On Wed, Oct 10, 2012 at 7:43 PM, Benoît Thébaudeau <benoit.thebaud...@advansee.com> wrote:
> Or for the Eth PHY connected to the FEC? Yes, for the DP83640 PHY connected to the FEC. The Ethernet PHY is powered now. > >> Still not able to get FEC to work on mx25pdk, but it seems to be >> another problem now. > > FYI, the FEC works fine for me in U-Boot for another i.MX25 board using a > Micrel > PHY. That required some patches for 2012.07, but they are now in > u-boot/master. > There are also some i.MX25 patches in u-boot-imx/next that might help, but I > don't think that they were needed to make FEC work. However, I haven't updated > yet to 2012.10-rc3, so there might be a regression somewhere, or an issue with > the PHY. Ok, thanks. I will debug more. If you have a chance to test mx25 FEC with 2012.10-rc3, just let me know. Thanks, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
