On 03/10/2012 19:28, Eric Nelson wrote: > Adds support for HDMI, two LVDS panels and one RGB panel to > the SABRE-Lite board. > > Displays supported: > HDMI - 1024 x 768 for maximum compatibility > Hannstar-XGA - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1) > wsvga-lvds - 1024 x 600 LVDS (Boundary p/n Nit6X_1024x600) > wvga-rgb - 800 x 480 RGB (Boundary p/n Nit6X_800x480) > > Since the ipuv3_fb display driver currently supports only a single display, > this code auto-detects panel by probing the HDMI Phy for Hot Plug Detect > or the I2C touch controller of the LVDS and RGB displays in the priority > listed above. > > Setting 'panel' environment variable to one of the names above will > override auto-detection. > > Signed-off-by: Eric Nelson <eric.nel...@boundarydevices.com> > ---
Applied to u-boot-imx, next branch, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
