earlier or because they were brought in transitively.
Signed-off-by: Gabe Black
Signed-off-by: Simon Glass
---
arch/x86/include/asm/global_data.h |2 ++
arch/x86/include/asm/u-boot.h
On 10/09/2012 06:20 PM, Scott Wood wrote:
> On 10/09/2012 06:25:47 PM, Stephen Warren wrote:
>> On 10/09/2012 05:00 PM, Scott Wood wrote:
>> > On 10/09/2012 05:14:23 PM, Stephen Warren wrote:
>> >> I don't quite follow that; linux-next is also purely merge-based. Are
>> >> you referring to the fact
Dear Graeme Russ,
> Hi Simon,
>
> On Thu, Oct 11, 2012 at 10:13 AM, Simon Glass wrote:
> > Coreboot boards have an LPC TPM connected, so enable this. We also need
> > to skip the reset code.
> >
> > Signed-off-by: Simon Glass
> > ---
> >
> > include/configs/coreboot.h |6 +-
> > 1 fi
From: Gabe Black
When running from coreboot we don't want this code.
This version works by ifdef-ing out all of the code that would go
into those sections and all the code that refers to it. The sections are
then empty, and the linker will either leave them empty for the loader
to ignore or remo
Now that coreboot doesn't need the start16 code, remove it.
Signed-off-by: Simon Glass
---
Changes in v2:
- Add new patch to remove coreboot start16 code.
board/chromebook-x86/coreboot/coreboot_start16.S | 13 -
1 files changed, 0 insertions(+), 13 deletions(-)
diff --git a/board
On 10/10/2012 04:02 PM, Scott Wood wrote:
...
> Ideally once a pull request happens the pull happens quickly. If that
> doesn't happen, you could reply to the pull request asking that it be
> ignored in favor of a new pull request, or create a new temporary
> branch. IMHO pull requests ought to r
This is a ulong for some architectures and just unsigned for others.
Change x86 to be consistent.
Signed-off-by: Simon Glass
---
arch/x86/include/asm/u-boot.h |2 +-
common/cmd_bdinfo.c |2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/
Coreboot boards have an LPC TPM connected, so enable this. We also need
to skip the reset code.
Signed-off-by: Simon Glass
---
include/configs/coreboot.h |6 +-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index 2
On Wednesday, October 10, 2012 8:14:02 PM, Stephen Warren wrote:
> This makes the FAT filesystem API more consistent with other
> block-based
> filesystems. If in the future standard multi-filesystem commands such
> as
> "ls" or "load" are implemented, having FAT work the same way as other
> filesy
On Wednesday, October 10, 2012 7:57:51 PM, Stephen Warren wrote:
> When get_device_and_partition() finds a disk without a partition
> table,
> under some conditions, it "returns" a disk_partition_t that describes
> the entire raw disk. Make sure to initialize all fields in the
> partition
> descrip
From: Gabe Black
A hook is installed to configure PCI bus bridges as they encountered by u-boot.
The hook extracts the secondary bus number from the bridge's config space and
then recursively scans that bus.
On Coreboot, the PCI bus address space has identity mapping with the
physical address sp
Dear Minkyu Kang,
The reason I didn't provide the last patch to use the hardware I2C is that
on Trats board a software I2C is used to communicate with Fuel Gage.
Unfortunately in u-boot soft_i2c and hardware I2C cannot be used at the same
time. The patchset was tested on Trats board and it worked
This series carries on from Gabe Black's work to upstream support for
running U-Boot from coreboot.
Aditional follow-on patches are also required, depending on feedback
here.
Changes in v2:
- Put CONFIG_NO_RESET_CODE into Makefile instead of source files
- Add new patch to remove coreboot start16
From: Stefan Reinauer
coreboot.c and coreboot_pci.c don't contain board specific but only
coreboot specific code. Hence move it to the coreboot directory in
arch/x86/cpu (which should probably be moved out of cpu/ in another
commit)
Signed-off-by: Stefan Reinauer
Signed-off-by: Simon Glass
---
Hi Tom Rini
I cannot easy find a way to use 'puts' instead 'serial_puts' in my code.
any advise will be great.
Thanks
Xiangfu
On 10/10/2012 05:27 AM, Daniel Schwierzeck wrote:
>> I'm happy you've moved to the new SPL infrastructure. A few comments:
>>
>> In general, please check for checkpatch
From: Vadim Bendebury
This prevents the preprocessor from complaining when processing
variadic macros
Signed-off-by: Vadim Bendebury
Signed-off-by: Simon Glass
---
board/chromebook-x86/coreboot/config.mk | 37 +++
1 files changed, 37 insertions(+), 0 deletions(-
On 10/10/2012 12:15 AM, Albert ARIBAUD wrote:
> Hi Stephen,
>
> On Tue, 09 Oct 2012 17:04:06 -0600, Stephen Warren
> wrote:
>
>> On 10/09/2012 04:19 PM, Albert ARIBAUD wrote:
>
>>> Apart from this, I'm not sure why forbidding fast-forward is a good
>>> thing, but if there are benefits, why not.
On Wed, Oct 10, 2012 at 8:28 PM, Fabio Estevam wrote:
> Ok, thanks. I will debug more. If you have a chance to test mx25 FEC
> with 2012.10-rc3, just let me know.
Nevermind. Problem solved. It was a config file issue I had.
Will submit the patches soon.
Thanks for your help,
Fabio Estevam
___
I'm debugging some SPL changes and am still having a hard time
following the initial TLB flow. We seem to be creating an entry in AS0
-- how is that not conflicting with the TLB entry we're running from?
Why is the debug TLB 256K? Why is it not aligned to 256K? How do you
know that MAS2
Hi,
The u-boot on my board freescale P1010RDB is erased.There was a problem when i
want to reflash it.
Is there a tool from freescale to put the first u-boot from nand on my board
freescale P1010RDB ?
Thanks.
Best regards.
RANDRIAMANJAKA FRANKY
Tél. 0033634259173
Hi Simon,
On Thu, Oct 11, 2012 at 10:12 AM, Simon Glass wrote:
> From: Gabe Black
>
> I suspect these includes were usually available because something else
> included them earlier or because they were brought in transitively.
>
> Signed-off-by: Gabe Black
> Signed-off-by: Simon Glass
> ---
>
Hi
Thanks for feedback. PATVH v4 will coming soon. about 'CONFIG_SPL_FRAMEWORK'
I don't know this when I working on ben nanonote spl. I think I will stick
with this spl for awhile.
is there a plan remove drivers/mtd/nand/nand_spl_*.c?
Xiangfu
On 10/10/2012 05:27 AM, Daniel Schwierzeck wrote:
These are available on other architectures, so add them on x86.
Signed-off-by: Simon Glass
---
arch/x86/include/asm/io.h |8
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 9b757d4..b12bdd8 100644
--- a/arch
Hi Simon,
On Thu, Oct 11, 2012 at 10:12 AM, Simon Glass wrote:
> From: Stefan Reinauer
>
> coreboot.c and coreboot_pci.c don't contain board specific but only
> coreboot specific code. Hence move it to the coreboot directory in
> arch/x86/cpu (which should probably be moved out of cpu/ in anothe
From: Gabe Black
U-boot needs a host controller or "hose" to interact with the PCI busses
behind them. This change installs a host controller during initialization of
the coreboot "board" which implements some of X86's basic PCI semantics. This
relies on some existing generic code, but also dupli
From: Stephen Warren
Implement "ls" and "fsload" commands that act like {fat,ext2}{ls,load},
and transparently handle either file-system. This scheme could easily be
extended to other filesystem types; I only didn't do it for zfs because
I don't have any filesystems of that type.
Signed-off-by:
From: Stephen Warren
The FAT filesystem code knows which partition ID it is operating on.
Currently, this is passed to fat_register_device() as a parameter.
In order to convert FAT to the more standardized fat_set_blk_dev(), the
information needs to come from somewhere else, and the partition
def
From: Stephen Warren
fs/Makefile is unused. The top-level Makefile sets LIBS-y += fs/xxx and
hence causes make to directly descend two directory levels into each
individual filesystem, and it never descends into fs/ itself.
So, delete this useless file.
Signed-off-by: Stephen Warren
---
fs/Ma
From: Stephen Warren
cur_part_info.{name,type} are strings. So, we don't need to memset()
the entire thing, just put the NULL-termination in the first byte.
Add missing initialization of the bootable and uuid fields.
None of these fields are actually used by fat.c. However, since it
stores the
From: Stephen Warren
This makes the FAT filesystem API more consistent with other block-based
filesystems. If in the future standard multi-filesystem commands such as
"ls" or "load" are implemented, having FAT work the same way as other
filesystems will be necessary.
Convert cmd_fat.c to the new
From: Stephen Warren
This removes the standalone cur_part_nr variable, opening the way to
replacing fat_register_device() with fat_set_blk_dev().
Note that when get_partition_info() fails and we use the entire disk,
the correct partition number is 0 (whole disk) not 1 (first partition),
so that
Dear Andrew Bradford,
> Dear Marek Vasut,
>
> On Thu, 27 Sep 2012 18:34:18 +0200
>
> Marek Vasut wrote:
> > Dear Andrew Bradford,
> >
> > > Enable use of eserial devices for common and omap-common/spl.
> > >
> > > This probably isn't the right way to do this as the changes aren't
> > > needed
Hi Simon,
On Thu, Oct 11, 2012 at 10:12 AM, Simon Glass wrote:
> From: Gabe Black
>
> A hook is installed to configure PCI bus bridges as they encountered by
> u-boot.
> The hook extracts the secondary bus number from the bridge's config space and
> then recursively scans that bus.
>
> On Coreb
From: Xiangfu
The JZ4740 CPU can load 8KB from two different addresses:
1. the normal area up to 8KB starting from NAND flash address 0x
2. the backup area up to 8KB starting from NAND flash address 0x2000
After create u-boot-spl.bin. it needs those 4 commands create final
Hello all,
In message <20121010122316.4088a200...@gemini.denx.de> I wrote:
>
> we have a dying disk drive on our main web server, and our hoster
> (Strato) claims they have to take down the machine and replace _all_
> disks in the RAID array, so we have to reinstall from scratch [*].
It was even
Hi Simon,
On Thu, Oct 11, 2012 at 10:12 AM, Simon Glass wrote:
> From: Gabe Black
>
> When running from coreboot we don't want this code.
>
> This version works by ifdef-ing out all of the code that would go
> into those sections and all the code that refers to it. The sections are
> then empty,
From: Xiangfu
JZ4740 CPU have a internal ROM have such kind of code, that make
JZ4740 can boot from USB
usbboot.S can downloads user program from the USB port to internal
SRAM and branches to the internal SRAM to execute the program
Signed-off-by: Xiangfu
---
board/qi/qi_lb60/Makefile
Hi Simon,
On Thu, Oct 11, 2012 at 10:13 AM, Simon Glass wrote:
> Now that coreboot doesn't need the start16 code, remove it.
>
> Signed-off-by: Simon Glass
> ---
> Changes in v2:
> - Add new patch to remove coreboot start16 code.
>
> board/chromebook-x86/coreboot/coreboot_start16.S | 13 -
Hi Simon,
On Thu, Oct 11, 2012 at 10:12 AM, Simon Glass wrote:
> This is a ulong for some architectures and just unsigned for others.
> Change x86 to be consistent.
>
> Signed-off-by: Simon Glass
> ---
>
> arch/x86/include/asm/u-boot.h |2 +-
> common/cmd_bdinfo.c |2 +-
> 2 f
From: Xiangfu
V4:
* split to 2 patches (nand spl/usbbot)
* remove use define string.c using CONFIG_SPL_LIBGENERIC_SUPPORT
* fix checkputch.pl warnings
V3:
* add simpile string.c to mips/lib
* some cleanup on jz4740.c
* move to new spl/ structure
* support software usbboot mode
Xi
On Wed, Oct 10, 2012 at 09:10:28AM -0400, Andrew Bradford wrote:
> Dear Marek Vasut,
>
> On Thu, 27 Sep 2012 18:34:18 +0200
> Marek Vasut wrote:
>
> > Dear Andrew Bradford,
> >
> > > Enable use of eserial devices for common and omap-common/spl.
> > >
> > > This probably isn't the right way to
Hi Marek,
On Wed, 10 Oct 2012 00:44:29 +0200, Marek Vasut wrote:
> Add memory barrier to cache invalidate and flush calls.
Memory barrier...
"You keep using that word. I do not think it means what you think it
means." :)
A memory barrier's effect is only that all of the volatile accesses
plac
On 10/10/2012 10:55:33 AM, Stephen Warren wrote:
On 10/09/2012 06:20 PM, Scott Wood wrote:
> I don't use gitk much, but wouldn't it just show the mergeback as
> another edge in the graph (plus the merge commit itself of
course)? It
> doesn't seem like a big deal.
One big problem is the abili
From: Fabio Estevam
mx25pdk has a SD/MMC slot connected to esdhc1.
Add support for it and allow the environment variables to be saved into SD/MMC.
Signed-off-by: Fabio Estevam
---
board/freescale/mx25pdk/mx25pdk.c | 51 +
include/configs/mx25pdk.h
Hi Simon,
On Thu, Oct 11, 2012 at 10:12 AM, Simon Glass wrote:
> These are available on other architectures, so add them on x86.
>
> Signed-off-by: Simon Glass
> ---
>
> arch/x86/include/asm/io.h |8
> 1 files changed, 8 insertions(+), 0 deletions(-)
>
> diff --git a/arch/x86/inclu
Hi Fabio,
On Thursday, October 11, 2012 12:05:29 AM, Fabio Estevam wrote:
> On Wed, Oct 10, 2012 at 6:50 PM, Fabio Estevam
> wrote:
> > Hi,
> >
> > Has anyone managed to get i2c to work on mx25?
> >
> > I am using the latest u-boot.imx tree and I noticed that
> > "i2c_write"
> > always returns er
From: Stephen Warren
When get_device_and_partition() finds a disk without a partition table,
under some conditions, it "returns" a disk_partition_t that describes
the entire raw disk. Make sure to initialize all fields in the partition
descriptor in that case.
The value chosen for name is just s
Hi Simon,
On Thu, Oct 11, 2012 at 10:13 AM, Simon Glass wrote:
> Coreboot boards have an LPC TPM connected, so enable this. We also need
> to skip the reset code.
>
> Signed-off-by: Simon Glass
> ---
>
> include/configs/coreboot.h |6 +-
> 1 files changed, 5 insertions(+), 1 deletions(-
From: Fabio Estevam
It is necessary to include CONFIG_MX25 as several i.mx drivers handle the SoC
differences based on the this config option.
Signed-off-by: Fabio Estevam
---
include/configs/mx25pdk.h |1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/mx25pdk.h b/include/c
Hi Marek,
On Thu, Oct 11, 2012 at 2:45 PM, Marek Vasut wrote:
> Dear Graeme Russ,
>
>> Hi Simon,
>>
>> On Thu, Oct 11, 2012 at 10:13 AM, Simon Glass wrote:
>> > Coreboot boards have an LPC TPM connected, so enable this. We also need
>> > to skip the reset code.
>> >
>> > Signed-off-by: Simon Gla
From: Fabio Estevam
mx25pdk has a Ethernet port that is connected to its internal FEC controller.
In order to power up the Ethernet PHY (DP83640) it is necessary to communicate
with the PMIC via I2C.
Make FEC ethernet functional.
Signed-off-by: Fabio Estevam
---
board/freescale/mx25pdk/mx25p
Dear Marek Vasut,
On Thu, 27 Sep 2012 18:34:18 +0200
Marek Vasut wrote:
> Dear Andrew Bradford,
>
> > Enable use of eserial devices for common and omap-common/spl.
> >
> > This probably isn't the right way to do this as the changes aren't
> > needed for 'common' configurations, just for one ca
Hello all,
we have a dying disk drive on our main web server, and our hoster
(Strato) claims they have to take down the machine and replace _all_
disks in the RAID array, so we have to reinstall from scratch [*].
This means the Mailing List / git / FTP / Web Server will be down for
some time, sta
Dear Albert,
The following changes since commit 28e5ac2d974547bde0c72aa0c1d66fd22c6ef3ad:
arm: armv7: temporarily set -mno-unaligned-access (2012-10-05 21:24:22 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
for you to fetch changes up to 9b5dba53747
On 03/10/2012 19:28, Eric Nelson wrote:
> Adds support for HDMI, two LVDS panels and one RGB panel to
> the SABRE-Lite board.
>
> Displays supported:
> HDMI - 1024 x 768 for maximum compatibility
> Hannstar-XGA - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1)
>
On 03/10/2012 19:28, Eric Nelson wrote:
> Original source from Pengutronix HDMI driver work:
>
>
> http://git.pengutronix.de/?p=imx/linux-2.6.git;a=commitdiff;h=72c31cd67ac880bd90785af86f8e46f8ea7b3bb0
>
> Signed-off-by: Eric Nelson
> ---
Applied to u-boot-imx, next branch, thanks.
Best
On 03/10/2012 19:28, Eric Nelson wrote:
> Default drive strength is disabled and won't function.
>
> Signed-off-by: Eric Nelson
> ---
Applied to u-boot-imx, next branch, thanks.
Best regards,
Stefano Babic
--
=
DENX Software
Dear Piotr Wilczek,
On 24 September 2012 15:49, Piotr Wilczek wrote:
> This patchset enables hardware I2C support for Exynos 4.
> The s3c24x0 I2C driver is modified to use for for both Exynos 4 and Exynos 5.
> Pinmux setting is add for Exynos 4.
> PMIC MAX8997 driver is modified to support multi
On 03/10/2012 19:27, Eric Nelson wrote:
> Signed-off-by: Eric Nelson
> ---
> board/freescale/mx51evk/mx51evk.c |2 +-
> board/freescale/mx53loco/mx53loco.c |2 +-
> board/ttcontrol/vision2/vision2.c |2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
Applied to u-boot-im
On 03/10/2012 19:27, Eric Nelson wrote:
> Signed-off-by: Eric Nelson
> ---
> drivers/video/mxc_ipuv3_fb.c |8 +---
> include/ipu_pixfmt.h |4 +++-
> 2 files changed, 8 insertions(+), 4 deletions(-)
>
Applied to u-boot-imx, next branch, thanks.
Best regards,
Stefano Babic
On 03/10/2012 19:26, Eric Nelson wrote:
> Signed-off-by: Eric Nelson
> ---
> board/freescale/mx6qarm2/mx6qarm2.c |8
> board/freescale/mx6qsabreauto/mx6qsabreauto.c |6 +++---
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 18 +-
> board/freescale/m
On 02/10/2012 23:20, Fabio Estevam wrote:
> The kernel from Freescale expects that the bootloader passes the board
> revision.
>
> Read the board revision and pass it via get_board_rev().
>
> Without passing the board revision the kernel does not operate properly as the
> initialization of perip
On 02/10/2012 21:22, Otavio Salvador wrote:
> The mmcroot setting vary between mx6qsabreauto and mx6qsabresd so we
> move this to the board configuration file.
>
> Signed-off-by: Otavio Salvador
> ---
Applied to u-boot-imx, next branch, thanks.
Best regards,
Stefano Babic
--
===
On 08/10/2012 20:34, Benoît Thébaudeau wrote:
> Clean up i.MX25 imx-regs.h:
> - Update mx31 imx-regs.h filename.
> - Test for __KERNEL_STRICT_NAMES just in case.
> - Define internal RAM size.
>
> Signed-off-by: Benoît Thébaudeau
> Cc: Stefano Babic
> ---
Applied to u-boot-imx, next branch,
On 08/10/2012 20:34, Benoît Thébaudeau wrote:
> Clean up i.MX25 imx-regs.h:
> - Update mx31 imx-regs.h filename.
> - Test for __KERNEL_STRICT_NAMES just in case.
> - Define internal RAM size.
>
> Signed-off-by: Benoît Thébaudeau
> Cc: Stefano Babic
> ---
Applied to u-boot-imx, next branch, th
Dear Piotr Wilczek,
On 24 September 2012 20:56, Piotr Wilczek wrote:
> This patchset add software SPI support on Samsung Universal C210 board.
> In SPI software driver #ifdef CONFIG_SYS_IMMR in spi_init function is added.
>
> Changes in v2:
> - removed space between # and include;
> - changed ret
From: Eric Nelson
Signed-off-by: Eric Nelson
Signed-off-by: Stefano Babic
---
Changes since V1:
- stack variable must be also declared const to avoid
gcc warnings (Stefano Babic)
arch/arm/imx-common/iomux-v3.c |5 +++--
arch/arm/include/asm/imx-common/iomux-v3.h |3 ++-
2
On 01/10/2012 20:36, Benoît Thébaudeau wrote:
> On mxc, each SDHC instance has a dedicated clock, so gd->sdhc_clk is not
> suitable for the multi-instance use case (initialization made directly with
> fsl_esdhc_initialize()).
>
> This patch fixes this issue by adding a configuration field for the
On 27/09/2012 22:26, Benoît Thébaudeau wrote:
> Each eSDHC instance has a dedicated clock.
>
> gd->sdhc_clk must also be set accordingly. This is good for the case only a
> single SDHC instance is used (initialization made with fsl_esdhc_mmc_init()).
> A
> future patch will fix the multi-instance
On 20/08/2012 21:54, Benoît Thébaudeau wrote:
> Clean up mx35 lowlevel_init:
> - Indent with tabs.
> - Fix comments.
> - Use defined values instead of literal constants.
> - Use defined macros instead of duplicating code.
> - Use macro parameters with default values instead of #define'd config
Dear Piotr Wilczek,
On 9 October 2012 15:45, Piotr Wilczek wrote:
> This patch turns power down for unused core 1
>
> Signed-off-by: Piotr Wilczek
> Signed-off-by: Kyungmin Park
> CC: Minkyu Kang
> ---
> board/samsung/trats/trats.c |4
> 1 files changed, 4 insertions(+), 0 deletions(
Hi,
I haven't been following the list closely for a while but I have run
into some issues when writing some drivers for some non-standard PHY
devices.
One PHY I am supporting is the Cortina CS4321 device. This PHY can be
configured in various modes such as XAUI, RXAUI, SGMII, and several FC
>> As an aside, I noticed omap3_beagle in board.cfg, so I tried 'make
>> omap3_beagle_config && make' but the resultant MLO and u-boot.img did
>> not work at all. am335x_evm_config works fine, but I'm curious what
>> omap3_beagle_config is for if anyone knows.
>
> omap3_beagle is for the beagleboa
76 matches
Mail list logo
