message to say "please hold for assistance or whatever" and the VM will ring
all extensions in that group. Brad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, September 08, 2008 12:22 PM
To: kxt@kxthelp.com
Sub
I forgot, you do need to put the Station Hunt value to UCD or Ring Group.
You can then add login and logout features per station.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, September 08, 2008 12:22 PM
To: kxt@kxthelp.co
afternoon as it is set to do. The break and lunch modes are for
the later releases of the KXTD. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Ross L.
Sent: Wednesday, February 25, 2009 13:16
To: Benjamin Hirsch; kxt@kxthelp.com
Subject: Re
the analog extension. Don't forget to do both day and night programming. You
should also place that line in a different trunk group from the other lines
say group 8 and then isolate that trunk group in automatic lines in
programming so when people dial "9", it won't c
, just
put the dial tone on the first pair going to the phone and that will
activate the XDP Jack with just dial tone. No real need to put it on the
system. brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
David Pelton
Sent: Wednesday, October
the
cabinet, loaded it into another and sent the cabinet back for repair. I got
it back, reloaded the software and off we went, job done and fixed. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Pauln
Sent: Thursday, October 07, 2010 13:43
similar,
but I do know for a fact that they use a 5ESS switch and it is probably
setup the same way. On the 5ESS the stutter and visual can be set separately
or combined. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Larry
Sent: Friday
Get rid of it and purchase a STICK. Does the same job. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Gary Siebring
Sent: Saturday, December 11, 2010 12:44
To: kxt@kxthelp.com
Subject: KX-T: Command Communications CS5500
Anybody know
http://www.download-manual.com/shop/Command-c-882.html
It will cost ya $9.00 to download it. Brad
-Original Message-
From: brad [mailto:bal...@frontiernet.net]
Sent: Saturday, December 11, 2010 12:56
To: 'Panasonic KX-T telephone system discussion list'
Subject: RE: KX-
Bob the TVS-200 is an old system. The new TVA will work much better. It is
possible you are starting to loose the hard drive. The simple thing to do is
troubleshoot it by checking to see just what is happening like does it
happen to a certain mailbox. There is an adjustment for amount of time to
li
The Good morning, afternoon and evening do NOT go away on a custom greeting.
They go away on a COMPANY greeting or turn them off in the prompt section.
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
D R
Sent: Sunday, January 02, 2011 23:25
To
You know what, it is real simple. Spring for the data card that gives you
internet access to the TVS50 Open the software and connect and do anything
anywhere you wish. It works great and the card gives the customer a great
feature of sending voicemail messages to email. I do not sell one without
th
not need
much at all. You do however need to open port 1 at the firewall to get
IN from the outside. Brad KB2CHY
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Wolfgang Boernert
Sent: Tuesday, January 04, 2011 09:29
To: 'Panasonic
: Remote change TVS-50
Brad tvS, not tvA
:-)
Charles
On Tue, Jan 4, 2011 at 2:57 AM, brad wrote:
> You know what, it is real simple. Spring for the data card that gives you
> internet access to the TVS50
>
_
I have one of those cards in service. I will check the crystal and see what
it is if I can easily. I would also look at the processor it is for and
check the specs on it and you may get a clue. Brad KB2CHY
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com
Where is this unit? Here in the States?
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
tahir hamid
Sent: Monday, February 28, 2011 12:53
To: Panasonic KX-T telephone system discussion list
Subject: Re: KX-T: KXTD1232
Thanks Brad for prompt
I have never gotten a TVS 100 which is very old compared to the features a
1232-6 has. You would have been much better off with a TVa50 as UCD works
sweet. I also found that there is a parameter in the 999 programming
concerning UCD I needed to turn on.. Brad
-Original Message-
From: kxt
Well it can be found on the dealers website and I believe it is on the disk.
You do need their USB driver for your PC to see the cabinet. I will have to
check my discs and see if I can find it for you. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com
with the 816 anyway.
Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Lancia Auto SA
Sent: Tuesday, March 22, 2011 16:00
To: 'kxt@kxthelp.com'
Subject: KX-T: hybrid capabilities
Good day.
at the back of my KXTD 408
I have a
Some PC's may have used up the USB ports for some reason and it might build
one at like port 5 and maybe with the default USB drivers they won't go that
far up. I use the PC to program my ham radio radios and I had to load a USB
driver from Kenwood to do that. Brad
-Original Message
goofy, and you have to reset the syatem before reloading
software, all cards are in the proper position according to default. If
one were to download an image to the cabinet array, the software will
balk and you will have to make a manual change...all from experience
folks...Brad
Check those tie
u find
"CO-". Very easy...its in the book under program 005 as well. Brad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of D.Pageau
Sent: Tuesday, February 17, 2004 2:21 PM
To: [EMAIL PROTECTED]
Subject: KX-T: Dial 9
Where I specify wich CO are
s not beat him all up with geek languages
and such. If a customer wants to spend in access of $4000.0 , Then buy
them the commercial software. I am all for a KISS system and combination
software brad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of A
This link will answer your question once and for all. Brad
http://www.telephones.com/upgrade.htm
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Harry from Select Telecom Systems,Inc.
Sent: Monday, May 03, 2004 6:46 AM
To: 'Miyake Tak US.';
This article will help everyone out. There are some 816 that will not go
to -6 according to the article.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Harry from Select Telecom Systems,Inc.
Sent: Monday, May 03, 2004 6:46 AM
To: 'Miyake Tak US.'; 'Michae
business mind you, it is 100% auto
attendant most of the time so the custom menu is set to enter a mailbox
at any time... Hope this helps..Brad
Support your local Ham Radio Operator s and Organizations
KB2CHY
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of
on so you may not
get ahold of anyone unless you call first thing tommorrow. Brad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
larry
Sent: Tuesday, May 17, 2005 5:43 PM
To: kxt@kxthelp.com
Subject: Re: KX-T: looking for 4 wire to 4wire E&M converte
The programator software for the 624 is different from that of a 1232. The
624 software is basically real time changes. Make a copy of your program,
reboot and reset the 624 and manually program a line to it. See if the
problem still occurs, reset and reload the saved software. Note changes in
oper
I have a simaliar problem. I have a system in a OBGYN office and it seems to
hang up on people. Mind you now, they want noone in the group that answers
to have voicemail. The AA is to keep the people on hold till they hang up or
get an answer. Any help would be appreciated Thanks Brad
le
to answer the call. Thanks...
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Michael Karaman
Sent: Saturday, July 09, 2005 12:25 PM
To: 'Brad Allen'; 'David Pelton'; [EMAIL PROTECTED]; 'KXT'
Subject: Re: KX-T: TVS125 Ques
can send it to you in the regular mail it is so small.. Brad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Support
Sent: Friday, July 08, 2005 2:18 PM
To: kxt@kxthelp.com
Subject: KX-T: Internal Mainboard Battery replacement for KXT 616 PBX
I found the
have checked it right on the phone with the office manager. Whats going on
here. Could the upgrade to the 220 from a 200 be missing the PBX control
lead/signal? That's really the only thing left that I can think of.
Any help would be appreciate
I think you mean vendor...I am the vendor
-Original Message-
From: Support (Datacom) [mailto:[EMAIL PROTECTED]
Sent: Monday, July 11, 2005 1:07 AM
To: Brad Allen; 'larry'
Cc: 'Dave'; kxt@kxthelp.com
Subject: Re: clock problems
Dear Brad,
It's seem like yo
be at
your phone. I set the callID to about 7 seconds and work downward to a good
number, ususlly 5 seconds. Brad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Jody Eiecom Mail
Sent: Tuesday, August 16, 2005 2:46 AM
To: 'Carl Navarro'; &#
What is this card?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Support
Sent: Tuesday, September 13, 2005 3:44 AM
To: Shawn Ceanga
Cc: kxt@kxthelp.com
Subject: Re: KX-T: First time 16SLC (KX-TD174DX) Card installation on
KX-TD1232
I have rebooted the s
I have a customer with a kxtd220 voicemail here in the USA. My problem is
this. The customer has a number of people answering the phone. The
extensions are in a UCD ring group. The customer does not want the calls to
go to any VM incuding the general mailbox 998. They want the call to be
placed on
a state
to change it. Brad
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.15/223 - Release Date: 01/06/2006
_
KX-T Mailing list --- http://kxthelp.com
I am installing a kva 200 and I changed the "Welcome to the Voice processing
system" prompt in guidance 1 to a welcome greeting for the customer. I have
placed guidance 1 in all places I could find yet it does not play. I did
check and it is where it belongs. Good M,A,E have been disabled. Doing a
Is it just one extension or the whole td170 card that's dead. What phones
are you using? What position is your card in? Brad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Charles Patterson
Sent: Wednesday, March 21, 2007 10:32 PM
To: Nolan
Cc
Be sure your plug from the cable is secure. Sometimes the screw is out too
far and causes the loss. Also see if all analog ports are working on the
extension card. Brad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Nolan
Sent: Wednesday, March 21, 2007
Still no match for Foster Brooks!!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Michael N. Marcus
Sent: Wednesday, March 21, 2007 1:03 PM
To: [EMAIL PROTECTED]
Cc: kxt@kxthelp.com
Subject: KX-T: drunken voicemail
We've been putting wacky emails online
Look in the display for BGM and turn it on or off from there. I believe code
35 has to have a 1 or 0 with it. Brad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Jason Zimberoff
Sent: Tuesday, March 27, 2007 3:59 PM
To: Larry
Cc: kxt@kxthelp.com
Subject
You may find timing and supervision issues. Brad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Raymond Martin
Sent: Wednesday, May 02, 2007 3:49 PM
To: kxt@kxthelp.com
Subject: KX-T: Comcast voice
The client needs to set up Comcast Digital voice for
That's not possible with a electronic phone. You Do however, if you are
using 7400 series phones, the use of 16 more ANALOG stations. You can also
just add an extension card. The 1232 is capable of 32 electronic and 32
analog extensions. Very easy to install as well. Any q's, let me
666 blocks have been around along time. They are proven as the best TELCO
connection device. Keep the separation of Telco and IT. There are a lot of
lives that depend on it.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Carl Navarro
Sent: Wednesday, May
Actually if you hit the "\" key a couple times u should get the 2 selection
menu. I use ProComm plus 3. it works all the time every time.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
David Lesher
Sent: Tuesday, September 25, 2007 8:30 PM
To: KXT Mailing
l have a way to change this. Brad (Local Telco tech for 40
years RETIRED)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Charles Patterson
Sent: Wednesday, October 10, 2007 10:00 PM
To: kxt@kxthelp.com
Subject: Re: KX-T: Extension Number in a Hotel
> I
an be played
in any player. Basically if they do this, the TVA50 becomes sort of an email
server. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Joseph Kral
Sent: Wednesday, September 14, 2011 09:42
To: Panasonic KX-T telephone system discu
TVS75 has 2 ports MAX. It is not suitable for 2 tenants at all unless of
course you do a custom that says for A company press 1 and for B company
press 2 and send each 1 and 2 to separate custom menus. Then you will have
the 2 ports for both. Send all calls via DIL 1:1 to EXT 165. Brad
what is
this low or high supposed to do? Brad 40+ years Telco, 20+ digital network.
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Michael Duffy
Sent: Friday, September 16, 2011 15:51
To: KXT Mailing list
Subject: KX-T: ISDN on a KXTD1232
H
fairly
cheap for what you get.
Parameters
Lucent 5ESS
BRI
2B+D
National or Custom
National is used everywhere.
Custom seems to be based in Rochester, NY (Another whole story)
You MUST be sure the CO matches what you have and it is YOUR gear that must
be compatible with the phone companies.
Brad A 20
Another unit that takes ISDN natively with the right cards is the small 6X24
IWATSU. Careful with this one, but you can get help on the web. Factory
probably won't help at all. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
David
>From the perspective of a tech at the local phone company. Here in the USA
there was, when it hit our area, AMI Lucent protocol ISDN. It was a failure
for Lucent because they lost the battle to set the standard. AMI cards were
pulled and replaced by the newer cards which the name of escapes me at
Bob, it is either in the Class of service of your catchall mailbox. Look for
message envelope setting.
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Bob Puff@NLE
Sent: Wednesday, September 28, 2011 18:57
To: 'KXT Help Forum'
Subject: KX-T: T
You do know that the extensions have to be set to ring in some manner to
have caller ID work? Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
cdc...@aol.com
Sent: Thursday, October 20, 2011 15:59
To: kxt@kxthelp.com
Subject: Re: KX-T
swers.
Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Chad W. Davis
Sent: Friday, October 21, 2011 10:09
To: Panasonic KX-T telephone system discussion list
Subject: Re: KX-T: Caller ID
Thank you, as always, for your generous help. Is
The small NANO by apple will work fine. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Chad W. Davis
Sent: Friday, October 21, 2011 11:25
To: kxt@kxthelp.com
Subject: KX-T: MP3 player for MOH
One last question for now,
We are
Contact Agilent, they rent gear out. If the wires are installed properly and
you use a tester to certify the network, you should have no issues. Besides
I would have gone Cat6 for a better network grade. VoIP sucks and they will
be much happier with the KXTD system.
-Original Message-
From
The system is designed ONLY to make one forward. Did you try using covering
extension at all. I do find the 824 restrictive in a lot of ways. Brad
KB2CHY
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Jim Schultz
Sent: Thursday, November 10
issue with
delayed notice on the system and I am not sure how you have this set up.
Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Don Resor
Sent: Thursday, November 24, 2011 23:36
To: KXT help List
Subject: KX-T: TVA50 Fax Notificati
I saw the mess coming as soon as all the CLECS started coming in. The goal
at the time was to be able to trace a call across the country from a
terminal. Good luck doing that now. Time Warner raises prices every 6
months. No regulation, just nasty people to deal with. The phone company had
to jump
How about a ring group. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
David
Sent: Thursday, January 26, 2012 00:40
To: kxt@kxthelp.com
Subject: KX-T: TDA50 ringing
Have a "50-50" [TDA & TVA] just installed in a in-hom
I believe in the 824, one must turn on the MOH at phone in programming. From
there it is toggled with the digit 1 with phone on-hook. I may be mistaken,
but I believe this is how it works. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
have remote access so I can see what is happening. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Bob Puff@NLE
Sent: Friday, June 01, 2012 2:59 AM
To: 'KXT Help Forum'
Subject: KX-T: TVA200 MW Notification Problems
Hi Guys,
I
pdate to -6 software. You get a few new features and the cabinets sync up
faster. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Charles Patterson
Sent: Friday, June 01, 2012 12:39 PM
To: Panasonic KX-T telephone system discussion list
Su
The guy who wrote the program has none little with it since a -6 came out.
You may want to run windows 7 in XP mode and it will probably work then for
you. I keep a win98 laptop, an old DELL 7000. It works, batteries are cheap,
easy to have around. Brad
-Original Message-
From: kxt-boun
Listen across the port and see if you hear the packet bursts on the XDP
port. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
John Burk
Sent: Sunday, June 03, 2012 1:40 AM
To: 'Panasonic KX-T telephone system discussion list'
S
171
card to provide call ID. I am wondering if there is something in the 900
area to turn on CID to SLT sets though. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Bob Puff
Sent: Saturday, June 02, 2012 8:57 PM
To: Panasonic KX-T
---Original Message-
> From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf
Of
> Brad Allen
> Sent: Saturday, June 02, 2012 3:47 PM
> To: 'Panasonic KX-T telephone system discussion list'
> Subject: Re: KX-T: KX-TD171 & TD1232 W/DUAL CABINETS -
I am going to take a step back here and ask if we are sure this is a -3
setup. Reason being, the very first application of CID to SLT was in the -3
unit. If it may have been said before, can you give us the software level of
both cabinets again please? Brad
-3 Adds.
74XX Series Phones.
KX
Well port 2 is your digital phone. You may be forcing it to not go to the
XDP ports. I will look at that in the manual. Did you say that was in the
130's in programming? Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
John Burk
The 171 cards are the proper ones for CID SLT to work. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
John Burk
Sent: Sunday, June 03, 2012 12:21 PM
To: 'Panasonic KX-T telephone system discussion list'
Subject: Re: KX-T
Can you call me on the phone at 5852473724 please?
Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
John Burk
Sent: Sunday, June 03, 2012 12:21 PM
To: 'Panasonic KX-T telephone system discussion list'
Subject: Re: KX-T: KX-TD17
Check program 612, check and be sure all lines are assigned to all slt/xdp
ports.
NOW I need to know the settings of programming 109. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
John Burk
Sent: Sunday, June 03, 2012 12:21 PM
To
I don't have a program 133 in my book. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
John Burk
Sent: Sunday, June 03, 2012 12:21 PM
To: 'Panasonic KX-T telephone system discussion list'
Subject: Re: KX-T: KX-TD171
e switch to send CID to the XDP ports.
This convinces me even more that there are additional settings somewhere
that I'm not aware of.
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Brad Allen
Sent: Sunday, June 03, 2012 10:45 AM
To:
Double ring sounds like a data security block on the extension. 791 comes to
mind but not sure. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Larry
Sent: Sunday, June 03, 2012 2:52 PM
To: Panasonic KX-T telephone system discussion list
Larry, program 133 says no caller ID will go to the xdp port if in parallel
mode, but it will work on the digital side. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Larry
Sent: Sunday, June 03, 2012 3:11 PM
To: Panasonic KX-T
es if call ID
works in power fail? There is no reason why Call ID will not work on all
extensions SLT side once working. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Larry
Sent: Sunday, June 03, 2012 1:12 PM
To: Panasonic KX-T teleph
o
may have to adjust the time between retries. I would bet the thing was not
working all that well to begin with. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Bob Puff
Sent: Sunday, June 03, 2012 8:41 PM
To: Panasonic KX-T telephone s
#x27;t
displaying CID. The CID continues to display on the digital phone screen.
In system programming I have set port 1 to send out the CID. (Originally I
thought port 2 was the XDP but from a phone conversation with Brad, I found
out that port 2 is digital and port 1 analog)
It's as if the
y what you are
doing. Some features are interactive with others.
F you have a modem on the system, I could easily beam in and take a peak at
it for you, other than that, I really don't see an issue from what you have
said. Brad
-Original Message-
From: kxt-boun...@kxthelp.com [
82 matches
Mail list logo
