I currently have about a dozen or so in the fieldnot much to them
electronically, mainly a couple of what appears to be emergency lighting
type sealed lead acid batteries.
The case is made of nice sturdy aluminum, and other than getting one with a
bad battery (which they promptly replaced) they
test..please ignore..(like my wife does)
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
On a similar thread, what's up with TD certification?..now that Panasonic
isn't offering it any more.
Will these boxes replace the KXTA stuff??
Jim
- Original Message -
From: "Carl Navarro" <[EMAIL PROTECTED]>
To: "don" <[EMAIL PROTECTED]>; "Bob Ivey" <[EMAIL PROTECTED]>
Cc:
Sent: Wedne
Anyone have the number handy for pana repair in
Suwanee GA?
Thanks, Jim
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
I know with the TD series you need a "9" first so the system goes to an
outside line..
Jim
- Original Message -
From: "Doug Brander" <[EMAIL PROTECTED]>
To:
Sent: Monday, February 21, 2005 4:22 PM
Subject: KX-T: kxta 6-24 one touch and speed dial
>I am having a helava time tryin
AMEN!!!
Jim
- Original Message -
From: "Mike Magnus" <[EMAIL PROTECTED]>
To: "kxthelp"
Sent: Monday, March 07, 2005 6:53 PM
Subject: Re: KX-T: ring voltage woes
> Why guess or measure? If it don't work at the demarc with a known good
> phone, call SBC; it's their problem.
>
> -MM
>
yes
- Original Message -
From: "Jim McAtee" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, April 19, 2005 8:28 PM
Subject: KX-T: Use analog pair without phone set?
> Can you connect a device such as a fax machine to the analog pair of a
> KX-TD1232 extension without going through the XDP port
Make sure BGM is not turned on the keyset.
Jim
- Original Message -
From: "Doug Brander" <[EMAIL PROTECTED]>
To:
Sent: Thursday, May 12, 2005 11:00 AM
Subject: KX-T: KXTA-624 Bizare problem with analog phone and propriatary
phoneon same extension
> Having a srtange problem that just
Turn on "Parallel extension"
Jim
- Original Message -
From: "Joel Winarske" <[EMAIL PROTECTED]>
To:
Sent: Thursday, July 07, 2005 8:27 PM
Subject: KX-T: XDP port ring with extension?
> I'm having trouble getting XDP port to ring with extension. I need an
> external ringer attached t
The last versions of this box did not have the external battery
pack.just a space where they used to go.
Jim
- Original Message -
From: "larry" <[EMAIL PROTECTED]>
To: "Support" <[EMAIL PROTECTED]>
Cc:
Sent: Sunday, July 10, 2005 12:18 PM
Subject: Re: KX-T: Internal Mainboard Batte
Thought this list was in English
?
Jim
- Original Message -
From: "Comuniredes" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, August 03, 2005 11:31 PM
Subject: KX-T: tarjeta
Hola a todos
Estoy buscando una tarjeta para una central telefónica VB9 de panasonic es
la ampliaci
p it and go on to
the next.
-George
On 04 Aug, 2005, at 5:24 AM, N D wrote:
Yeah
ENGLISH Pls...
Jim Schultz <[EMAIL PROTECTED]> wrote:
Thought this list was in English
?
Jim
- Original Message -
From: "Comuniredes"
To:
Sent: Wednesday, August 03,
Don't care THAT much!!!
Jim
- Original Message -
From: "David Pelton" <[EMAIL PROTECTED]>
To: "Jim Schultz" <[EMAIL PROTECTED]>; "George Gleason"
<[EMAIL PROTECTED]>; "'KXT Digest'"
Sent: Thursday, August 04, 2
For that short a run, I'd use some sort of marine cable.
Actually icky pic would do just fine.
I remember the local BOC running standard drop wire underwater to a few
island homes here several years ago, and we have many freeze/thaw cycles
here in the Northeastlasted "forever"...
Jim
-
You have to change the function of the flash key to "flash" or "external
feature access" in Panasonic lingo. The default is "recall" and the delay is
too long for a standard flash. I'm not where I have a manual handy, but it
is in the 990 feature set.
Jim
- Original Message -
From: <[E
It's an amplified speaker..made by WE, Precision, & ITT..probably others.
Basically, T&R in are on the red/green pair, 18VAC goes in on the
yellow/black.
As far as I know, the WE ones only used discrete components so we must be
talking about an ITT perhaps?
Handy little things.
If you mean "winning" it's spelled with two "n's"if you mean "whining "
it's spelled with an "h"
Jim
- Original Message -
From: "John Challenor" <[EMAIL PROTECTED]>
To: "Joey del Mundo" <[EMAIL PROTECTED]>;
Sent: Thursday, November 10, 2005 8:59 AM
Subject: Re: KX-T: Complaint
Is the system plugged into a UPS?
I've had some VERY strange problems when I tried to run TD boxes on certain
UPS's.
Good luck!
Jim
- Original Message -
From: "Dushyanth Harinath" <[EMAIL PROTECTED]>
To: "KX-TD500 Help"
Sent: Friday, December 02, 2005 4:37 AM
Subject: KX-T: KX-TD500 ring
And they do a GREAT job.just sent 4 cards in for repair today. Faster &
less expensive than Pana repair too!!
Unsolicited praise.
Jim
- Original Message -
From: "John Almont" <[EMAIL PROTECTED]>
To:
Sent: Thursday, January 19, 2006 3:44 PM
Subject: KX-T: Panasonic cards
> Communi
System programming can only be done from extension #101try it from that
extension.
Jim
- Original Message -
From: "Seraphin nzima" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, January 24, 2006 4:57 PM
Subject: KX-T: programmation 1232
When i start the programmation of my new 1232 -2,
Do you think they really care??
Too bad.great product with TERRIBLE support.
Jim
- Original Message -
From: "Michael N. Marcus" <[EMAIL PROTECTED]>
To: "fasteddy" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>;
Sent: Tuesday, January 24, 2006 5:42 PM
Subject: Re: KX-T: difference bet
The system waits to ring until it has caller ID information to display...the
CO sends this as FSK data between the first and second ring.
If the customer doesn't know the first ring ever occurred, what's the
difference?
If you have single line equipment connected ahead of the KSU (unless it an
Once again the dunderheads at Panasonic have left us with a little problem.
I have a hundred plus TD's installedand no way to provide additional
sets for replacements or adds.
The production of the 7453 series of sets has been cut WAY back (from what I
can tell) and are available only in li
Not exactly true Michael...
They are still a very good paperweight.
Jim
- Original Message -
From: "Michael N. Marcus" <[EMAIL PROTECTED]>
To: "cwc" <[EMAIL PROTECTED]>
Cc:
Sent: Friday, April 07, 2006 1:43 PM
Subject: Re: KX-T: 7600 series
> "Limited by 100%" means NOTHING WORKS.
>
>
Sounds like perhaps a phone (or two) are bad...how many sets are
dead/flashing? A short on the data pair (caused by a bad phone) will usually
affect 4 ports on the KSU. Unplug all dead/flashing sets, reset the KSU,
then plug them back in one by one. It's possible that there is a short in
the st
Don,
Rolf Taylor is a member of the clubs and also works for Telos Corptheir
home is right near you in Clevelandthey make excellent telephone hybrids
that are the backbone of the talkradio industry. Perhaps he will be able to add
some suggestions
Their products aren't inexpensive, bu
Have the computer dial 82 instead of 9...9 is first available idle line, 8 +
the line number is for access to a specific line.
Jim
- Original Message -
From: "douglas brander" <[EMAIL PROTECTED]>
To:
Sent: Friday, December 22, 2006 10:09 PM
Subject: KX-T: KXTA624 want easiest solution
The 624 doesn't do an A/D-D/A conversion...and most alarm panels use 9600 or
less anyway.
Jim
- Original Message -
From: "Techsupport" <[EMAIL PROTECTED]>
To: "Larry" <[EMAIL PROTECTED]>
Cc:
Sent: Saturday, December 23, 2006 11:01 AM
Subject: Re: KX-T: KXTA624 want easiest solution to
Been running exactly this combination on my own 1232 for almost two years
and it works flawlessly, CID and all the other features work just fine. The
VOIP line is about 90% compared with POTS. Occasionally there is noticeable
latency, but usually a hang up and redial solves the problem.
Jim
--
I believe the DSL filter is trapping out that pulse...
Can they move your DSL service to another line not on the system? Perhaps a
fax line?
Jim
- Original Message -
From: "Nikos K. Kantarakias" <[EMAIL PROTECTED]>
To:
Sent: Saturday, March 10, 2007 6:04 AM
Subject: KX-T: KXTD816 chargin
Hm.
With 24 stations on the box, unless extension numbers have been
reprogrammed, where is 129 coming from?
Jim
- Original Message -
From: "Charles Patterson" <[EMAIL PROTECTED]>
To: "Nolan" <[EMAIL PROTECTED]>
Cc:
Sent: Wednesday, March 21, 2007 10:31 PM
Subject: Re: KX-T: ext
varro" <[EMAIL PROTECTED]>
To: "Jim Schultz" <[EMAIL PROTECTED]>; "Charles Patterson"
<[EMAIL PROTECTED]>; "Nolan" <[EMAIL PROTECTED]>
Cc:
Sent: Thursday, March 22, 2007 9:42 AM
Subject: Re: KX-T: extension 129 problem
> At 09:04 AM 3/22/2007
Holy moly
APRIL FOOLS
Get it?
Jim
- Original Message -
From: "fasteddy" <[EMAIL PROTECTED]>
To: "Mark" <[EMAIL PROTECTED]>;
Sent: Monday, April 02, 2007 7:08 PM
Subject: Re: KX-T: Panasonic confirms plan to sue competitors for royalties
on use of “
I had one with this problem although it was a TD 816.
The surge protection was "chopping" the ring signal.
There was a constant very low current higher voltage AC on the line
presumably induced from high tension power lines. This accompanied by the
48VDC battery was enough with the 100 volt 20
Excellent questionI've been wondering that for a while now.
Jim
- Original Message -
From: "David Lesher" <[EMAIL PROTECTED]>
To: "KXT Mailing list"
Sent: Saturday, April 07, 2007 5:14 PM
Subject: KX-T: how bad is a TA-82492, anyhow?
> Everything seems to say the 824's VM option ca
The system requires at least one line with CID for the clock update feature
to work.
Jim
- Original Message -
From: "Jim McAtee" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, April 18, 2007 5:33 PM
Subject: KX-T: KX-TD1232 Clock Synch
>I noticed the thread several weeks ago regarding KX-TD
, or is there a place in the
> KX-TD1232 to set the timezone?
>
> Jim
>
>
> - Original Message -
> From: "Jim Schultz" <[EMAIL PROTECTED]>
> To: "Jim McAtee" <[EMAIL PROTECTED]>;
> Sent: Wednesday, April 18, 2007 3:44 PM
> Su
My aging memory seems to remember it being available somewhere around -2
or -3.but I'm not certain. I AM certain that it wasn't available from
the "beginning"..
Jim
- Original Message -
From: "Joe Childs" <[EMAIL PROTECTED]>
To: "Jim Sch
77xx series
Jim
- Original Message -
From: "Joe Childs" <[EMAIL PROTECTED]>
To: "Gary & Bev Siebring" <[EMAIL PROTECTED]>
Cc:
Sent: Wednesday, April 18, 2007 8:19 PM
Subject: Re: KX-T: Compatable phones
> 30850
> 30820
> 30830
> 61650
> 61620
> 61630
> 61631 (black)
> 61640 console
> 1
A clumsy kludge, but if you have extra CO's available you could parallel the
line on two CO's of the KSU.one set for CID, one notthe non-CID line
would ring immediately
Just a thought
Jim
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>;
Sent: Mo
Hi All,
I'm not in the office and I'm brain dead at the moment. What is the code for
"idle line preference" in the ancient analog 1232 box? I remember 721# is for
the 616, but can't for the life of me remember the code for the 1232.
Thanks
Jim
___
I'm SURE this is a stupid question, but how does one access the internal modem
(supposedly included in the basic package) from a remote computer on the
TA824. I can figure out the access in the programming software, but how does
one access the internal modem? What is it's extension number? I re
Steel conduit in the air? I think he meant it was strung "aerially".
Welding arcs are very rich in RF that covers a HUGE amount of radio spectrum
at a rather high field strength.
You are on the right track with using "chokes"...(I think you misspelled
chocks). I don't think grounding the
It is waiting for the hard drive to "wake up"it goes to sleep after a
time of no use.
After the first call it handles, subsequent calls should be answered more
quicklyuntil it goes to sleep again. I don't know if this feature can be
defeated through programming.
Jim
- Original Mes
Use 77XX series setsbet they work fine.
Jim
- Original Message -
From: "x x" <[EMAIL PROTECTED]>
To: "k x"
Sent: Thursday, November 15, 2007 12:42 PM
Subject: Re: KX-T: Proprietary Phone Wiring Problem
Thanks for the advice. We have fiber between the buildings and the longer
te
Afternoon,
Need to know how to turn on ring back tone during transfer with this setup
(instead of MOH).
I must be brain dead today.
Thanks
Jim
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.co
Found itonly two pages in too!!
In "System" go to "Main"...under "Music on Hold", check "Tone" instead of
external.
Jim
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kx
Doing this combination for the first time.when I set the call forwarding
for "busy/no answer" both the FWD/DND button and the DSS button for that
station flash continuously.
Two questions: why does the DSS button even do anything???what's the purpose?
and is there an option to change from
Thanks Donald and all,
I know we could change the FWD/DND lamp to "steady" in the later versions of
the TD series, guess this is not an option on the TA824.
The thing that was driving me crazy was the DSS buttons were also flashing
for all stations with FWD set.both Steve and Shawn pointed
There's bit in PGM 990 that turns on or off the "automatic time update with
caller ID"sorry I don't have a manual handy to tell you exactly the area
and field.
Jim
- Original Message -
From: "Wolfgang" <[EMAIL PROTECTED]>
To: "'brucek'" <[EMAIL PROTECTED]>; "'kxt help'"
Sent: Sund
>I agree.once the local telco sent a time of 2500 hours
>
> The box needed a reset.
>
> Jim
>
> - Original Message -
> From: "Erling Lassesen" <[EMAIL PROTECTED]>
> To: "'Jim Schultz'" <[EMAIL PROTECTED]>
&g
Sounds like a short on one of the portsusually only affects a group of 4
phones however.
Look for a bad set, compromised IW, or a bad jack.
Are they SURE it is on ALL wired phones?
Jim
- Original Message -
From: "David Jeter" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, January 08, 20
I think you will find it is a group of four consecutive ports. 1-4, 5-8,
9-12, etc.
Check the AMP connector at the KSU looking for green or discolored
connections.
If all looks well, disconnect the stations affected...at the phones and at
the MDF.
Meter the data pairs with a Sidekick or somet
Excellent tip Wolfgang!
Some older (very old???) 2500 style sets also shorted 1&4 for A lead control
(remember THAT??).
An old Trimline or Princess set connected to the system using all 4 wires
could cause a problem as well they had an incandescent bulb connected to
pins 1&4 that very well
Or replacing the batteries because the set "didn't talk up good" anymore???
All kidding aside, I DID have to replace talk batteries on an old local
battery magneto intercom system at a camp here in rural NW CT...the local
telco abandoned it
That was 20 years ago thoughwish I had managed
Got an interesting one at the end of the day Friday...
A customer with a TD 816 and 7453 sets has one station that has no lights on
any of the buttons. She swapped the set with anotherthis worked for a
while, but then they quit lighting again.
After hundreds of installs with the TD product,
The caller ID card was only included with the dash 7 revision. You DO need
to open the box, not just the cover, to install..or even check..the caller
ID card.
Jim
- Original Message -
From: "Bill Cerny, Grantville Associates" <[EMAIL PROTECTED]>
To:
Sent: Monday, April 07, 2008 1:32 PM
Bob,
Try 914-631-9960. Your local NXX might work as well and you SHOULD use a
local one for actual CKT Loss measurements, but for what you are attempting
any generic 1004 Hz tone should suffice.
Let us all know how you make out!
Best, Jim
- Original Message -
From: "Bob" <[EMAIL PRO
.another quick thought
If the audio level coming out of the cable ATA is too hot, it could be
causing crosstalk in the switch, also beware of excessive loop current out
of the ATA.
>From all my experience with Panasonic I have never found them to have
crosstalk issues...
Jim
- O
Hi Russ,
Assuming that the 2 pair cabling is connected properly, analog sets like the
7130 will NOT work if XDP is assigned to that port (pgm 600).
Analog sets need a separate talk and data path, unlike the digital sets
which use the data pair for both talk and data.
Let us know if that's the
Sounds like nightmare time Don!
There are a whole bunch of things that could be causing xtalk, but as a
quick, inexpensive, "shotgun" solution, I'd isolate the paging amp from the
1232 with a Bogen WMT-1 transformer
They call this a Hiz in, 600ohm out xfmr, but in reality it's pretty close
Also John at Communicator Tel has great prices on nicely refurbished
sets
I'm out of town right now and don't have his address handy, but a quick
Google search will surely find him.
Jim
- Original Message -
From: "Bill Walters" <[EMAIL PROTECTED]>
To:
Sent: Friday, July 18, 2008 4
Anyone have the ANA number for Comcast and Charter Communications?
For Cablevision it is *99.
Thanks, Jim
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
Bruce
Couple of ideas. If the off premise stations work fine on another port, it's
not a grounded/unbalanced pair from the telco.
One idea, if you have spare ports that work, abandon the defective ones, use
the spares and change the itcm numbers in programming.
Additionally, I would use a
Morning all,
I've RTFM but can't find if there is a way to specify the order in which the TA
824 selects lines when idle line preference is enabled. I know that this is an
option on the TD series, but can't for the life of me find a setting on the 824
for this feature. Anyone able to help?
Tha
Does it just stop?? Does a CO line light up? Is it a particular CO only?
I've had cordless sets "self answer" before, also high resistance or wet
cable/jacks on the station side could be breaking down and tripping
ringing...
We need more info to properly diagnose the trouble.
Jim
- Original
How about adding a 1 before the numbers on the table?
Sounds weird though, try and look at what the Vonage box is actually
spitting out to the switch before you go much further
Jim
- Original Message -
From: "John Burk" <[EMAIL PROTECTED]>
To: "Panasonic Help Forum"
Sent: Saturday
I think Larry has the answer here
My feeble brain now remembers when we went from CID to CID "with name"
service, my old translation tables quit working...
Jim
- Original Message -
From: "Larry" <[EMAIL PROTECTED]>
To:
Sent: Saturday, November 01, 2008 10:11 PM
Subject: Re: KX-T:
Surge protection has been compromised (done it's job) and is breaking
down with ring voltage.
Replace the Panamax I'll bet all if fine again.
Jim
- Original Message -
From: "Dallas Dingle" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, November 05, 2008 4:58 PM
Subject: KX-T: 824 extens
Half way there..disable XDP and set for parallel extension...
Jim
- Original Message -
From: "Raymond Martin"
To:
Sent: Wednesday, January 07, 2009 6:00 PM
Subject: KX-T: KX-TD1232 strobes on XDP port
> HI,
> Trying to set up strobes on a 1232. In the old 1232-11D we just set up
Hi all,
Re: the KXTA 824 RTFM and can't find a way to delay ringing until after caller
ID data is sentthis was standard in the TD's. Is there a way with this box?
Thanks,
Jim
_
KX-T Mailing list --- http://kxthelp.com/
Subscript
Push "1"...listen to BGM...it should be about the same level as dialtone on
the set's speaker.
If not, do what others have suggested and pad the music source down to an
acceptable level...
FWIW, it seems to want a -10 at most...
Jim
- Original Message -
From: "Marc Halberg"
To: "'Car
I know this has been discussed before but can't find the answers so please
excuse if this is a repeat for anyone
A customer (KXTD 1232/TVS 90) says messages are taking up to two hours to show
up in their mailboxes..(perhaps it's just two hours to light the MW lamp, not
sure)...
Any ideas?
All ports are set up for MW light, it's a 1232 with only 10 or so stns,
works fine MOST of the time, just occasionally the delay occurs
Jim
- Original Message -
From: "brad"
To: "'Jim Schultz'"
Sent: Tuesday, April 28, 2009 10:55 AM
Subject:
Careful with Panasonic RepairI was just quoted $305.00 to repair a 7896
that had a blank displaythat's more than a new one costs me! I called
and let them know I wasn't pleased, for all the good that will do...
Jim
- Original Message -
From: "John Challenor"
To: "Sid Davidow
While we're on this subject, has anyone figured out how to "marry" 78XX
series handsets and bases? Over the years I've collected a few of each and
it would be great if they didn't have to go to Suwanee to be synched with
one another
Jim
- Original Message -
From: "Bob Bruskin"
ctive than Suwanee.
Happy New Year,
Jim
- Original Message -
From: "Bob"
To: "Jim Schultz" ;
Sent: Thursday, December 31, 2009 11:23 AM
Subject: Re: KX-T: KXT-7885
I found the name of the repair person that I have used with high success
for cordless Panasonic phone
My guess is the surge protector...sounds like it is breaking down and
tripping ringing...often after multiple hits the breakdown voltage gets
lower and lower...
I also had a problem once where a cordless set was not seated well in the
base and it was "self answering" after a couple of rings...
Hi all,
I need Widows 7 drivers for the TA824 and TVA50...do they exist? Anyone have
them handy?
Thanks in advance,
Jim
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
Defective ring generatorthe Pana keysets do not use the high voltage
ring generator to signal incoming ring.
Jim
- Original Message -
From: "Gary Vodvarka"
To:
Sent: Monday, June 21, 2010 6:34 PM
Subject: KX-T: KXT 6x16
I just bought a used panasonic 6x16 switch that works gre
Boy, I'm with you! The menu driven stuff is terribly difficult to explain to
the older clientstypically the ones who can afford a $400.00 cordless
set.
Jim
- Original Message -
From: "Dallas Dingle"
To:
Sent: Monday, July 12, 2010 11:35 AM
Subject: KX-T: Cordless Issues
We
Happy New Year all.
Brain fart...how do I change custom service prompts remotely, not how do I
record them, how do I switch between them??
Thanks!
Jim
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http
ecializing in Panasonic Communication System Solutions since 1981"
-Original Message-
From: Jim Schultz [mailto:jamesschu...@optonline.net]
Sent: Sunday, January 02, 2011 4:20 PM
To: kxt@kxthelp.com
Subject: KX-T: Remote change TVS-50
Happy New Year all.
Brain fart...how do I chan
Good afternoon,
Can't find an option to display CID on a proprietary phone that is already on
line one, when line two, three, etc. rings...
What am I missing?
Thanks for any and all help!
Jim
_
KX-T Mailing list --- http://kxthelp
iscussion list"
Sent: Tuesday, July 05, 2011 1:33 PM
Subject: Re: KX-T: TA 824 question
Still the call waiting 7311 command
Sent from my iPod
On Jul 5, 2011, at 1:30 PM, Jim Schultz
wrote:
Good afternoon,
Can't find an option to display CID on a proprietary phone that is
alread
Looking for an easy way to accomplish the following
Stn 102, no answer fwd to stn 103, if no answer/busy fwd to VM. Ideally, the
msg light would light on 102 or on both 102 and 103. Since the 824 can only FWD
once, is this possible?
As always, TIA for any help!
Jim
sages to 102
automatically
This way 102 & 103 gets message
Wolfgang
NTC
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf
Of
Jim Schultz
Sent: Tuesday, November 08, 2011 15:11
To: kxt@kxthelp.com
Subject: KX-T: TA 824 w/TVA50
Looking for
87 matches
Mail list logo
